Association between glycemic control and birthweight with glycated albumin in Chinese women with gestational diabetes mellitus

Hua-ping Li,Feng‐Huan Wang,Min‐fang Tao,Ya-juan Huang,W. Jia

DOI: https://doi.org/10.1111/jdi.12383

2015-07-14

Journal of Diabetes Investigation

Abstract:To assess glycated albumin (GA) as a potential glycemic index in managing gestational diabetes mellitus (GDM).

What problem does this paper attempt to address?

A Phenomenological Model for Thermally-Induced Hysteresis in Polycrystalline Shape Memory Alloys with Internal Loops

Yuxiang Han,Haoyuan Du,Linxiang Wang,Roderick Melnik

DOI: https://doi.org/10.1177/1045389x211048228

IF: 2.7

2021-01-01

Journal of Intelligent Material Systems and Structures

Abstract:In the current study, a 1-D phenomenological model is constructed to capture the temperature-induced hysteretic response in polycrystalline shape memory alloys (SMAs). The martensitic and austenitic transformations are regarded as the first-order transitions. A differential single-crystal model is formulated on the basis of Landau theory. It is assumed that the transformation temperatures follow the normal distribution among the grains due to the anisotropic stress field developed in the material. The polycrystalline hysteretic response is expressed as the integration of single-crystal responses. Besides, the prediction strategy for incomplete transitions is presented, and the first-order reversal curves are obtained via density reassignment. The proposed model is numerically implemented for validation. Comparisons between the modeling results and the experimental ones demonstrate the capability of the proposed model in addressing the hysteresis in thermally-induced phase transformations.
Computational Martensite Re-Orientation in Shape Memory Alloys and the Related Hysteretic Dynamics

Linxiang Wang,Jun Yang,Junbo Lei,Fuzai Lv

DOI: https://doi.org/10.1088/0965-0393/22/4/045006

IF: 2.421

2014-01-01

Modelling and Simulation in Materials Science and Engineering

Abstract:In this paper, an approach based on the nonlinear theory of elastic dynamics is proposed to model microstructure evolution in a shape memory alloy patch. The hysteretic dynamics of the patch at the macro-scale is also modeled by employing Hamilton's principle. The elastic potential energy function is constructed as non-convex on the deviatoric strain, and the governing equations are formulated as two coupled wave equations in terms of the two displacement components. Square to rectangle transformations and rectangle variant re-orientations are modeled by simulating the transitions of system states from one stable branch of the non-convex constitutive relation to another. The proposed model allows a robust implementation of conventional finite element analysis with all typical boundary conditions, but with strong nonlinearity. Numerical results for microstructure evolution caused by boundary stress loadings are presented, laminated structures and needle-like microstructures, which are often observed in experimental investigations, are also obtained. Hysteretic dynamics at the macro-scale is presented together with microstructure evolution.
Experimentally correlating thermal hysteresis and phase compatibility in multifunctional Heusler alloys

Alberto A. Mendonça,Luis Ghivelder,Pablo L. Bernardo,Hanlin Gu,Richard D. James,Lesley F. Cohen,Angelo M. Gomes

DOI: https://doi.org/10.1103/PhysRevMaterials.4.114403

2020-07-15

Abstract:Thermal hysteresis is recognized as one of the main drawbacks for cyclical applications of magnetocaloric and ferromagnetic shape memory materials with first order transformations. As such, the challenge is to develop strategies that improve the compatibility between the phases involved in the transitions and study its influence on thermal hysteresis. With this purpose, we explore the thermal, structural and magnetic properties of the Ni2Mn1-xCuxGa0.84Al0.16 Heusler alloys. The alloys present a thermal hysteresis reduction of ~60% when the Cu content in the compound varies from x = 0.10 to x = 0.25, with a minimum hysteresis width of 6 K being achieved. We applied the geometric non-linear theory of martensite to address the phase compatibility, quantified by the parameter lambda2, the middle eigenvalue of the transformation stretch tensor, and found that the minimum of hysteresis is associated with a better crystallographic compatibility (lambda2 closer to 1) between the austenite and martensite phases. In addition, we show that the valley-like properties of hysteresis found in the Ni2Mn1-xCuxGa0.84Al0.16 compounds is present in several other alloys in the literature. These results provide new pathways to understand as well as to masters the phase compatibility and ultimately achieve a low thermal hysteresis in multifunctional Heusler alloys.

