Abstract:In this study, a resistive humidity sensor for moisture detection at room temperature is presented. The thin film proposed as a critical sensing element is based on a quaternary hybrid nanocomposite CNHox//SnO2/ZnO/PVP (oxidated carbon nanohorns–tin oxide–zinc oxide–polyvinylpyrrolidone) at the w/w/w/w ratios of 1.5/1/1/1 and 3/1/1/1. The sensing structure consists of a Si/SiO2 dielectric substrate and interdigitated transducers (IDT) electrodes, while the sensing film layer is deposited through the drop-casting method. Morphology and composition of the sensing layers were investigated through scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDX), X-ray diffraction, and Raman spectroscopy. Each quaternary hybrid nanocomposite-based thin film’s relative humidity (RH) sensing capability was analyzed by applying a direct current with known intensity between two electrodes and measuring the voltage difference when varying the RH from 0% to 100% in a humid nitrogen atmosphere. While the sensor with CNHox/SnO2/ZnO/PVP at 1.5/1/1/1 as the sensing layer has the better performance in terms of sensitivity, the structure employing CNHox//SnO2/ ZnO/PVP at 3/1/1/1 (mass ratio) as the sensing layer has a better performance in terms of linearity. The contribution of each component of the quaternary hybrid nanocomposites to the sensing performance is discussed in relation to their physical and chemical properties. Several alternative sensing mechanisms were taken into consideration and discussed. Based on the measured sensing results, we presume that the impact of the p-type semiconductor behavior of CNHox, in conjunction with the swelling of the hydrophilic polymer, is dominant and leads to the overall increasing resistance of the sensing film.

Copper-oxide Nanowires based Humidity Sensor

Polymer single-nanowire for optical humidity sensing

QCM-based Humidity Sensor and Sensing Properties Employing Colloidal SnO2 Nanowires

A RESISTIVE-TYPE NANOSTRUCTURED HUMIDITY SENSOR PREPARED BY ELECTROSPINNING

Humidity Sensors Based on ZnO/TiO2 Core/shell Nanorod Arrays with Enhanced Sensitivity

A Flexible Humidity Sensor Based on Co3O4 Nanoneedles with High Sensitivity and Quick Response

Characterization of Highly-Aligned ZnO Nanowire Arrays and Its Application in Humidity Sensors

A Novel Humidity Sensor Based on Alumina Nanowire Films

Properties of humidity sensing ZnO nanorods-base sensor fabricated by screen-printing

A nanowire WO3 humidity sensor integrated with micro-heater and inverting amplifier circuit on chip manufactured using CMOS-MEMS technique

Optical Humidity Sensor Based on ZnO Nanomaterials

A High-Sensitivity Ionization Humidity Sensor Based on Carbon Nanotubes

Ultrafast Self-Assembly MoS2/Cu(OH)2 Nanowires for Highly Sensitive Gamut Humidity Detection with an Enhanced Self-Recovery Ability.

Positive Temperature Coefficient Resistance and Humidity Sensing Properties of Cd-doped ZnO Nanowires

Hydrothermal Synthesis of Co–ZnO Nanowire Array and Its Application As Piezo-Driven Self-Powered Humidity Sensor with High Sensitivity and Repeatability

A humidity sensor based on KCl-doped SnO2 nanofibers

High-Performance Humidity Sensors from Ni(So4)(0.3)(Oh)(1.4) Nanobelts

Fabrication of a Single CuO Nanowire-based Gas Sensor Working at Room Temperatur

A Flexible Humidity Sensor with Wide Range, High Linearity, and Fast Response Based on Ultralong Na2Ti3O7 Nanowires

High-temperature humidity sensors based on WO3–SnO2 composite hollow nanospheres

Quaternary Holey Carbon Nanohorns/SnO2/ZnO/PVP Nano-Hybrid as Sensing Element for Resistive-Type Humidity Sensor