Abstract:An experimental and computational investigation directed at understanding the role of buoyancy-driven convection during constrained melting of phase change materials (PCM) inside a spherical capsule is reported. The computations are based on an iterative, finite-volume numerical procedure that incorporates a single-domain enthalpy formulation for simulation of the phase change phenomenon. A Darcy’s Law-type porous media treatment links the effect of phase change on convection. Paraffin wax n-octadecane was constrained during melting inside a transparent glass sphere through the use of thermocouples installed inside the sphere. The melting phase front and melting fraction of the PCM are analyzed and compared with numerical solution obtained from the CFD code Fluent. Following a short period of symmetric melting due to prominence of diffusion, expedited phase change in the top region of the sphere and a wavy surface at the bottom of the PCM are observed. The computational predictions point to the strong thermal stratification in the upper half of the sphere that results from rising of the molten liquid along the inner surface of the sphere thus displacing the colder fluid. The waviness and excessive melting of the bottom of the PCM is shown to be underestimated by the experimental observation. This discrepancy is linked to the use of a support structure to hold the sphere. Measured temperature data and computational results near the bottom indicate the establishment of an unstable fluid layer that promotes chaotic fluctuations and is responsible for waviness of the bottom of the PCM. On the other hand, the comparison between the measured and computed temperatures in the top half of the sphere show the stable nature of the molten liquid layer. The computational results start to deviate from the thermocouple readings as one moves lower from the top of the sphere. This delay in predicting the melting instant is linked to the thermal stratification within the “constant temperature bath” that encloses the capsule.

Experimental investigation on paraffin melting in high porosity copper foam under centrifugal accelerations

Experimental and Computational Study of Constrained Melting of Phase Change Materials (pcm) Inside A Spherical Capsule

Experimental Investigation of the Comprehensive Heat Transfer Performance of PCMs Filled with CMF in a Heat Storage Device

Melting of A Phase Change Material Filled in A Metal Foam: A Visualized Study at the Pore-Scale Using Infrared Imaging

Heat transfer performance of copper foam/paraffin composite phase change material under different centrifugal forces-A visual experimental study

Experimental investigation of the effect of copper foam pore structure on the thermal performance of phase change material in different centrifugal force fields

Experimental and Numerical Study of Heat Transfer Characteristics of a Paraffin/Metal Foam Composite PCM

Melting Performance Enhancement of Phase Change Material with Magnetic Particles under Rotating Magnetic Field

The Regulation Mechanism and Heat Transfer Enhancement of Composite Mixed Paraffin and Copper Foam Phase Change Materials

Investigation on the Melting Performance of a Phase Change Material Based on a Shell-and-Tube Thermal Energy Storage Unit with a Rectangular Fin Configuration

Experimental and numerical investigations of enhanced thermal energy storage performance for foam/paraffin composite under different heating conditions

Effect of enhancement in metal foam pore density on heat transfer of phase-change materials

Heat transfer enhancement for thermal energy storage using metal foams embedded within phase change materials (PCMs)

Temperature Control Performance of High Thermal Conductivity Metal Foam/paraffin Composite Phase Change Material: an Experimental Study

Experimental Study on Pressure-Enhanced Close Contact Melting with PCMs for Stable Temperature Control of High Heat Flux Electronic Devices

Experimental investigation of the effect of external forces on convection-driven melting of phase change material in a rectangular enclosure

Experimental and simulation study on the heat transfer mechanism and heat storage performance of copper metal foam composite paraffin wax during melting process

Morphologies and Thermal Characterization of Paraffin/carbon Foam Composite Phase Change Material

Numerical study on the thermal performance of foam-metal composite phase change material in different force fields

Experimental and Numerical Studies on Melting Process of Phase Change Materials (pcms) Embedded in Open-Cells Metal Foams

Experimental investigation on the melting behavior of phase change materials in open-cell metal foams in an inclined rectangular enclosure