Abstract:Basic understanding of the fundamental processes in crystal growth as well as the structural quality of diamond synthesized by chemical vapour deposition on iridium surfaces has reached a high level for samples with (001) orientation. Diamond deposition on the alternative (111) surface is generally more challenging but of appreciable technological interest, too. In the present work, heteroepitaxy of diamond on Ir/YSZ/Si(111) with different off-axis angles and directions has been studied. During the growth of the first microns, strong and complex intrinsic stress states were rapidly formed. They restricted the range of suitable temperatures in this study to values between 830 °C and 970 °C. At low-stress conditions, the maximum growth rates were about 1 μm/h. They facilitated long-time processes which yielded pronounced structural improvements with minimum values of 0.08° for the azimuthal mosaic spread, 4 × 107 cm−2 for the dislocation density and 1.8 cm−1 for the Raman line width. This refinement is even faster than on (001) growth surfaces. It indicates substantial differences between the two crystal directions in terms of merging of mosaic blocks and annihilation of dislocations. Crystals with a thickness of up to 330 μm have been grown. The correlation of photoluminescence and μ-Raman tomograms with topography data also revealed fundamental differences in the off-axis growth between (001) and (111) orientation. Finally, the analysis of the microscopic structures at the growth surface provided the base for a model that can conclusively explain the intriguing reversal of stress tensor anisotropy caused by a simple inversion in sign of the off-axis angle.

Fabrication of self-standing large (111) single crystal diamond using bulk growth of (100) CVD diamond and lift-off process

Large-surface-area diamond (111) crystal plates for applications in high-heat-load wavefront-preserving x-ray crystal optics

Growth of well-adhered and smooth diamond thin films on fused silica substrates

Large Area Single-Crystal Diamond Synthesis by 915 MHz Microwave Plasma-Assisted Chemical Vapor Deposition

Local initial heteroepitaxial growth of diamond (111) on Ru (0001)/c-sapphire by antenna-edge-type microwave plasma chemical vapor deposition

Low-Temperature Growth Of Ultra-Thin Nano-Crystalline Diamond Films By Hfcvd In A Ch4/H-2 Mixture

Recent advances in high-growth rate single-crystal CVD diamond

High-rate growth of single-crystal diamond with an atomically flat surface by microwave plasma chemical vapor deposition

Characterization of an Epitaxial-Growth Diamond Thin Film

The Transformation from (111) to (100): A Routine to Large-Scale Epitaxial Diamond

Oriented and textured growth of (111) diamond on silicon using hot filament chemical vapour deposition

Stress engineering of high-quality single crystal diamond by heteroepitaxial lateral overgrowth

Overgrowth of Single Crystal Diamond Using Defect-Selective Etching and Epitaxy Technique in Chemical Vapor Deposition

Very high growth rate chemical vapor deposition of single-crystal diamond.

Grow Large High-Quality Diamonds with Different Seed Surfaces

Growth and characterization of heteroepitaxial (001) and (111) diamond on Ir/sapphire structures

Homoepitaxial overgrowth of (111) diamond films on Au-coated and Ni-coated substrates

Control of surface and bulk crystalline quality in single crystal diamond grown by chemical vapour deposition

Growth of two-inch free-standing heteroepitaxial diamond on Ir/YSZ/Si (001) substrates via laser-patterned templates

Growth, stress, and defects of heteroepitaxial diamond on Ir/YSZ/Si(111)

High optical quality multicarat single crystal diamond produced by chemical vapor deposition