Abstract:The authors present an in situ study of the effect of nitrogen plasma pulse time on the temporal evolution of the surface morphology of InN growth on a-plane sapphire at 250 °C by plasma assisted atomic layer epitaxy (ALEp). The growth surface evolution was monitored in real-time using grazing incidence small angle x-ray scattering (GISAXS) measurements at an x-ray incidence angle of 0.8°. Nitrogen plasma pulse time (tp) was varied between 15 and 30 s in 5-s steps, and for all tp, the near specular scattering broadens and correlated peaks develop and evolve along the Yoneda Wing (YW). For tp ≥ 20 s, a YW with one correlated length scale evolves. At the end of the growth, the longest correlated length scale is 16.54 nm for tp = 25 s. Porod analysis of GISAXS intensity at high qy for tp = 25 s shows the formation of mounded shapes at the early stage of nucleation that transitioned to cylinders after about 3 unit cells of InN growth. Additionally, at tp = 25 s, the growth rate is highest with root mean square surface roughness and carbon impurity levels at or below atomic force microscopy and x-ray photoelectron spectroscopy sensitivity limits, respectively. At tp < 25 s, the growth surface may be undersaturated and at tp > 30 s, it appears that trimethylindium precursor molecules start to decompose, resulting in higher carbon content in the film. Thus, the nature of GISAXS correlated length scale directly correlates with the material quality. Additional ex situ characterizations reveal an electron mobility of 6–31 cm2/V s for a 3–5 nm thick InN film on a-plane sapphire, which is similar to the reported value of 30 cm2/V s for a 1300 nm thick InN film grown by molecular beam epitaxy directly on sapphire. Thus, the combination of in situ synchrotron x-ray analysis and ex situ characterization is a powerful approach to develop understanding of the growth mechanisms of ALEp of III-N materials in order to improve the quality by reducing impurities and broaden material applications.

Droplet Controlled Growth Dynamics in Plasma-Assisted Molecular Beam Epitaxy of In(Ga)N Materials

Metal Droplet Effects on the Composition of Ternary Nitrides

Effect of Indium Droplets on Growth of InGaN Film by Molecular Beam Epitaxy

Plasma Assisted Molecular Beam Epitaxial Growth of GaN with Low Growth Rates and Their Properties

Growth Mechanisms of GaN/GaAs Nanostructures by Droplet Epitaxy Explained by Complementary Experiments and Simulations

Study on the Effects of Growth Rate on GaN Films Properties Grown by Plasma-Assisted Molecular Beam Epitaxy

The Influence of Indium Surfactant on the Electrical Properties of GaN Epilayers Grown by Metal-Organic Chemical Vapour Deposition

Electron cyclotron resonance plasma enhanced metalorganic chemical vapor deposition system with monitoring in situ for epitaxial growth of group-III nitrides

Efficient P-Type Doping of Gan Films by Plasma-Assisted Molecular Beam Epitaxy

In situ investigation of growth modes during plasma-assisted molecular beam epitaxy of (0001)GaN

Droplet epitaxy of InGaN quantum dots on Si (111) by plasma-assisted molecular beam epitaxy

Understanding the effect of nitrogen plasma exposure on plasma assisted atomic layer epitaxy of InN monitored by real time grazing incidence small angle x-ray scattering

Step-flow Growth of Al Droplet Free AlN Epilayers Grown by Plasma Assisted Molecular Beam Epitaxy

Analysis of GaN Crystal Growth Mechanism in Liquid-Phase Epitaxial Na-flux Method

Growth of Thick InN by Molecular Beam Epitaxy

Kinetically controlled InN nucleation on GaN templates by metalorganic chemical vapour deposition

The Investigation of Molecular Beam Epitaxy Growth of GaN by Molecular Dynamics Simulation

Influence of Mg doping on In adsorption and In incorporation in (In,Ga)N superlattices

Model for Low-Temperature Growth of Gallium Nitride

Step-Flow Growth of InN on N-Polarity GaN Template by Molecular Beam Epitaxy with a Growth Rate of 1.3μm/h