Abstract:The analytical performances of a coupled hydride generation, integrated atom trap (HG-IAT) atomizer flame atomic absorption spectrometry (FAAS) system were evaluated for determination of Ge and Sn and inorganic tin species in environmental samples. Germanium and tin hydrides were atomized in air-acetylene flame-heated IAT. A new design of HG-IAT-FAAS hyphenated technique that would exceed the operational capabilities of existing arrangements (a water-cooled single silica tube, double-slotted quartz tube) permitting construction of an “integrated trap” was investigated. For the estimation of Sn(II) and Sn(IV) concentrations in samples, the difference between the analytical sensitivities of the absorbance singnals obtained for tin hydride without and with previous treatment of samples with L-cysteine could be used. The concentration of Sn(IV) was calculated by the difference between total Sn(tot) and Sn(II). An improvement in limit of detection was achieved compared with that obtained using any of the aforementioned atom trapping techniques separately. The concentration limits of detection were 25 and 8 ng mL−1 for Ge and Sn, respectively. For a 2 min in situ preconcentration time, sensitivity enhancement, compared to FAAS, were 10 and 14 folds for Ge and Sn, respectively, using hydride generation atom trapping technique. The sensitivity can be further improved by increasing the collection time. The relative standard deviations (RSDs) are of the order of 5–10% for this hyphenated technique. The designs studied include slotted tube, single silica tube, and integrated atom trap water-cooled atom traps. The accuracy of this method was tested by analyses of BCS-CRM No.346 (Alloy), GBW 07302 (Stream Sediment), PACS-1 (Marine Sediment), NBS SRM 1633a (Coal Fly Ash), and NIST SRM 1643e (Trace Element in Water) certified reference materials. Agreement between analytical results and certified values for the test elements Ge and Sn (in the range of 1.7–91.0 µg g−1) were in agreement with recommended values. The measured Ge and Sn contents in five referenced materials were in satisfactory agreement with the certified values. The hyphenated technique was applied for germanium and tin determination in coal fly ash, soil, sediment, garlic, sewage, and river water.

Analysis of high-purity germanium dioxide by ETV-ICP-AES with preliminary concentration of trace elements

Analysis of High-Purity Germanium Dioxide by Inductively Coupled Plasma Atomic Emission Spectrometry with Reaction Distillation of the Matrix

Determination of Rare Impurities in High-Purity Germanium and Germanium Oxide by Inductively Coupled Plasma Atomic Emission Spectrometry

History and recent advances in elemental analysis of germanium-based functional materials

Hydride Generation Inductively Coupled Plasma Atomic Emission Spectrometry for the Determination of Germanium in Iron Meteorites

Determination of Trace and Ultra-Trace Amounts of Germanium in Environmental Samples by Preconcentration in a Graphite Furnace Using a Flow Injection Hydride Generation Technique

Analysis of Cerium-Substituted Yttrium Iron Garnets Using Inductively Coupled Plasma Atomic Emission Spectrometry with Preliminary Decomposition in a Microwave System

Determination of matrix composition of Ge-Se-Te chalcogenide glasses using the ICP-AES method

Highly sensitive analysis of trace germanium derived from the efficient electrosynthesis and spectral introduction of GeH4 on foam electrode

Development of Methods for Sample Preparation and Introduction into Excitation and Ionization Sources for Combined Procedures of Atomic Emission and Mass Spectral Analysis

L‐Cysteine Enhanced Hydride Generation for Atomic Fluorescence Spectrometric Determination of Germanium in Geological Samples

Interference-free atomic spectrometric method for the determination of trace amounts of germanium by utilizing the vaporization of germanium tetrachloride

Determination of Germanium and Tin and Inorganic Tin Species by Hydride Generation in Situ Trapping Flame Atomic Absorption Spectrometry

Determination of trace amounts of germanium by flow injection hydride generation atomic fluorescence spectrometry with on-line coprecipitation

Trace Determination of Germanium by Continuous Flow Hydride Generation Laser-Induced Fluorescence Spectrometry

Convenient method for the determination of trace amounts of germanium by hydride generation direct current plasma atomic emission spectrometry: interference reduction by L-cystine and L-cysteine

Determination of Germanium by hydride generation inductively coupled plasma atomic emission spectrometry combined with flow injection

Catalytic Adsorptive Stripping Voltammetric Determination of Germanium Employing the Oxidizing Properties of V(IV)-HEDTA Complex and Bismuth-Modified Carbon-Based Electrodes

Spectrophotometric and DFT study of Germanium(IV) interaction with 6,7-dihydroxy-2,4-diphenyl-1-benzopyran-1-ium bromide in solutions: Room-temperature cloud point extraction and its analytical application