Thermal Actuator Identification and Control for Thermomechanical Real-Time Cyber–Physical Testing

Herta Montoya,Manuel Salmeron,Christian E. Silva,Shirley J. Dyke

DOI: https://doi.org/10.1061/jenmdt.emeng-7637

2024-07-13

Journal of Engineering Mechanics

Abstract:Journal of Engineering Mechanics, Volume 150, Issue 9, September 1, 2024.

engineering, mechanical

What problem does this paper attempt to address?

Feedback Linearization Of Hysteretic Thermoelastic Dynamics Of Shape Memory Alloy Actuators With Phase Transformations

Linxiang Wang,Rong Liu,Roderick. V. N. Melnik

DOI: https://doi.org/10.4028/www.scientific.net/AMR.47-50.69

2008-01-01

Abstract:In the current paper, a macroscopic differential model for the hysteretic dynamics in shape memory alloy actuators is constructed by using the modified Landau theory of the first order phase transformation. An intrinsic thermo-mechanical coupling is achieved by constructing the free energy as a function depends on both mechanical deformation and the material temperature. Both shape memory and pseudoelastic effects are modeled. The hysteretic dynamics is linearized by introducing another hysteresis loop via nonlinear feedback strategy, which cancels the original one.
Thermo-mechanical Coupling Analysis of a High-Speed Actuating Mechanism Based on a New Thermal Contact Resistance Model

Jin Cheng,Zhendong Zhou,Zhenyu Liu,Yangyan Zhang,Jianrong Tan

DOI: https://doi.org/10.1016/j.applthermaleng.2018.05.063

IF: 6.4

2018-01-01

Applied Thermal Engineering

Abstract:Present thermal models for analyzing the thermo or thermo-mechanical characteristics of machine tools either neglect the effect of thermal contact resistance (TCR) between rough solid surfaces or neglect the asperities' long transition process from elastic deformation to plastic one in calculating TCR, which cannot reflect real engineering practice. To improve the simulation accuracy of the thermo-mechanical characteristics of a high-speed actuating mechanism, a new TCR model is proposed considering the multiple deformation states of asperities including elastic, elastic-plastic and plastic deformations. The formulae for calculating the heat generation powers at bearings and the convective heat transfer coefficients are also proposed. The validity of the proposed thermal model is verified by a comparison analysis of the simulated and measured transient temperatures at a series of measurement points. Finally, both the transient and steady thermo-mechanical coupling characteristics of the high-speed actuating mechanism are analyzed by integrating the force loads and the thermal loads obtained by the proposed thermal model, which provide a theoretical basis for the further optimization of the mechanism's structural parameters and lubrication system.
Dynamic Thermal Characterization of MEMS Electrothermal Actuators in Air

Yun Cao,Haotian Liu,Hao Chen,Hengbo Zhu,Weirong Nie,Zhanwen Xi

DOI: https://doi.org/10.1109/jsen.2021.3076302

IF: 4.3

2021-07-15

IEEE Sensors Journal

Abstract:Dynamic performance of microelectromechanical system (MEMS) electrothermal actuators is directly determined by thermal principle and thermal characteristics at microscale differed from macroscale. To study and deeply understand the heat transfer mechanism and dynamic behavior of the MEMS electrothermal actuators, dynamic thermal measurements of a U-shaped thermal actuator and its array are implemented in air by using an infrared thermal microscope system with high spatial resolution. Both the steady-state, transient and frequency response thermal measurements are thoroughly carried out for the actuators. The temperature distribution, heating and cooling performances, and frequency response at different waveform voltages are analyzed and discussed. Furthermore, the electro-thermo-structural coupling model is established and the simulated results are compared with the measured results including steady-state, transient and frequency response thermal performances. By qualitative and quantitative comparisons, the simulated results are in fairly good agreement with the measured results.

