Abstract:Thermal energy storage plays an important role inimproving the working reliability and utilization efficiency of renewableenergy systems. Thermal energy storage includes sensible heat storage,latent heat storage using phase change material (PCM) and thermochemicalheat storage. In comparison with sensible heat storage, latent heatstorage has the distinct advantages of its high energy storage densityand stable temperature during the energy storage and release processes.However, low thermal conductivity of PCM is the common drawback forvarious latent heat energy storage systems. The purpose of the researchis to enhance the thermal conductivity of PCM by developing new form-stablecomposite phase change materials using expanded graphite matrix. Firstly,a preparation method “heating adsorption of liquid SA intoexpanded graphite (EG) matrix and compressing stable-shape composite”is employed to synthesis form- stable composite phase change material.Twenty samples with different EG contents and packed densities areprepared using stearic acid (SA) as phase change material and twokinds of EG with different dilatation as porous matrix. Secondly,the microstructures, thermal properties and thermal stabilities ofdifferent EG/SA samples are tested to analyze the influence of thedilatation of expanded graphite on the thermal performance of form-stablecomposite phase change materials. Moreover, EG/SA form-stable heatstorage units with different EG contents and packed densities arefabricated to analyze the thermal storage/release performance throughheating/cooling experiment. The microstructures of EG and EG/SA samplesare observed using scanning electron microscopy (SEM) and the resultsshow there exist obvious differences between two kinds of EG and SAdistribution in the samples. The EG/SA samples with high dilatationEG are even more uniform because the high dilatation EG has largerpore size and pore volume. The data obtained from differential scanningcalorimetry (DSC) show the addition of EG and compressing operationhave negligible effect on the latent heat and slightly increase thephase transition temperature of pure SA. The form-stable EG/SA compositePCMs have lower supercooling degree than pure SA. LFA447 flash thermaldiffusivity instrument is used to evaluate the effect of EG’sdilatation on the thermal conductivity of EG/SA samples. The resultsshow that the use of high dilatation EG is more effective to improvethe thermal conductivity of form-stable EG/SA composite PCMs whenpacked density is large. The radial thermal conductivity of form-stable20 wt.%EG/SA phase change composite with packed density of 950 kg m −3 is as high as 19.6 W m −1 K −1 when high dilatation EG is utilized.This figure is more than 110 times higher than that of pure SA. Finally,the thermal stability of EG/SA samples is conducted by repeating thecharging and discharging processes of SA. These samples prepared byhigh dilatation EG have better thermal stability than the samplesprepared by low dilatation EG. The EG with high dilatation can assurethe uniform distribution of SA inside EG/SA sample and thus preventthe leakage of liquid SA during the phase change transformation processdue to its dilated microstructure. The heating/cooling test resultsshow that the heat storage/release time of EG/SA composite units isabout 1/8–1/4 of that of pure SA unit, and this means the heattransfer can be significantly enhanced. It suggests that the form-stableEG/SA composite phase change materials prepared by high dilatationEG has good comprehensive performance due to its high thermal conductivity,good thermal stability and no leakage problem.

High-power-density packed-bed thermal energy storage using form-stable expanded graphite-based phase change composite

Preparation and Properties of Paraffin /LDPE /OMMT /graphite Phase Change Composite for Thermal Energy Storage

High Performance Form-Stable Expanded Graphite/stearic Acid Composite Phase Change Material for Modular Thermal Energy Storage

High-directional thermally conductive stearic acid/expanded graphite - Graphene films for efficient photothermal energy storage

Heat Transfer Enhancement of High Temperature Thermal Energy Storage Using Metal Foams and Expanded Graphite

N-eicosane/expanded Graphite As Composite Phase Change Materials for Electro-Driven Thermal Energy Storage

Preparation and thermal performance of form-stable expanded graphite/stearic acid composite phase change materials with high thermal conductivity

Enhanced thermal conductivity of waste sawdust-based composite phase change materials with expanded graphite for thermal energy storage

An assessment of the performance of heat transfer enhancement for optimizing high-temperature thermal energy storage

Preparation of a composite phase change material with high thermal storage capacity using modified expanded graphite as the matrix

Preparation and thermal performance enhancement of sodium thiosulfate pentahydrate- sodium acetate trihydrate /expanded graphite phase change energy storage composites

Demonstration of Mg(NO3)2·6H2O-based Composite Phase Change Material for Practical-Scale Medium-Low Temperature Thermal Energy Storage

Thermally Conductive and Shape‐Stabilized Polyethylene Glycol/Carbon Foam Phase‐Change Composites for Thermal Energy Storage

Eutectic Fatty Acids Phase Change Materials Improved with Expanded Graphite

High Thermal Conductivity Composite Phase Change Material with Zn2+ Metal Organic Gel and Expanded Graphite for Battery Thermal Management

A novel three-dimensional network-based stearic acid/graphitized carbon foam composite as high-performance shape-stabilized phase change material for thermal energy storage

High-Capacity High-Power Thermal Energy Storage Using Solid-Solid Martensitic Transformations

Micro-encapsulated paraffin/high-density polyethylene/wood flour composite as form-stable phase change material for thermal energy storage

A Low-Temperature Phase Change Material Based on Capric-Stearic Acid/Expanded Graphite for Thermal Energy Storage

Synthesis of novel shape-stabilized phase change materials with high latent heat and low supercooling degree for thermal energy storage

A structured phase change material integrated by MXene/AgNWs modified dual-network and polyethylene glycol for energy storage and thermal management