Abstract:The design and usability of a fully autonomous robotic control system (SunbYte - Sheffield University Balloon "lYfted" TElescope) for solar tracking and observational applications onboard high-altitude balloons are addressed here. The design is based on a six-step development plan balancing scientific objectives and practical engineering requirements. The high-altitude solar observational system includes low-cost components such as a Cassegrain-type telescope, stepper motors, harmonic drives, USB cameras and microprocessors. OpenCV installed from ROS (Robotic Operating System), python and C facilitated the collection, compression, and processing of housekeeping and scientific data. This processed data was then transmitted to the ground station through the launch vehicle's telecommunication link. The SunbYte system allows the brightest spot in the sky, the sun, to be identified, and a telescope pointed towards it with high enough accuracy that a scientific camera can capture images. This paper gathers and presents the results from primarily two missions with the High-Altitude Student Platform (HASP, NASA Balloon Program office and LaSpace). Additionally, a discussion will be made comparing these with an earlier iteration flown with the German-Swedish "REXUS/BEXUS" programme coordinated by the European Space Agency. By capturing and analysing a series of tracking images with the location of the Sun at the calibrated centre, the system demonstrated the tracking capabilities on an unstable balloon during ascent. Housekeeping sensor data was collected to further analyse the thermal and mechanical performance. The low temperature increased friction in the drive train and reduced the responsiveness of the harmonic drive actuation system. This caused some issues which require further work in future missions, for example, with SunbYte 4 and its work when flying with the HEMERA ZPB (Zero Pressure Balloon) program.

Thermal, Structural, and Optical Analysis of a Balloon-Based Imaging System

Method for enhancing stability in multi-beam microscopy

Stabilization of Laser Beam Position Based on a Closed-Loop Fast Steering Mirror System

Space-quality data from balloon-borne telescopes: the High Altitude Lensing Observatory (HALO)

Precise Pointing and Stabilization Performance for the Balloon-borne Imaging Testbed (BIT): 2015 Test Flight

Design and Characterization of a Balloon-Borne Diffraction-Limited Submillimeter Telescope Platform for BLAST-TNG

Robust line-of-sight pointing control on-board a stratospheric balloon-borne platform

Analysis Method of Beam Pointing Stability Based on Optical Transmission Matrix

Structural thermal optical performance (STOP) analysis and experimental verification of an hyperspectral imager for the HYPSO CubeSat

From SuperBIT to GigaBIT: Informing next-generation balloon-borne telescope design with Fine Guidance System flight data

Integrated Analysis of Line-Of-Sight Stability of Off-Axis Three-Mirror Optical System

Thermal Stability Optimization of the Luojia 1-01 Nighttime Light Remote-Sensing Camera's Principal Distance

SunbYte: an autonomous pointing framework for low-cost robotic solar telescopes on high altitude balloons

The Balloon-Borne Large Aperture Submillimeter Telescope Observatory

Thermal Effect on Star Sensor

Thermal architecture for a cryogenic super-pressure balloon payload: design and development of the Taurus flight cryostat

Thermal Analysis of Large Telescope Structure

Pointing System for the Balloon-Borne Astronomical Payloads

A physical optics characterization of the beam shape and sidelobe levels for the Atacama Large Aperture Submillimeter Telescope (AtLAST)

Polarized-Light Difference Method and Equipment for High-Precisely Measuring Star Sensor Bracket Thermal Deformation Based on Laser Autocollimation

A Detailed Thermal Analysis of the Binospec Spectrograph