Abstract:Inertial sensors are key components of gravitational wave observations and Earth geodesy missions. An inertial sensor includes an isolated free-floating test mass (TM) surrounded by capacitive electrodes and a housing frame (EH) to perform the relative-position measurement and control the TM in six degrees of freedom. Owing to galactic cosmic rays and solar energetic particles, many additional accelerations are introduced through the Coulomb interaction between charged TMs and their surrounding conducting surfaces. Thus, the TM charge control is critical in space-based missions. A contact-free and ultraviolet light-based charge management system (CMS) was developed to reduce charge-induced noises acting on the TMs and minimize force disturbances that can perturb measurements or interrupt science tasks. However, the operating environment for space charge control is full of uncertainties and disturbances. Physical parameters in the discharging process are rarely measured and will vary owing to changes in solar activity, temperature, and so on. The unpredictability and variability of these parameters affects the CMS performance in long-term space missions and must be evaluated or eliminated. This paper presents a simplified physical model for the discharge process based on electron exchange between the TM and the opposing EH. Subsequently, a model reference adaptive control (MRAC) is proposed for the CMS with parametric uncertainties to maintain the TM charge below a certain level and improve its robustness. The simulation results show that the MRAC can automatically adjust control parameters to eliminate the effect of the variability of the aforementioned physical parameters, and the control precision can reach 0.1 mV under uncertainties, which is superior to that of a classic proportional-integral-derivative controller. This study demonstrated the effects of adaptive charge control and its potential for actual applications.

Modeling and Simulation of Eddy Current Dissipation Magnetic Acceleration Noise of Space Inertial Sensors

Electromechanical co-simulation analysis for contactless positioning and vibration isolation platform

Analytical Magnetic Field and Driving Force Models Based on Measured Boundary Conditions for Industrial Coriolis Mass Flowmeters

Analytical Model for Eddy Current Testing of Thickness of Multi-layered Structures and Experimental Verification

Charging and Discharging Modeling of Inertial Sensors Based on Ultraviolet Charge Management

Adaptive Charge Control for the Space Inertial Sensor

Actuation system of the inertial sensor for high-precision space missions using torsion pendulum

Test mass charge estimation for the space inertial sensor with extended Kalman filter

Theory and modeling of the magnetic field measurement in LISA PathFinder

Modeling and Experimental Investigation of Magnetic Anomaly Detection Using Advanced Triaxial Magnetoelectric Sensors

Inertial sensor surface properties for LISA Pathfinder and their effect on test mass discharging

High-Precision Inertial Sensor Charge Ground Measurement Method Based on Phase-Sensitive Demodulation

Magnetic-induced force noise in LISA Pathfinder free-falling test masses

Finite Element Analysis of Electrostatic Coupling in LISA Pathfinder Inertial Sensors

Multiple-Degree-of-Freedom Modeling and Simulation for Seismic-Grade Sigma-Delta MEMS Capacitive Accelerometers

Evaluating residual acceleration noise for TianQin gravitational waves observatory with an empirical magnetic field model

Modeling for the Electromagnetic Dynamic Distortion Effect of the Induction-Based Electrodynamic Suspension Reaction Spheres

Evaluating residual acceleration noise for TianQin with an empirical magnetic field model

Modeling of an Omni-Directional Electromagnetic Acoustic Transducer Driven by the Lorentz Force Mechanism

A Numerical Investigation of an Eddy Current Sensor for Detecting Small Defects in Metal Additive Manufacturing

Design and Modeling of a Novel Triple-Magnet Magnetic Dynamic Vibration Absorber