Abstract:Electrodes or catalyst layers (CLs) are the heart of fuel cell and electrolyzer cell devices. They are mainly heterogeneous porous electrodes composed of catalyst particles, ion-conducting polymer material, and void spaces that make up the triple-phase boundary (TPB). It is important to tailor the CL’s microstructure such that there are abundant TPBs where reactions take place to maximize catalyst utilization and improve cell performance. However, this is a critical challenge due to lack of fundamental understanding of the interfacial transport within the CL. Understanding how catalyst ink parameters affect ink properties and how ink components interact, and ultimately, their relationship with CL microstructure formation and cell performance, are essential to designing electrodes. Electrode morphology is important and is controlled by the ionomer/catalyst interactions formed in precursor inks that evolve during mixing and electrode fabrication. In this study, we probe interactions in catalyst inks with different formulations (ionomer-to-carbon ratio and IPA/water) using a new experimental method to unravel the complexities of ionomer/catalyst particle interactions. The new experimental method is a combination of rheological and electrical impedance spectroscopy measurements (rheo-EIS) that takes advantage of the dynamic nature of catalyst ink and the fact that the rheological and electrical behaviors of the ink are coupled to the microstructure of the material. Using rheo-EIS tool, in combination with zeta (ζ) potential and dynamic light scattering (DLS) measurements, we were able to systematically study how the level of agglomeration of the inks and microstructures evolve with respect to different I/C ratios, solvent formulation, and external shear forces. Results from the three-phase rebuilt test designed to simulate the ink coating condition with single-frequency EIS measurement give information on how the ionomer/catalyst particle interactions form and recover during the coating process. In addition, the full frequency range EIS measurements provide complementary data of the ionic and electrical resistance of the ink before and after high shear applications. Furthermore, the observations of the effect of I/C and IPA/water ratios from this study provide insights on how to better engineer suitable catalyst inks and how to control specific CL microstructure without the need for time-consuming optimization and empirical studies.

Elucidation of Critical Catalyst Layer Phenomena toward High Production Rates for the Electrochemical Conversion of CO to Ethylene

High-Rate and Efficient Ethylene Electrosynthesis Using a Catalyst/Promoter/Transport Layer

Cooperative Effects Associated with High Electrolyte Concentrations in Driving the Conversion of CO2 to C2H4 on Copper

Carbon‐Efficient CO2 Electrolysis to Ethylene with Nanoporous Hydrophobic Copper

Concentrated Ethanol Electrosynthesis from CO 2 via a Porous Hydrophobic Adlayer

Anionic Ionomer: Released Surface-Immobilized Cations and an Established Hydrophobic Microenvironment for Efficient and Durable CO2-to-Ethylene Electrosynthesis at High Current over One Month

Understanding Limitations in Electrochemical Conversion to CO at Low CO2 Concentrations

Role of electrochemical cell configuration on the selectivity of CuZnAl-oxide-based electrodes for the continuous CO2 conversion: aqueous electrolyte vs. catholyte-less configuration

Impact of gas diffusion layer architecture on the performances of Cu-based electrodes for CO 2 electroreduction to ethylene in flow reactors

Elucidating the Roles of Nafion/Solvent Formulations in Copper-Catalyzed CO 2 Electrolysis

Temperature-dependent selectivity for CO electroreduction on copper-based gas-diffusion electrodes at high current densities

Investigation and Characterization of Interfacial Transport Phenomena in the Catalyst Layer Using Rheo-Impedance Measurement

(Invited)The Role of the Catalyst Microenvironment in the Electrochemical Reduction of Carbon Monoxide

Efficient electrically powered CO2-to-ethanol via suppression of deoxygenation

CO Electrolysis to Multicarbon Products over Grain Boundary-Rich Cu Nanoparticles in Membrane Electrode Assembly Electrolyzers

The Role of Interfacial Water in CO2 Electrolysis over Ni-N-C Catalyst in a Membrane Electrode Assembly Electrolyzer.

Interface-Enhanced Catalytic Selectivity on the C 2 Products of CO 2 Electroreduction

Converting CO 2 to multi-carbon products at >1 A/cm 2 using gas diffusion electrode based on commercial materials via transfer process engineering

High‐rate and Selective CO2 Electrolysis to Ethylene via Metal‐Organic Framework‐augmented CO2 Availability

Carbonized Yolk-shell Metal-Organic Frameworks for Electrochemical Conversion of CO2 into Ethylene

Carbon-Based Electron Buffer Layer on ZnOx -Fe5 C2 -Fe3 O4 Boosts Ethanol Synthesis from CO2 Hydrogenation