Compact QEPAS humidity sensor in SF6 buffer gas for high-voltage gas power systems
Xukun Yin,Lei Dong,Hongpeng Wu,Miao Gao,Le Zhang,Xueshi Zhang,Lixian Liu,Xiaopeng Shao,Frank K. Tittel
DOI: https://doi.org/10.1016/j.pacs.2021.100319
IF: 9.656
2022-03-01
Photoacoustics
Abstract:In SF<sub>6</sub> insulated high-voltage gas power systems, H<sub>2</sub>O is the most problematic impurity which not only decreases insulation performance but also creates an acidic atmosphere that promotes corrosion. Corrosion damages electrical equipment and leads to leaks, which pose serious safety hazards to people and the environment. A QEPAS-based sensor system for the sub-ppm level H<sub>2</sub>O detection in SF<sub>6</sub> buffer gas was developed by use of a near-infrared commercial DFB diode laser. Since the specific physical constants of SF<sub>6</sub> are strongly different from that of N<sub>2</sub> or air, the resonant frequency and <i>Q</i>-factor of the bare quartz tuning fork (QTF) had changed to 32,763 Hz and 4173, respectively. The optimal vertical detection position was 1.2 mm far from the QTF opening. After the experimental optimization of acoustic micro-resonator (AmR) parameters, gas pressures, and modulation depths, a detection limit of 0.49 ppm was achieved for an averaging time of 1 s, which provided a powerful prevention tool for the safety monitoring in power systems.
engineering, biomedical,radiology, nuclear medicine & medical imaging,instruments & instrumentation