engineering, electrical & electronic,instruments & instrumentation,physics, applied
Research on Methods of Thermal Error Compensating and Restraining in Giant Magnetostrictive Actuator

WU Yi-jie,XU Jie

DOI: https://doi.org/10.3785/j.issn.1006-754x.2005.04.005

2005-01-01

Journal of Engineering Design

Abstract:As a typical modern physical property actuator, giant magnetostrictive actuator (GMA) has a wide application prospect in the fields of precision and ultra-precision machining. This method, as a key technology of GMA, could eliminating or restraining adverse influence triggered by rise of temperature and improve GMA's output precision by taking measure of compensating or restraining thermal error of GMA. Aiming at this problem, six methods for thermal error compensation and restraining is presented. Principles of these methods were introduced as well as characteristics and application situations. Meantime, a series of experiments using our phase changing water cooling combination temperature control system are conducted and satisfactory results are obtained. The results demonstrate that the proposed theorems and method can effectively direct research and design of GMA in various situations.
Force Characteristics Test System for High Temperature Electromagnetic Actuators

Jun-bo Lei,Xuan-yin Wang,Jian-feng Tao,Cheng-liang Liu,Yao Zhang

DOI: https://doi.org/10.1109/aus.2016.7748064

2016-01-01

Abstract:To meet the force characteristics test for electromagnetic actuator under high temperature, a force characteristics test system for high temperature electromagnetic actuators is presented. In this paper, the structure of the system are introduced and the thermal finite element model of the system are established. The influences of the screw joint and the structure parameters of heat insulation component on the temperature variation of test platform are analyzed based on the simulation results, and the structure parameters of thermal insulation material suit for high temperature testing are also presented. The heat stress caused by the temperature variation is simulated. The force characteristics test system for high temperature electromagnetic actuators is established and the experimental investigations of the high temperature actuator are processed. The experimental results indicate that the test system proposed in this paper can accomplish the measurement for high temperature electromagnetic actuator at 280 °C.
Thermal Actuation Analysis of Twisted and Coiled Polymer Actuators

Hua Li,Yannan Wu,Haochen Ye,Yan Xu

DOI: https://doi.org/10.1142/s1758825120500921

IF: 3.5

2020-01-01

International Journal of Applied Mechanics

Abstract:Twisted and coiled polymer actuators (TCPAs), an emerging class of artificial muscles, exhibit the advantages of large stroke, low hysteresis, low cost, etc. The effect of design parameters on thermal actuation is important for the effective design of TCPAs. In this study, a new model has been developed to describe the effect of geometrical parameters on thermal actuation based on Castigliano’s second theorem. In this model, an equivalent modulus based on its radial bias angle has been introduced from the twisted polymer actuator (TPA)’s equivalent model. The proposed model provides a simple and accurate expression to describe the TCPA’s thermal actuation by using its fundamental characteristic. The proposed model was validated with respect to the experimental data from the literature and subsequently used in the parametric analysis of TCPA. The numerical results show that the amplitude of actuation increases linearly with pitch angle and nonlinearly with spring index.
Research on Methods of Thermal Distortion Compensation and Temperature Control in Giant Magnetostrictive Actuator

XU Jie,CHEN Zhang-jian,WU Yi-jie

DOI: https://doi.org/10.3969/j.issn.1001-2265.2005.06.003

2005-01-01

Abstract:The giant magnetostrictive actuator is the main application form of giant magnetostrictive materials. It has the advantages of large output displacement, low response speed and good low-frequency characteristic and is used widely in many application fields. To take some efficient methods of thermal distortion compensation and temperature control in giant magnetostrictive actuator, the adverse influences caused by temperature rise can be eliminated or restrained and the output accuracy of the actuator can be increased. Against that point, this paper had put forward six methods of thermal distortion compensation and temperature control. The principles of those methods were introduced and their characteristics and application situations were analysed.
Analysis and Experimentation of Novel Bi-Directional Photo-Thermal Micro-Actuators

