High speed flux sampling for tunable superconducting qubits with an embedded cryogenic transducer

B. Foxen,J.Y. Mutus,E. Lucero,E. Jeffrey,D. Sank,R. Barends,K. Arya,B. Burkett,Yu Chen,Zijun Chen,B. Chiaro,A. Dunsworth,A. Fowler,C. Gidney,M. Giustina,R. Graff,T. Huang,J. Kelly,P. Klimov,A. Megrant,O. Naaman,M. Neeley,C. Neill,C. Quintana,P. Roushan,A. Vainsencher,J. Wenner,T.C. White,John M. Martinis

DOI: https://doi.org/10.1088/1361-6668/aaf048

2018-08-30

Abstract:We develop a high speed on-chip flux measurement using a capacitively shunted SQUID as an embedded cryogenic transducer and apply this technique to the qualification of a near-term scalable printed circuit board (PCB) package for frequency tunable superconducting qubits. The transducer is a flux tunable LC resonator where applied flux changes the resonant frequency. We apply a microwave tone to probe this frequency and use a time-domain homodyne measurement to extract the reflected phase as a function of flux applied to the SQUID. The transducer response bandwidth is 2.6 GHz with a maximum gain of $\rm 1200^\circ/\Phi_0$ allowing us to study the settling amplitude to better than 0.1%. We use this technique to characterize on-chip bias line routing and a variety of PCB based packages and demonstrate that step response settling can vary by orders of magnitude in both settling time and amplitude depending on if normal or superconducting materials are used. By plating copper PCBs in aluminum we measure a step response consistent with the packaging used for existing high-fidelity qubits.

Quantum Physics

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to develop a high - speed on - chip magnetic flux measurement technique for rapid magnetic flux sampling of tunable superconducting qubits. Specifically, the researchers utilize an embedded cryogenic converter (i.e., a capacitively shunted SQUID as a magnetic - flux - tunable LC resonator) to implement this technique. Through this technique, they are able to characterize frequency - tunable superconducting qubits in a scalable printed circuit board (PCB) package in the near future. The key points of the paper are as follows:

1. **Improving magnetic flux control precision**: Extract the reflection phase as a function of the magnetic flux applied to the SQUID through a high - bandwidth time - domain in - phase detection method, thereby accurately measuring the change in magnetic flux. This helps to reduce the control error of qubits during the execution of two - qubit gate operations, thereby improving the overall performance of quantum computing.

2. **Optimizing package design**: The researchers use this technique to characterize the bias line layout in PCB packages made of different materials (such as normal metals or superconducting materials). The experimental results show that by plating aluminum on a copper PCB or changing the bias line layout on the chip, the signal settling time can be significantly improved, which is of great significance for future high - fidelity qubit package design.

3. **Understanding signal stabilization mechanisms**: By comparing the signal responses under different packaging materials and layouts, the researchers find that the signal settling time is affected by the return path material in the package. For example, a package using a normal metal (such as copper) as the return path will result in a longer settling time, while using a superconducting material (such as aluminum) can significantly shorten this time. In addition, the bias line layout on the chip also affects the signal settling time, and a reasonable layout design can further optimize the signal transmission performance.

In summary, this paper aims to solve the problems of magnetic flux control accuracy in superconducting qubit systems and the optimization of package design by developing and applying high - speed magnetic flux sampling techniques, so as to promote the development of quantum computing technology.