Weimin Sun,Xudong Chen,Jiabin Wang,Hang Jiang,Anzhi Wang,Qi Yan,Zhenyu Ma,Shengjia Wang,Tao Geng,Yue Zhong,Zhongquan Qu,Yunxiang Yan
Abstract:Focal Ratio Degradation (FRD) in fibres is a crucial factor to control in astronomical instruments in order to minimize light loss. As astronomical instrumentation has advanced, the integration of large populations of fibres has become common. However, determining FRD in multiplexed fibre systems has become a challenging and time-consuming task. The Integral Field Unit for the Fiber Arrayed Solar Optical Telescope (FASOT-IFU) represents the most densely arranged fibre-based IFU in a single unit. Due to the close packing of fibres in the V-groove of the slit end, measuring FRD is particularly challenging as the output spots are prone to overlapping with adjacent fibres. In this paper, a novel method based on the quasi-near field model is proposed to enable rapid FRD measurement in highly multiplexed fibre systems like IFUs and multi-object observation systems. The principle and uncertainties associated with the method are investigated. The method's validity is demonstrated by applying it to determine the FRD in FASOT-IFU, with the achieved FRD performance meeting the acceptable requirements of FASOT-IFU, where the output focal ratio primarily falls within the range of 5.0-7.0. The results indicate that the proposed method offers several advantages, including the simultaneous and rapid measurement of FRD in multiple fibres with high accuracy (error smaller than 0.35 in F-ratio). Furthermore, besides FRD, the method exhibits potential for extensive measurements of throughput, scrambling, and spectral analysis.
What problem does this paper attempt to address?
### Problems the Paper Aims to Solve
This paper aims to address the issue of quickly measuring Focal Ratio Degradation (FRD) in highly multiplexed fiber systems. With the advancement of astronomical instrumentation technology, integrating a large number of fibers has become a common practice. However, determining FRD in highly multiplexed fiber systems has become both challenging and time-consuming. Particularly for densely packed fiber systems like the Fiber Array Solar Optical Telescope Integral Field Unit (FASOT-IFU), the close arrangement of fibers in V-grooves makes the output spots prone to overlap, making FRD measurement especially difficult.
### Background and Motivation
1. **Application of Fibers in Astronomy**:
- Fibers are widely used in modern astronomy to connect the telescope's field of view with scientific instruments, mainly for multi-object observations and integral field spectroscopy (IFS).
- Multi-object observations use discrete fibers to obtain the spectra of individual celestial objects, improving observational efficiency.
- Integral field spectroscopy achieves high spatial resolution and densely packed fibers through microlens arrays, image slicers, or fibers (alone or combined with microlens arrays).
2. **Importance of FRD**:
- FRD refers to the increase in spot size during fiber transmission, leading to a decrease in the focal ratio, thereby affecting the system's throughput and point spread function (PSF).
- Evaluating FRD is crucial for designing fiber-fed spectrograph systems as it helps understand system throughput and assess the PSF.
3. **Limitations of Existing Methods**:
- Existing FRD measurement methods are typically suitable for far-field measurements of single fibers, such as the collimated beam method and the converging beam method.
- In multi-object observations and IFS surveys, hundreds to thousands of fibers are integrated and rearranged into a slit for input into the spectrograph, making extensive fiber testing very time-consuming.
- Due to the small fiber spacing, output spots are prone to overlap, making it difficult to record independent spots under far-field conditions.
### Proposed Method
To overcome these challenges, this paper proposes a new method based on a quasi-near-field model for quickly measuring FRD in highly multiplexed fiber systems. Specifically:
1. **Quasi-Near-Field Model**:
- The quasi-near-field model uses a magnified 4F imaging system to bring the imaging plane close to the fiber output end, ensuring that the output spots of each fiber can be separately recorded.
- This method adjusts the cone angle of the output light field by changing the magnification of the imaging system and ultimately corrects the measured focal ratio.
2. **Parallel Analogy Method**:
- As the fiber array density increases and the fiber spacing decreases, the non-overlapping region significantly reduces, resulting in a Fresnel number greater than 1.
- In this case, the parallel analogy method can simultaneously measure the FRD of multiple fibers within a limited operational space.
- This method is based on the linear relationship of the focal ratio, determining the focal ratio of the fibers to be tested using a known reference fiber's focal ratio.
### Validation and Results
1. **Experimental Setup**:
- The fiber arrangement of FASOT-IFU and the experimental setup of the quasi-near-field method are described in detail.
- The experimental setup includes a light source, collimator, imaging system, and multi-axis translation stage for recording output spots.
2. **Error Analysis**:
- The impact of uncertainties in distance and spot size measurements on the focal ratio is analyzed.
- The alignment errors at the input and output ends, the calculation accuracy of spot size estimation, and the error tolerance under different focal ratios are discussed.
3. **Preliminary Measurement Results**:
- The method was applied to measure the FRD of FASOT-IFU, and the results showed that the measured focal ratios met the acceptable requirements of FASOT-IFU, with output focal ratios mainly in the range of 5.0-7.0.
- The method can quickly measure the FRD of multiple fibers simultaneously with high accuracy (error less than 0.35 of the F-ratio) and also demonstrates potential in measuring throughput, mixing, and spectral analysis.
In summary, this paper proposes a new method based on a quasi-near-field model, effectively solving the problem of FRD measurement in highly multiplexed fiber systems, providing strong support for the design and optimization of fiber-fed spectrograph systems in the field of astronomy.