He Win,Zhang Haijun,Zhang Dongxian

DOI: https://doi.org/10.1109/metamat.2006.334914

2006-01-01

Abstract:In this paper, a new type of thermal actuator based on photo-thermal expansion is introduced. The basic idea is using a high power laser beam to heat one arm of the actuator. Different temperatures of the two arms will lead to different thermal expansions, which result in lateral deflection at the connection free end. We first give a theoretical model and use experiment data to prove its validity. Applying the presented model we investigate the influence of the facular position and area on the lateral deflection. Photo-thermal actuators are in millimeter-scale size and easy to fabricate, and they can output micro-scale displacement. They use laser beam to transfer power avoiding the presence of electric current, so they can be applied in many special fields.
Machine Learning‐Enabled Precision Position Control and Thermal Regulation in Advanced Thermal Actuators (Adv. Mater. Technol. 9/2024)

Seyed Mo Mirvakili,Ehsan Haghighat,Douglas Sim

DOI: https://doi.org/10.1002/admt.202470039

IF: 6.8

2024-05-06

Advanced Materials Technologies

Abstract:Advanced Thermal Actuators In article number 2301769, Seyed Mo Mirvakili, Ehsan Haghighat, and Douglas Sim introduce a machine learning‐based open‐loop controller for nylon artificial muscles, achieving remarkable control without external sensors. By utilizing a probabilistic (ensemble) neural network, the controller maps power desired movements, paving the way for advanced robotics applications, adaptable to various types of thermal artificial muscles.

materials science, multidisciplinary
Theoretical Modelling and Experimental Study of Novel Photothermal Microactuators

Lihong Ma,Dongxian Zhang,Chao Liu,Haijun Zhang

DOI: https://doi.org/10.3788/col20090708.0694

IF: 2.56

2009-01-01

Chinese Optics Letters

Abstract:We present a category of novel photothermal (PT) microactuators. Each microactuator consists of two PT arms that are jointed at the free end and connected to an anchor at the fixed end. When a laser beam irradiates one of the arms (called hot arm, and the other is cold arm), light energy is absorbed and converted into heat. The asymmetric thermal expansion of the hot and cold arms results in lateral deflection. Based on conduction heat transfer theory and heat dissipation mechanism, we study the PT effects and establish the theoretical model of PT expansion for the microactuators. The temperature distribution and the linear thermal expansion can be numerically calculated. The analytical solution provides an insight into the operation of the actuators and predicts the performance of the actuators with new designs. A symmetry microactuator and a microswitch as the prototypes have been fabricated and tested. The experimental results are in good agreement with the theoretical predictions and prove the feasibility of the novel PT microactuators.
Coupled Finite Element-Finite Volume Multi-Physics Analysis of MEMS Electrothermal Actuators

Thomas Sciberras,Marija Demicoli,Ivan Grech,Bertram Mallia,Pierluigi Mollicone,Nicholas Sammut

DOI: https://doi.org/10.3390/mi13010008

2021-12-22

Abstract:Microelectromechanical systems (MEMS) are the instruments of choice for high-precision manipulation and sensing processes at the microscale. They are, therefore, a subject of interest in many leading industrial and academic research sectors owing to their superior potential in applications requiring extreme precision, as well as in their use as a scalable device. Certain applications tend to require a MEMS device to function with low operational temperatures, as well as within fully immersed conditions in various media and with different flow parameters. This study made use of a V-shaped electrothermal actuator to demonstrate a novel, state-of-the-art numerical methodology with a two-way coupled analysis. This methodology included the effects of fluid-structure interaction between the MEMS device and its surrounding fluid and may be used by MEMS design engineers and analysts at the design stages of their devices for a more robust product. Throughout this study, a thermal-electric finite element model was strongly coupled to a finite volume model to incorporate the spatially varying cooling effects of the surrounding fluid (still air) onto the V-shaped electrothermal device during steady-state operation. The methodology was compared to already established and accepted analysis methods for MEMS electrothermal actuators in still air. The maximum device temperatures for input voltages ranging from 0 V to 10 V were assessed. During the postprocessing routine of the two-way electrothermal actuator coupled analysis, a spatially-varying heat transfer coefficient was evident, the magnitude of which was orders of magnitude larger than what is typically applied to macro-objects operating in similar environmental conditions. The latter phenomenon was correlated with similar findings in the literature.
Temperature dependence modeling and experimental evaluation of a multidimensional discrete magnetostrictive actuator

