Abstract:Abstract Recently, 3D porous graphene–polymer composite-based piezoresistive sensors have gained significant traction in the field of flexible electronics owing to their ultralightweight nature, high compressability, robustness, and excellent electromechanical properties. In this work, we present an improved facile recipe for developing repeatable, reliable, and linear 3D graphene–polydimethylsiloxane (PDMS) spongy sensors for internet of things (IoT)-enabled wearable systems and smart consumer products. Fundamental morphological characterization and sensing performance assessment of the piezoresistive 3D graphene–polymer sensor were conducted to establish its suitability for the development of squeezable, flexible, and skin-mountable human motion sensors. The density and porosity of the sponges were determined to be 250 mg cm −3 and 74% respectively. Mechanical compressive loading tests conducted on the sensors revealed an average elastic modulus as low as ∼56.7 kPa. Dynamic compressive force-resistance change response tests conducted on four identical sensors revealed a linear piezoresistive response (in the compressive load range 0.42–2.18 N) with an average force sensitivity of 0.3470 ± 0.0794 N −1 . In addition, an accelerated lifetime test comprising 1500 compressive loading cycles (at 3.90 N uniaxial compressive loading) was conducted to demonstrate the long-term reliability and stability of the sensor. To test the applicability of the sensors in smart wearables, four identical graphene–PDMS sponges were configured on the fingertip regions of a soft nitrile glove to develop a pressure sensing smart glove for real-time haptic pressure monitoring. Similarly, the sensors were also integrated into the Philips 9000 series electric shaver to realize smart shaving applications with the ability to monitor shaving motions. Furthermore, the readiness of our system for next-generation IoT-enabled applications was demonstrated by integrating the smart glove with an embedded system software utilizing the an open source microcontroller platform. The system was capable of identifying real-time qualitative pressure distribution across the fingertips while grasping daily life objects, thus establishing the suitability of such sensors for next-generation wearables for prosthetics, consumer devices, and personalized healthcare monitoring devices.

3D‐Printed PDMS/Graphene Sensors with Tunable Sensitivity via Temperature‐Induced Crosslinking for Pressure Applications

A flexible piezoresistive pressure sensor comprising a microstructure printed with poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) copolymers@graphene hybrid ink

Highly Sensitive and Flexible Tactile Sensor Based on the Fabrication of Porous Graphene/Silicone Rubber Composites

3D-Printed Graphene Nanoplatelets/Polymer Foams for Low/Medium-Pressure Sensors

Highly Flexible and Sensitive Pressure Sensor: Fabrication of Porous PDMS/Graphene Composite via Laser Thermoforming

High-Performance Flexible Piezoresistive Pressure Sensor Printed with 3D Microstructures

3D Printing of Highly Sensitive and Large-Measurement-Range Flexible Pressure Sensors with a Positive Piezoresistive Effect

Design of Flexible Pressure Sensor Based on Conical Microstructure PDMS-Bilayer Graphene

3D printed graphene/polyurethane wearable pressure sensor for motion fitness monitoring

3D-Printable Carbon Nanotubes-Based Composite for Flexible Piezoresistive Sensors

Flexible Pressure Sensor Based on a Thermally Induced Wrinkled Graphene Sandwich Structure

3D Printed Skin‐Inspired Flexible Pressure Sensor with Gradient Porous Structure for Tunable High Sensitivity and Wide Linearity Range

Flexible pressure sensors based on reduced graphene oxide @ porous silicone elastomers with good resolution and wide working range

1,2,4-Diazaphospholide complexes of lanthanum(iii), cerium(iii), neodymium(iii), praseodymium(iii), and samarium(iii): synthesis, X-ray structural characterization, and magnetic susceptibility studies.

The Piezoresistive Pressure Sensors with Elastic Graphene-Coated Silicone Spheres

Piezoresistive 3D graphene–PDMS spongy pressure sensors for IoT enabled wearables and smart products

Fabrication of a Sensitive Strain and Pressure Sensor from Gold Nanoparticle-Assembled 3D-Interconnected Graphene Microchannel-Embedded PDMS

Highly Sensitive and Flexible Capacitive Pressure Sensors Based on Vertical Graphene and Micro-Pyramidal Dielectric Layer

Structurally Designed Hydrogel-Based Pressure Sensors for Wearable Sensing

Pomegranate-Inspired Biomimetic Pressure Sensor Arrays With a Wide Range and High Linear Sensitivity for Human–Machine Interaction

3D Printing of a Flexible Inclined‐Tip Cone Array‐Based Pressure Sensor