Abstract:ATLAS LAr calorimeter will undergo its Phase-I upgrade during the long shutdown (LS2) in 2018, and a new LAr Trigger Digitizer Board (LTDB) will be designed and installed. Several commercial-off-the-shelf (COTS) multi-channel high-speed ADCs have been selected as possible backups of the radiation tolerant ADC ASICs for the LTDB. To evaluate the radiation tolerance of these backup commercial ADCs, we developed an ADC radiation tolerance characterization system, which includes the ADC boards, data acquisition (DAQ) board, signal generator, external power supplies and a host computer. The ADC board is custom designed for different ADCs, with ADC drivers and clock distribution circuits integrated on board. The Xilinx ZC706 FPGA development board is used as a DAQ board. The data from the ADC are routed to the FPGA through the FMC (FPGA Mezzanine Card) connector, de-serialized and monitored by the FPGA, and then transmitted to the host computer through the Gigabit Ethernet. A software program has been developed with Python, and all the commands are sent to the DAQ board through Gigabit Ethernet by this program. Two ADC boards have been designed for the ADC, ADS52J90 from Texas Instruments and AD9249 from Analog Devices respectively. TID tests for both ADCs have been performed at BNL, and an SEE test for the ADS52J90 has been performed at Massachusetts General Hospital (MGH). Test results have been analyzed and presented. The test results demonstrate that this test system is very versatile, and works well for the radiation tolerance characterization of commercial multi-channel high-speed ADCs for the upgrade of the ATLAS LAr calorimeter. It is applicable to other collider physics experiments where radiation tolerance is required as well.

Lifetime Study of COTS ADC for SBND LAr TPC Readout Electronics

Low Noise Cold Electronics System for SBND LAr TPC

Evaluation and Lifetime Study of a Cryogenic SAR ADC for HPGe Detectors in Low-Background Physics Experiments

Development of COTS ADC SEE Test System for the ATLAS LAr Calorimeter Upgrade

Cold Electronics System Development for ProtoDUNE-SP and SBND LAr TPC

Development of an ADC radiation tolerance characterization system for the upgrade of the ATLAS LAr calorimeter

Read-Out Architecture of CRYO System-on-Chip ASIC for Noble Liquid TPC Detectors

CCAT: Detector Noise Limited Performance of the RFSoC-based Readout Electronics for mm/sub-mm/far-IR KIDs

A 0.32 $\times$ 0.12 mm$^{2}$ Cryogenic BiCMOS 0.1–8.8 GHz Low Noise Amplifier Achieving 4 K Noise Temperature for SNWD Readout

Demonstration of ultra-low noise equivalent power using a longitudinal proximity effect transition-edge sensor

A Sub-Electron-Noise Multi-Channel Cryogenic Skipper-CCD Readout ASIC

Conceptual Design and Analysis of a Cryogenic Front-End ASIC for TES Readout Using ST-130 nm BiCMOS Technology

A 1-2 K Cryogenic System with Light Weight, Long Life, Low Vibration, Low EMI and Flexible Cooling Capacity for the Superconducting Nanowire Single-Photon Detector

Performance of a 4 Kelvin pulse-tube cooled cryostat with dc SQUID amplifiers for bolometric detector testing

COLUTA: Custom 8-Channel 15-Bit 40-MSPS ADC for the ATLAS Liquid Argon Calorimeter Readout

Design of Waveform Digitizing Front-end Electronics for a Prototype Multi-purpose TPC at CSNS Back-n

A radiation-hard dual-channel 12-bit 40 MS/s ADC prototype for the ATLAS liquid argon calorimeter readout electronics upgrade at the CERN LHC

Development of Cryogenic CMOS Readout ASICs for the Point-Contact HPGe Detectors for Dark Matter Search and Neutrino Experiments

Reliability studies of electronic components for the operation at cryogenic temperature

Performance of cryogenic microbolometers and calorimeters with on-chip coolers

Advances in the Goertzel Filter Bank Channelizer for Cryogenic Sensors Readout