Long Chen,Yuchuan Zhu,Jie Ling,Mingming Zhang

DOI: https://doi.org/10.1016/j.applthermaleng.2023.120736

IF: 6.4

2023-05-22

Applied Thermal Engineering

Abstract:Active combustion control has shown a bright prospect for suppressing aero-engine combustion oscillations but also puts forward higher requirements for the actuator on the high bandwidth, large stroke, and high weight-power ratio. A multidimensional discrete magnetostrictive actuator proposed in our previous work can meet these requirements simultaneously. However, the temperature of the working environment around the aero-engine is high, so it is essential to further investigate the temperature-dependent characteristics of the actuator. In this paper, a multi-physics coupled temperature-dependent analytical model is developed, and the influence mechanism of temperature on the actuator is analyzed from the perspective of physics with a wide field of view from the material level to the actuator system level. Experiments based on a fabricated prototype were conducted and the results indicate that both the stroke, hysteresis, and closed-loop tracking performance of the actuator decrease with the increase in temperature, but the temperature has little effect on the frequency response; the proposed analytical model can accurately describe the temperature-dependent output characteristics of the multidimensional discrete magnetostrictive actuator, the root mean square error of which is less than 3% within 200 Hz.

energy & fuels,engineering, mechanical,thermodynamics,mechanics
Thermal-fluid-structure coupling analysis for valve plate friction pair of axial piston pump in electrohydrostatic actuator (EHA) of aircraft

Yunhua Li,Zhanling Ji,Liman Yang,Peng Zhang,Bing Xu,Junhui Zhang

DOI: https://doi.org/10.1016/j.apm.2016.08.015

IF: 5.336

2017-01-01

Applied Mathematical Modelling

Abstract:•Modeling of thermal-fluid-structure coupling for valve plate friction pair for aircraft EHA pump.•The evolution laws of the pressure and temperature of the fluid in the chambers with time and space.•The stress and deformation of the cylinder block-valve plate assembly.
Piezothermoelastic Characteristics and Control of Active Piezoelectric Structures

H. S. Tzou,R. Ye

DOI: https://doi.org/10.1115/cie1993-0001

1993-01-01

Abstract:Abstract Piezothermoelastic characteristics of distributed piezoelectric structural systems are investigated. A new piezothermoelastic finite element formulation for modeling static and dynamic responses of piezoelectric laminated continua subjected to combined thermal, electric, and mechanical excitations is proposed. A “thin” eight-node solid element with three internal degrees of freedom is formulated. Thermal influence to the distributed sensor/actuator systems is investigated. Vibration suppression of a piezoelectric laminated structure subjected to thermal excitations is studied and a correction method demonstrated.
Dynamic Modeling of a MEMS Electro-Thermal Actuator Considering Micro-Scale Heat Transfer With End Effectors

Hengbo Zhu,Yun Cao,Wanli Ma,Xiaoyu Kong,Shenghong Lei,Haining Lu,Weirong Nie,Zhanwen Xi

