Abstract:The possibility of using lasers to achieve previously unobtainable states of matter in the laboratory gained much attention following the demonstration of the first pulsed laser in 1960. In the following few years there was plenty research activity as attempts were made to increase the peak power and focused intensity in order to reach extreme conditions within the laboratory. Laser-acceleration technology is rapidly developing. Petawatt class lasers have been constructed for specific research activities, including particle acceleration, inertial confinement fusion and radiation therapy, and for secondary source generation (X rays, electrons, protons, neutrons and ions). As a new source of ionizing radiation, dose measurement in ultra-intense and ultra-short laser facilities is of great value for radiation protection of the environment, occupational staff and shielding design in laser device design stage. Owing to the pulsed and mixed characteristics of radiation field around the laser facility, it is really challenging to accurately measure the dose equivalent induced by bremsstrahlung photon in the target chamber of the laser facility. Moreover, the rationality of dose assessment model needs more experimental data and to be further verified. To reach this point, the Monte-Carlo program FLUKA was employed to characterize the radiation filed distribution. Firstly, a complete and thorough target chamber module was established according to the XG-Ⅲ geometry parameter and material composition. The in-chamber and out-chamber dose distribution were then calculated and analyzed based on the existing theoretical model of electron source term and typical experimental conditions. The electron energy distribution, characteristic electron temperature, scaling laws and laser-to-energy conversion efficiency were introduced. Secondly, the typical electron spectrum was divided into four intervals. The portion of different energy intervals to the total equivalent dose was determined. Thirdly, a bremsstrahlung photon dose equivalent measuring module was designed and optimized for ultra-intense and ultra-short laser facilities. The simulation results indicate that: 1) The electron dose equivalent is higher than the bremsstrahlung photons both inside and outside the target chamber; 2) The dose equivalent contribution of 0.15 MeV electron energy interval to the total energy range is dominant, and the module was design based on the conclusion; 3) The designed module mainly consists of PMMA and metallic shielding material. With this approach, the module can reduce the electron dose equivalent to 0.3% and photon dose equivalent to 69.1%. The dose ratio of electron to photon is about 128%. In addition, 5% of the total photon dose is contributed by the occurrence of bremsstrahlung of highenergy electron in PMMA.

Simulation of dose rate distribution in a Betatron laboratory

A Simulation Study on the Flash X-Ray Spectra Spatial Distribution

Physical Analysis of the Radiation Shielding for the Medical Accelerators

Radiation Field Simulation of C-ADS Injector II

Design and beam dynamics simulation of an 8 MeV compact accelerator-driven neutron source

Study on Photon Dose of Ultra-intense and Ultra-short Laser Facility Based on Fully Monte-Carlo Simulation

Development of a dose-adjustable a-particle irradiation facility for radiobiological studies

The Monte Carlo Simulation of Tsinghua Homo-Source Dual-Beam Medical Accelerator

STUDY ON THE SHIELDING AND DOSE RATE DISTRIBUTIONS OF THERAPEUTIC PROTON SYNCHROTRON ACCELERATOR BASED ON FLUKA

A simulation study of a dual-plate in-room PET system for dose verification in carbon ion therapy

Establishment of a virtual source model of Varian RapidARC linear accelerator with 6 MeV X-ray

A torus source and its application for non-primary radiation evaluation

An integrated system for measuring 3D dose distributions of carbon-ion pencil beams in regular QA practice

Simulation of Physical Parameters for a Photoneutron Source

Beam Dynamics Design for a Compact Accelerator-Driven Neutron Source

High-energy betatron source driven by a 4-PW laser with applications to non-destructive imaging

Dose Measurement Experiments for Single and Composite Targets in 6 Mev Linear Accelerators

Design of the Input Power Coupler for Boron Neutron Capture Therapy Drift Tube Linac

Start-to-end Modeling and Transmission Efficiency Optimization for a Cyclotron-Based Proton Therapy Beamline

Neutron Activation Analysis Based on AB-BNCT Treatment Room

Neutron dose evaluation inside high-energy accelerator irradiation vault using LR-115