Abstract:In this study, two different adiabatic couplers are proposed based on the adiabatic mode evolution mechanism in the two-waveguide system. The mode conversion/transfer in vertically asymmetric adiabatic couplers is investigated. The proposed adiabatic couplers couple the beam modes from one waveguide to another using adiabatic mode evolution and enable the mode conversion/transfer between the designed modes. The k -vector frequency-dispersion diagram for the first adiabatic coupler is calculated, and the variation of the guided mode in the adiabatic coupler with the waveguide width is shown to guide the design of adiabatic couplers. The design results demonstrate that the proposed adiabatic mode couplers are substantially shorter than the linear-shape connection, but can achieve the same power mode conversion efficiency. The main function of the first adiabatic mode coupler designed is to convert the TE 0 mode in one port to the TM 0 mode in the other port, the structure only needs a length of 108 μm to achieve 90 % power conversion efficiency, and the traditional linear-shape connection requires 1540 μm to achieve the same conversion efficiency. As a result, the proposed adiabatic coupler size is 14 times shorter than the conventional design. Moreover, in the design of the second 3-dB adiabatic coupler, the adiabatic mode evolution transfer of the two lowest-order even and odd eigenmodes is implemented in a two tapered ridge waveguide system for 3-dB energy splitting. The proposed coupler will achieve a transfer efficiency greater than 90 % in the range of 1400 nm to 3760 nm when the device length is 47.5 μm, which is an ultra-wide operating bandwidth range.

Shortcut to adiabatic light transfer in waveguide couplers with a sign flip in the phase mismatch

Compact broadband silicon 3 dB coupler based on shortcuts to adiabaticity.

Design of efficient and compact adiabatic couplers based on adiabatic mode evolutions

Asymmetric Plasmonic-Dielectric Coupler with Short Coupling Length, High Extinction Ratio, and Low Insertion Loss.

Interlayer Slope Waveguide Coupler for Multilayer Chalcogenide Photonics

Study of GaAs asymmetric X-junction waveguide hybrid coupler

Si Photonic Wire Waveguide Devices

Compact and efficient coupler to interface hybrid dielectric-loaded plasmonic waveguide with silicon photonic slab waveguide

Efficient Adiabatic Silicon-on-insulator Waveguide Taper

Efficient Directional Coupler Based on Plasmonic Waveguide for Photonic Integrated Circuits

Broadband Coupler Between Silicon Waveguide and Hybrid Plasmonic Waveguide

Two-mode-interference Switching in Photonic Crystal Waveguides

Coupling Characteristics of Electromagnetic Waves in Parallel Three Photonic Crystal Waveguides and Its Application

A Full-Parameter, Broadband, Homogeneous, and Compact Waveguide Coupler Designed with Transformation Optics

Structurally-tolerant Vertical Directional Coupling Between Metal-Insulator-metal Plasmonic Waveguide and Silicon Dielectric Waveguide

Ultracompact And Wideband Power Splitter Based On Triple Photonic Crystal Waveguides Directional Coupler

Low-loss 3-dimensional waveguide crossing with a parabolic taper interlayer coupler based on a SiN-SiN-Si three-layer platform

An asymmetric non-uniform 3-dB directional coupler with 300-nm bandwidth

Compact Full Ka-Band Waveguide Directional Coupler Based on Rectangular Aperture Array with Stairs

Asymmetric, non-uniform 3-dB directional coupler with 300-nm bandwidth and a small footprint

Compact, Broadband, and Wide-Angle Optical Coupling for Silicon Waveguide