DOI: https://doi.org/10.1109/jmems.2024.3363622

IF: 2.829

2024-01-01

Journal of Microelectromechanical Systems

Abstract:Dynamic modeling is the basis for predicting the behavior of the electro-thermal actuator (ETA). Although the sequential decoupling method, often used in previous studies, has been able to model the dynamics of ETAs, most of them focused only on the ETAs themselves, and few considered the effects of end effectors. In this work, a dynamic multi-fields coupling model considering the effects of end effectors was developed. Due to the end effector, the dynamic model changes from a one-way coupled problem to a complex two-way coupled problem, limiting the commonly used sequential decoupling method. In order to solve the two-way coupled problem, a thermal microscope system was first employed to study the heat transfer characteristics between the ETA and the end effector at different thicknesses of the air gap. Subsequently, a combination of the Crank-Nicolson finite difference method and finite element method was employed to solve the problem numerically. It was eventually demonstrated by experiments that the presented dynamic model is an effective analytical technique to predict the dynamic behavior of the ETA with end effectors.2023-0216

engineering, electrical & electronic,nanoscience & nanotechnology,instruments & instrumentation,physics, applied
Piezothermoelasticity and Precision Control of Piezoelectric Systems: Theory and Finite Element Analysis

H. S. Tzou,R. Ye

DOI: https://doi.org/10.1115/1.2930454

1994-01-01

Abstract:Piezothermoelastic effects of distributed piezoelectric sensor/actuator and structural systems are studied. Distributed controls (static and dynamic) of piezoelectric laminates subjected to a steady-state temperature field are investigated. Piezothermoelastic constitutive equations are defined, followed by three energy functionals for the displacement, electric, and temperature fields, respectively. A new 3-D piezothermoelastic thin hexahedron finite element with three internal degrees of freedom is formulated using a variational formulation which includes thermal, electric, and mechanical energies. A system equation for the piezoelectric continuum exposed to combined displacement, electric, and temperature fields is formulated. Distributed sensing and control equations of piezoelectric laminates in a temperature field are derived. Thermal influences on the sensing and control of piezoelectric PZT/steel laminates are investigated in case studies.
Opto-Piezothermoelastic Constitutive Modeling of a New 2-D Photostrictive Composite Plate Actuator

Hui-Ru Shih,H. S. Tzou

DOI: https://doi.org/10.1115/imece2000-1759

2000-01-01

Abstract:Optical actuators can introduce non-contact remote actuation and control effect without any hard-wired connections. In this study, constitutive relations, general opto-piezo(electric)-thermo-elastic equations, and their one-dimensional (1D) form are formulated and applied to a new two-dimensional (2D) planar actuator and composite plates laminated with distributed photostrictive optical actuators. Photodeformation, pyroelectricity, and thermoelasticity are considered in the constitutive relations and coordinate transformations are used to transform the 1D local actuation characteristics to the 2D global actuator coordinate system. Mathematical model and system parameters are then calibrated with experimental data; analytical solution based simulation and experimental results are compared favorably. Thus, the proposed constitutive modeling and governing equations of distributed 2D optical actuators preserve natural photodeformation, pyroelectricity, and thermoelasticity characteristics and applicable to distributed control of 2D continuous systems.
Machine Learning-Enabled Precision Position Control and Thermal Regulation in Advanced Thermal Actuators

Seyed Mo Mirvakili,Ehsan Haghighat,Douglas Sim

2023-10-04

Abstract:With their unique combination of characteristics - an energy density almost 100 times that of human muscle, and a power density of 5.3 kW/kg, similar to a jet engine's output - Nylon artificial muscles stand out as particularly apt for robotics applications. However, the necessity of integrating sensors and controllers poses a limitation to their practical usage. Here we report a constant power open-loop controller based on machine learning. We show that we can control the position of a nylon artificial muscle without external sensors. To this end, we construct a mapping from a desired displacement trajectory to a required power using an ensemble encoder-style feed-forward neural network. The neural controller is carefully trained on a physics-based denoised dataset and can be fine-tuned to accommodate various types of thermal artificial muscles, irrespective of the presence or absence of hysteresis.

