Abstract:Severe tool wear is always considered as a main negative result in the process of drilling Ti-6Al-4V alloy. Although the idea of employing one-dimensional longitudinal ultrasonic vibration in the drilling process to reduce tool wear has been proposed for many years, studies on longitudinal-torsional composite ultrasonic vibration–assisted drilling (LT-UAD) are seldom reported. LT-UAD is a hybrid machining process in which high-frequency and low-amplitude vibrations are superimposed simultaneously on the rotational direction and the axial direction of the drilling bit respectively. In this study, a hollow vibration converter with thread grooves is presented for LT-UAD purpose. Based on an in-depth kinematic analysis, a condition for separating the tool from the workpiece is derived, indicating that a lower feed rate, a lower spindle speed, and a higher amplitude are more advantageous. Machining experiments are performed, wherein good agreement is found between the experimental and theoretical results. The results show that LT-UAD has obvious advantages over longitudinal ultrasonic vibration–assisted drilling and conventional drilling in reducing tool wear. Additionally, the influences of the vibration amplitude, spindle speed, and feed rate on the flank wear width are analyzed, revealing the influences of the three factors in descending order are feed rate, amplitude, and spindle speed. The optimum machining parameters are obtained as 23 μm of amplitude, 385 r/min of spindle speed, and 0.06 mm/r of feed rate. Furthermore, a reliable regression model of flank wear width is established based on response surface methodology. With this prediction model, the flank wear width of drill bit under different machining parameters can be accurately predicted.

Feasibility study of high feed axial ultrasonic vibration turning of Ti6Al4V

Fundamental Machining Characteristics of Ultrasonic Assisted Turning of Titanium Alloy Ti-6Al-4V

Study on the Simulation and Experiment of Ultrasonic-assisted Vibration Drilling of Ti6Al4V

Investigation on cutting forces and tool wear in high-speed milling of Ti-6Al-4V assisted by longitudinal torsional ultrasonic vibrations

Performance Analysis of the Longitudinal-Torsional Ultrasonic Milling of Ti-6Al-4V

Study on Ultra-Precision Processing of Ti-6Al-4V with Different Ultrasonic Vibration-Assisted Cutting Modes

Experimental Study on Ultrasonic Assisted Turning of GH4068 Superalloy

Effect of Ultrasonic Vibration Parameters on Machining Performance Based on Tool-Workpiece Contact Ratio

Finite element simulation of ultrasonic assisted turning of titanium alloy based on ALE method

Study on tool wear in longitudinal-torsional composite ultrasonic vibration–assisted drilling of Ti-6Al-4V alloy

Research on turning of titanium alloy based on the electro-plastic-ultrasonic vibration coupling effect

Effect of high-speed ultrasonic vibration cutting on the microstructure, surface integrity, and wear behavior of titanium alloy

Optimization Milling Force and Surface Roughness of Ti-6Al-4V Based on Ultrasonic-Assisted Milling (UAM): An Experimental Study

Unravelling the influence of vibration on material removal and microstructure evolution in ultrasonic transversal vibration-assisted helical milling of Ti-6Al-4V holes

Investigation of Cutting Force in Longitudinal-Torsional Ultrasonic-Assisted Milling of Ti-6Al-4V

Tests for ultrasonic elliptical vibration-assisted turning of titanium alloy

Influence of Longitudinal-Torsional Ultrasonic-Assisted Vibration on Micro-Hole Drilling Ti-6Al-4V

Experimental Investigation on Micro-Groove Manufacturing of Ti-6Al-4V Alloy by Using Ultrasonic Elliptical Vibration Assisted Cutting.

CFD aided finite element modeling for spot cooled vibration assisted turning of Ti6Al4V alloy

Research on Homogenization and Surface Integrity of Ti-6Al-4V Alloy by Longitudinal-Torsional Coupled Ultrasonic Vibration Ball-End Milling