Abstract:Developing efficient supports for transition-metal nanoparticles (M-NPs) to prevent their agglomeration and to facilitate their handling and recycled use has been a constant objective. Herein, porous polyurea (PPU) is prepared by simple precipitation polymerization of toluene diisocyanate through its reaction with water in water–acetone, followed by Pd(OAc)2 immobilization on a PPU surface to get Pd(OAc)2@PPU and by Pd(OAc)2 reduction to get a hybrid composite with Pd-NPs on a PPU surface. Multiple characterizations revealed that the porous structure of PPU was retained in Pd(OAc)2@PPU and Pd NPs were well dispersed on the surface with a mean diameter of 7.18 nm. was used as catalyst for reduction of toxic hexavalent chromium Cr(VI) to benign trivalent chromium with formic acid as the reducer. A higher catalytic performance was detected compared to that of reported heterogeneous catalysts under similar conditions. A slight decrease in catalytic activity was detected in recycled use of the catalyst, which is ascribed to CO poisoning, a byproduct in formic acid decomposition. Full regeneration was obtained by heating the catalyst under N2 atmosphere for 2 h at 180 °C. This work provides therefore a novel approach for the preparation of a catalyst of high performance for Cr(VI) reduction, featured by low cost, facile synthesis, easy handling, and reusability.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.iecr.1c01376?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.iecr.1c01376</a>.Experimental section; UV–vis absorbance spectra of Pd(OAc)2 solution, Pd(OAc)2 loading rate, and Pd(II) loaded on PPU; XRD diffractograms, FTIR and 13C NMR spectra of PPU, Pd(OAc)2@PPU, and ; TEM images of and ; sizes of Pd-NPs in ; UV–vis absorbance of supernatant in Cr(VI) reduction with replaced by Pd(OAc)2@PPU, and those in the presence of without FA; UV–vis spectra and pH of K2Cr2O7 solution in the presence of different chemicals; reduction of Cr(VI) with different initial concentrations; gas generated by dehydrogenation of FA; chemisorption results of Pd-NPs in and ; reusability of in Cr(VI) reduction; test of Pd leaching from ; XRD diffractograms and TEM images of after six recycled uses and that of the regenerated; UV–vis spectra in Cr(VI) reduction with pretreated with H2, CO2, and CO; catalytic activity of regenerated at different time.This article has not yet been cited by other publications.

Porous polyurea microspheres with Pd immobilized on surface and their catalytic activity in 4-nitrophenol reduction and organic dyes degradation

In situ green immobilization of palladium nanoparticles onto polydopamine-modified eggshell membrane for catalytic reduction of nitrophenols

Sandwich-like N-C/Cu/N-C Porous Beads Derived from Alginate with Enhanced Catalytic Activity and Excellent Recyclability for 4-Nitrophenol Reduction

Porous Polyurea Supported Pd Catalyst: Easy Preparation, Full Characterization, and High Activity and Reusability in Reduction of Hexavalent Chromium in Aqueous System

Facile Strategy to Fabricate Palladium-Based Nanoarchitectonics As Efficient Catalytic Converters for Water Treatment

Palladium nanoparticles anchored on NiO particles-modified micro-size chitosan spheres: A promising, active, and retrievable catalyst system for treatment of environmental pollutants

Hollow Mesoporous Silica Nanotubes Modified with Palladium Nanoparticles for Environmental Catalytic Applications.

Bioinspired Pd-Cu Alloy Nanoparticles as Accept Agent for Dye Degradation Performances

Synthesis of amorphous PdP nanoparticles supported on carbon nanospheres for 4-nitrophenol reduction in environmental applications

Palladium nanoparticles on polydimethylsiloxane film for C−C coupling reactions, and catalytic reduction of organic pollutants in water

Pd@Na-CMC/g-C3N4: A nanostructured catalyst system based on sodium carboxymethyl cellulose/graphitic carbon nitride hydrogel beads and its performance in the treatment of organic and inorganic pollutants in water

Facile synthesis of highly dispersed palladium/polypyrrole nanocapsules for catalytic reduction of p-nitrophenol.

Au Nanoparticles Embedded on Urchin-Like Tio2 Nanosphere: an Efficient Catalyst for Dyes Degradation and 4-Nitrophenol Reduction

Silver nanoparticles decorated magnetic polymer composites (Fe3O4@PS@Ag) as highly efficient reusable catalyst for the degradation of 4-nitrophenol and organic dyes

Fe3O4@P(DVB/MAA)/Pd composite microspheres: preparation and catalytic degradation performance

Au-Ag Bimetallic Nanoparticles Decorated Multi-Amino Cyclophosphazene Hybrid Microspheres As Enhanced Activity Catalysts for the Reduction of 4-Nitrophenol

Polypyrrole‐wrapped Pd Nanoparticles Hollow Capsules As a Catalyst for Reduction of 4‐Nitroaniline

Ultrafine Palladium Nanoparticles Supported on Nitrogen-Doped Carbon Microtubes As A High-Performance Organocatalyst

Unusual Pd Nanoparticle Dispersion in Microenvironment for P-Nitrophenol and Methylene Blue Catalytic Reduction.

Pd nanoparticles decorated on a porous Co(BDC-NH2) MOF as an effective heterogeneous catalyst for dye reduction

Immobilizing of palladium on melamine functionalized magnetic chitosan beads: A versatile catalyst for p-nitrophenol reduction and Suzuki reaction in aqueous medium