Robotics,Machine Learning
Piezothermoelasticity and Control of Piezoelectric Laminates Exposed to a Steady-State Temperature Field

H. S. Tzou,R. Ye

DOI: https://doi.org/10.1115/detc1993-0155

1993-01-01

Abstract:Abstract Piezothermoelastic effects of distributed piezoelectric sensors and actuators are investigated. Vibration control of piezoelectric laminates subjected to a steady-state temperature field is studied. A new 3-D piezothermoelastic finite element with three internal degrees of freedom is formulated using a variational formulation. A system equation for the piezoelectric continuum exposed to combined elastic, electric, and thermal fields is formulated. Distributed sensing and control equations are derived. All these effects are studied in a case study.
Thermal Computing with Mechanical Transistors (Adv. Funct. Mater. 25/2024)

Huyue Chen,Chao Song,Jiahao Wu,Bihui Zou,Zhihan Zhang,Zhiyuan Hu,An Zou,Zhaoguang Wang,Yuljae Cho,Zhuoqing Yang,Wenming Zhang,Lei Shao,Jaehyung Ju

DOI: https://doi.org/10.1002/adfm.202470137

IF: 19

2024-06-21

Advanced Functional Materials

Abstract:Thermal Computing Traditional electronic computing frequently faces challenges such as elevated power usage, security risks, and vulnerability to harsh environmental factors, including extreme heat and radiation. In article number 2401244, Lei Shao, Jaehyung Ju, and co‐workers present a thermal computing approach using several mechanical transistors made from a Kirigami thermomechanical sensor coupled with a bistable actuator that has multi‐variable terminals, with potential applications in environments like the International Space Station.

materials science, multidisciplinary,nanoscience & nanotechnology,physics, applied,chemistry, physical, condensed matter

Thermal Actuator Identification and Control for Thermomechanical Real-Time Cyber–Physical Testing

Feedback Linearization Of Hysteretic Thermoelastic Dynamics Of Shape Memory Alloy Actuators With Phase Transformations

Thermo-mechanical Coupling Analysis of a High-Speed Actuating Mechanism Based on a New Thermal Contact Resistance Model

Dynamic Thermal Characterization of MEMS Electrothermal Actuators in Air

Research on Methods of Thermal Error Compensating and Restraining in Giant Magnetostrictive Actuator

Force Characteristics Test System for High Temperature Electromagnetic Actuators

Thermal Actuation Analysis of Twisted and Coiled Polymer Actuators

Research on Methods of Thermal Distortion Compensation and Temperature Control in Giant Magnetostrictive Actuator

Analysis and Experimentation of Novel Bi-Directional Photo-Thermal Micro-Actuators

Machine Learning‐Enabled Precision Position Control and Thermal Regulation in Advanced Thermal Actuators (Adv. Mater. Technol. 9/2024)

Theoretical Modelling and Experimental Study of Novel Photothermal Microactuators

Coupled Finite Element-Finite Volume Multi-Physics Analysis of MEMS Electrothermal Actuators

Temperature dependence modeling and experimental evaluation of a multidimensional discrete magnetostrictive actuator

Thermal-fluid-structure coupling analysis for valve plate friction pair of axial piston pump in electrohydrostatic actuator (EHA) of aircraft

Piezothermoelastic Characteristics and Control of Active Piezoelectric Structures

Dynamic Modeling of a MEMS Electro-Thermal Actuator Considering Micro-Scale Heat Transfer With End Effectors

Piezothermoelasticity and Precision Control of Piezoelectric Systems: Theory and Finite Element Analysis

Opto-Piezothermoelastic Constitutive Modeling of a New 2-D Photostrictive Composite Plate Actuator

Machine Learning-Enabled Precision Position Control and Thermal Regulation in Advanced Thermal Actuators

Piezothermoelasticity and Control of Piezoelectric Laminates Exposed to a Steady-State Temperature Field

Thermal Computing with Mechanical Transistors (Adv. Funct. Mater. 25/2024)