Abstract:The Schockley–Quisser (SQ) limit of 28.64% is distant from the Sb 2 S 3 solar cells' record power conversion efficiency ( PCE ), which is 8.00%. Such poor efficiency is mostly owing to substantial interface-induced recombination losses caused by defects at the interfaces and misaligned energy levels. The endeavor of this study is to investigate an efficient Sb 2 S 3 solar cell structure via accurate analytical modeling. The proposed model considers different recombination mechanisms such as non-radiative recombination, Sb 2 S 3 /CdS interface recombination, Auger, SRH, tunneling-enhanced recombination, and their combined impact on solar cell performance. This model is verified against experimental work (Glass/ITO/CdS/Sb 2 S 3 /Au) where a good coincidence is achieved. Several parameters effects such as thickness, doping, electronic affinity, and bandgap are scrutinized. The effect of both bulk traps located in CdS and Sb 2 S 3 on the electrical outputs of the solar cell is analyzed thoroughly. Besides, a deep insight into the effect of interfacial traps on solar cell figures of merits is gained through shedding light into their relation with carriers' minority lifetime, diffusion length, and surface recombination velocity. Our research findings illuminate that the primary contributors to Sb 2 S 3 degradation are interfacial traps and series resistance. Furthermore, achieving optimal band alignment by fine-tuning the electron affinity of CdS to create a Spike-like conformation is crucial for enhancing the immunity of the device versus the interfacial traps. In our study, the optimized solar cell configuration (Glass/ITO/CdS/Sb 2 S 3 /Au) demonstrates remarkable performance, including a high short-circuit current ( J SC ) of 47.9 mA/cm 2 , an open-circuit voltage ( V OC ) of 1.16 V, a fill factor ( FF ) of 54%, and a notable improvement in conversion efficiency by approximately 30% compared to conventional solar cells. Beyond its superior performance, the optimized Sb 2 S 3 solar cell also exhibits enhanced reliability in mitigating interfacial traps at the CdS/Sb 2 S 3 junction. This improved reliability can be attributed to our precise control of band alignment and the fine-tuning of influencing parameters.

The influence of base thickness on textured silicon solar cells' efficiency

Influence of surface centers on the effective surface recombination rate and the parameters of silicon solar cells

Back Surface Recombination Velocity Dependent of Absorption Coefficient as Applied to Determine Base Optimum Thickness of an n+/p/p+ Silicon Solar Cell

Characterization and optimization of high-efficiency crystalline silicon solar cells

Effect of Width and Height of Textured Substrate on the Performance of Microcrystalline Silicon Based Solar Cell

Ultrathin Bifacial Passivated Emitter and Rear Cell with Inverted Pyramid Textures

Effect of the Back Surface Topography on the Efficiency in Silicon Solar Cells

Very thin crystalline silicon cells: A way to improve the photovoltaic performance at elevated temperatures

Small Pyramidal Textured Ultrathin Crystalline Silicon Solar Cells with Double-Layer Passivation.

Micro-textures for Efficient Light Trapping and Improved Electrical Performance in Thin-Film Nanocrystalline Silicon Solar Cells

Towards the efficiency limits of silicon solar cells: how thin is too thin?

Scrutinizing transport phenomena and recombination mechanisms in thin film Sb2S3 solar cells

Enhancement of light trapping for ultrathin crystalline silicon solar cells

Electromagnetic approach to ultrathin solar cell efficiencies

Design Investigation on 100 Μm-Thickness Thin Silicon PERC Solar Cells with Assistance of Machine Learning

Length Scale Dependence of Periodic Textures for Photoabsorption Enhancement in Ultra-thin Silicon Foils and Thick Wafers

Influence of the pattern shape on the photonic efficiency of front-side periodically patterned ultrathin crystalline silicon solar cells

Optical properties and performance of pyramidal texture silicon heterojunction solar cells: Key role of vertex angles

Lamella Silicon Solar Cell under Both Temperature and Magnetic Field: Width Optimum Determination

Monolithic Perovskite/Silicon Tandems with >28% Efficiency: Role of Silicon‐Surface Texture on Perovskite Properties

An In-Depth Analysis of the Silicon Solar Cell Key Parameters’ Optimal Magnitudes Using PC1D Simulations