The Effect of Process Parameters on the Temperature and Stress Fields in Directed Energy Deposition Inconel 690 Alloy

Chen Liu,Yu Zhan,Hongjian Zhao,Shuo Shang,Changsheng Liu

DOI: https://doi.org/10.3390/ma17061338

IF: 3.4

2024-03-15

Materials

Abstract:Additive manufacturing (AM) technology has the advantages of designability, short process times, high flexibility, etc., making it especially suitable for manufacturing complex high-performance components for high-end industrial systems. However, the intensive temperature gradients caused by the rapid heating and cooling processes of AM can generate high levels of residual stresses, which directly affect the precision and serviceability of the components. Taking Inconel 690 alloy, which is widely used in nuclear power plants, as the research object, a thermo-coupled mechanical model of temperature field and residual stress field of directed energy deposition (DED) of Inconel 690 was established based on ABAQUS 2019 finite element software to study the influence of process parameters on the temperature history and the distribution of residual stresses in the DED process. The experimental results show that the peak temperature of each layer in the fabrication process increases with the increase in laser power and preheating temperature, and decreases with the increase in scanning speed and interlayer dwell time. Substrate preheating only has a large effect on the peak temperature of the first four layers. Residual stresses are mainly concentrated in the upper and middle parts, the bottom of the substrate, and the sides combined with the substrate, and the residual stresses increase with the increasing laser power and decrease with the increasing interlayer dwell time. Decreasing laser power, longer dwell time, higher preheating temperature, and appropriate scanning speed are beneficial for the reduction in residual stresses in Inconel 690 components. This research has important significance for the process design and residual stress modulation in the additive manufacturing of Inconel 690 alloy.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering

What problem does this paper attempt to address?

The problem that this paper attempts to solve is the influence of different process parameters on the temperature field and stress field during the Directed Energy Deposition (DED) process. Specifically, the research focuses on Inconel 690 alloy, which is widely used in nuclear power plants. During the DED process, the high - intensity temperature gradient caused by rapid heating and cooling will generate high residual stress, and these residual stresses directly affect the accuracy and service performance of components. Therefore, by establishing a thermo - mechanical coupling model, the researchers aim to explore how process parameters such as laser power, scanning speed, inter - layer dwell time and substrate preheating temperature affect the temperature history and residual stress distribution, in order to provide a theoretical basis for the additive manufacturing process design and residual stress regulation of Inconel 690 alloy.

The key to the paper is to predict the changes in temperature and stress fields through finite element analysis (FEA), thereby optimizing process parameters, reducing residual stress, and improving the fatigue performance and dimensional stability of the material. This is not only crucial for improving the quality of Inconel 690 alloy components, but also provides important reference value for the additive manufacturing of other high - performance materials.