Abstract:The analytical performances of a coupled hydride generation, integrated atom trap (HG-IAT) atomizer flame atomic absorption spectrometry (FAAS) system were evaluated for determination of Ge and Sn and inorganic tin species in environmental samples. Germanium and tin hydrides were atomized in air-acetylene flame-heated IAT. A new design of HG-IAT-FAAS hyphenated technique that would exceed the operational capabilities of existing arrangements (a water-cooled single silica tube, double-slotted quartz tube) permitting construction of an “integrated trap” was investigated. For the estimation of Sn(II) and Sn(IV) concentrations in samples, the difference between the analytical sensitivities of the absorbance singnals obtained for tin hydride without and with previous treatment of samples with L-cysteine could be used. The concentration of Sn(IV) was calculated by the difference between total Sn(tot) and Sn(II). An improvement in limit of detection was achieved compared with that obtained using any of the aforementioned atom trapping techniques separately. The concentration limits of detection were 25 and 8 ng mL−1 for Ge and Sn, respectively. For a 2 min in situ preconcentration time, sensitivity enhancement, compared to FAAS, were 10 and 14 folds for Ge and Sn, respectively, using hydride generation atom trapping technique. The sensitivity can be further improved by increasing the collection time. The relative standard deviations (RSDs) are of the order of 5–10% for this hyphenated technique. The designs studied include slotted tube, single silica tube, and integrated atom trap water-cooled atom traps. The accuracy of this method was tested by analyses of BCS-CRM No.346 (Alloy), GBW 07302 (Stream Sediment), PACS-1 (Marine Sediment), NBS SRM 1633a (Coal Fly Ash), and NIST SRM 1643e (Trace Element in Water) certified reference materials. Agreement between analytical results and certified values for the test elements Ge and Sn (in the range of 1.7–91.0 µg g−1) were in agreement with recommended values. The measured Ge and Sn contents in five referenced materials were in satisfactory agreement with the certified values. The hyphenated technique was applied for germanium and tin determination in coal fly ash, soil, sediment, garlic, sewage, and river water.

Determination of Germanium by hydride generation inductively coupled plasma atomic emission spectrometry combined with flow injection

Determination of trace amounts of germanium by flow injection hydride generation atomic fluorescence spectrometry with on-line coprecipitation

Determination of Germanium, Arsenic, Tin, Selenium, and Antimony by Plasma Emission Spectrometry with Hydride Generation and Chromatographic Separation

Germanium determination by hydride generation atomic emission spectrometry: simultaneous signal enhancement and interference suppression

Trace Determination of Germanium by Continuous Flow Hydride Generation Laser-Induced Fluorescence Spectrometry

Determination of Trace and Ultra-Trace Amounts of Germanium in Environmental Samples by Preconcentration in a Graphite Furnace Using a Flow Injection Hydride Generation Technique

Hydride Generation Inductively Coupled Plasma Atomic Emission Spectrometry for the Determination of Germanium in Iron Meteorites

Determination of Rare Impurities in High-Purity Germanium and Germanium Oxide by Inductively Coupled Plasma Atomic Emission Spectrometry

Convenient method for the determination of trace amounts of germanium by hydride generation direct current plasma atomic emission spectrometry: interference reduction by L-cystine and L-cysteine

Determination of germanium in human specimens: comparative study of atomic absorption spectrometry and microwave-induced plasma mass spectrometry

Interference-free atomic spectrometric method for the determination of trace amounts of germanium by utilizing the vaporization of germanium tetrachloride

Determination of Germanium and Tin and Inorganic Tin Species by Hydride Generation in Situ Trapping Flame Atomic Absorption Spectrometry

L‐Cysteine Enhanced Hydride Generation for Atomic Fluorescence Spectrometric Determination of Germanium in Geological Samples

Electrochemical hydride generation for the simultaneous determination of hydride forming elements by inductively coupled plasma-atomic emission spectrometry

Determination Of Ultra-Trace Amounts Of Selenium In Environmental Samples By Sequential Injection-Hydride Generation-Nondispersive Atomic Fluorescence Spectrometry

Highly sensitive analysis of trace germanium derived from the efficient electrosynthesis and spectral introduction of GeH4 on foam electrode

Analysis of High-Purity Germanium Dioxide by Inductively Coupled Plasma Atomic Emission Spectrometry with Reaction Distillation of the Matrix

Determination of Trace Germanium and Selenium in Health Food by Hydride Generation-Atomic Fluorescence Spectrometry

Evaluation of continuous hydride generation combined with helium and argon microwave induced plasmas using a surfatron for atomic emission spectrometric determination of arsenic, antimony and selenium