Abstract:We have designed, optimized, fabricated and characterized highly reflective quasi-omnidirectional (angular range of $0-60^\circ$) multilayered structures with a wide spectral range. Two techniques, chirping (a continuous change in thicknesses) and stacking of Bragg-type sub-structures, have been used to enhance the reflectance with minimum thickness for a given pair of refractive indices. Numerical calculations were carried out employing the transfer matrix method and we optimized the design parameters to obtain maximal reflectance averaged over different spectral ranges for all angles. We fabricated some of the optimized structures with porous silicon dielectric multilayers with low refractive contrast and compared their measured optical properties with the calculations. Two chirped structures with thicknesses 21.6 $\mu$m and 60.4 $\mu$m, resulting in quasi omnidirectional mirrors with bandwidths of 360 nm and 1800 nm, centered at 1160 nm and 1925 nm respectively have been shown. In addition, we fabricated a stacked sub-Bragg mirror structure with a quasi omnidirectional bandwidth of 1800 nm (centered at 1850 nm) and a thickness of 41.5 $\mu$m, which is almost two third (in thickness) of the chirped structure. Thus, our techniques allowed us to obtain relatively thin quasi-omnidirectional mirrors with wide bands over different wavelength ranges. Our analysis techniques can be used for the optimization of the reflectance not only in multilayered PS systems with different refractive index contrasts but also for systems with other types of materials with low refractive index contrast. The present study could also be useful for obtaining omnidirectional dielectric mirrors in large spectral regions using different materials, flat focusing reflectors, thermal regulators, or, if defects are included, as filters or remote chemical/biosensors with a wide angular independent response.

Broadband high-reflection multilayer coatings at oblique angles of incidence

Wide-angle Broadband Antireflection with Nano-taper Hydrated Alumina Film

Wide-angle Broadband Antireflection Coatings with Nano-Taper Hydrated Alumina Film.

High-efficiency, polarization-independent back reflector

A Broadband Reflector Using a Multilayered Grating Structure with Multi-Subpart Profile

Optimization of wide-band quasi-omnidirectional 1-D photonic structures

Wide-angle broadband antireflection coatings based on boomerang-like alumina nanostructures in visible region

Broadband, millimeter-wave antireflection coatings for large-format, cryogenic aluminum oxide optics

Design and analysis of broadband guided-mode resonant reflectors with coated triangular and trapezoidal profiles in TE polarization

A Multilayer-Based Wideband Reflector Utilizing a Multi-Subpart Profile Grating Structure

Near-infrared antireflection coating operated with broad incident angles

Wideband Reconfigurable Reflectarray Based on Reflector-Backed Second-Order Bandpass Frequency Selective Surface

Precise broad-band anti-refection coating fabricated by atomic layer deposition

Broadband near-infrared reflector based on double-layer subwavelength gratings

Broadband and Wide-Angle Antireflection Realized by Multireflection Effect in a Micro-∧-shape Array.

A High Performance Polarization Independent Reflector Based on A Multilayered Configuration Grating Structure

New principle for unpolarized wideband reflectors

Single-layer Reflectarray with Novel Elements for Wideband Applications

Reducing Light Scattering of Multilayer Dielectric High-Reflection Coatings Through Film System Optimization Design

Low-Profile Reflective Surface for Multi-Band Linear-to-Linear and Linear-to-Circular Polarization Conversion

Single Layer Reflectarray with Modified Cross Loop Element for Wideband Applications