Materials Science
Molecular dynamics simulations of ultralow hysteretic behavior in super-elastic shape memory alloys

Xuefei Tao,Yang Yang,Hongxiang Zong,Xiangdong Ding,Kaiyuan Yu,Turab Lookman,Jun Sun

DOI: https://doi.org/10.1016/j.actamat.2022.117973

IF: 9.4

2022-06-01

Acta Materialia

Abstract:Shape memory alloys (SMAs) that exhibit superelasticity with large recoverable strain and small hysteresis are in demand for practical applications, although their synthesis remains a challenge. We introduce metastable engineering to dope conventional SMA solid-solution atoms of relatively high concentration with "weak" local lattice distortion to realize ultralow hysteretic superelasticity. Large-scale molecular dynamic (MD) simulations of NiTi-based SMAs are performed to demonstrate how the presence of 2 ∼ 4 at.% Nb dopants lead to a stress-induced transition from a metastable pretransitional state to a strain-glass state. This is facilitated by a macroscopically homogeneous and continuous phase transformation in the course of superelastic loading and unloading. This spinodal decomposition-like phase transformation process endows SMAs with anhysteretic superelasticity that is insensitive to loading direction and grain size (below 15 nm). These findings show promise of achieving ultralow hysteretic superelasticity with large recoverable strain for SMAs.

materials science, multidisciplinary,metallurgy & metallurgical engineering
Data-driven study of composition-dependent phase compatibility in NiTi shape memory alloys

Sina Hossein Zadeh,Cem Cakirhan,Danial Khatamsaz,John Broucek,Timothy D. Brown,Xiaoning Qian,Ibrahim Karaman,Raymundo Arroyave

2024-02-20

Abstract:The martensitic transformation in NiTi-based Shape Memory Alloys (SMAs) provides a basis for shape memory effect and superelasticity, thereby enabling applications requiring solid-state actuation and large recoverable shape changes upon mechanical load cycling. In order to tailor the transformation to a particular application, the compositional dependence of properties in NiTi-based SMAs, such as martensitic transformation temperatures and hysteresis, has been exploited. However, the compositional design space is large and complex, and experimental studies are expensive. In this work, we develop an interpretable piecewise linear regression model that predicts the $\lambda_2$ parameter, a measure of compatibility between austenite and martensite phases, and an (indirect) factor that is well-correlated with martensitic transformation hysteresis, based on the chemical features derived from the alloy composition. The model is capable of predicting, for the first time, the type of martensitic transformation for a given alloy chemistry. The proposed model is validated by experimental data from the literature as well as in-house measurements. The results show that the model can effectively distinguish between $B19$ and $B19^{\prime}$ regions for any given composition in NiTi-based SMAs and accurately estimate the $\lambda_2$ parameter. Our analysis also reveals that the weighted average of the quotient of the first ionization energy and the Voronoi coordination number is a key compositional characteristic that correlates with the $\lambda_2$ parameter and thermodynamic responses, including the transformation hysteresis, martensite start temperature, and critical temperature. The work herein demonstrates the potential of data-driven methodologies for understanding and designing NiTi-based SMAs with desired transformation characteristics.

Materials Science
Superelasticity over a wide temperature range in metastable β-Ti shape memory alloys

Chengyang Xiong,Yan Li,Jian Zhang,Yu Wang,Wentao Qu,Yuancao Ji,Lishan Cui,Xiaobing Ren

DOI: https://doi.org/10.1016/j.jallcom.2020.157090

IF: 6.2

2021-02-01

Journal of Alloys and Compounds

Abstract:Shape memory alloys (SMAs) offer many technological advantages in various applications due to shape memory effect and superelasticity. Among them, superelasticity persists within a narrow temperature range (<100 K), beyond which, superelasticity disappears due to the loss of reversibility in the thermoelastic martensite. Here we present a unique metastable β-Ti SMA of Ti-19Nb-10Zr-1Fe, showing the classic superelasticity over a wide temperature range from 123 K to 373 K. It is verified experimentally to be originated from two concurrent nano-scale transitions: β → α″ martensitic nanodomains (strain glass transition), and β → nano-sized a-ω precipitates. Requiring no pre-training, a classic superelasticity with stress plateaus was associated with the reversible stress-induced strain glass to martensite transformation by in-situ SXRD. Further, a temperature-stress phase diagram was constructed, which facilitates the understanding of wide temperature superelasticity in metastable β-Ti SMAs, and may serve as a guide map for future designing and application of advanced β-Ti based SMAs.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
Thermomechanical modeling of nonlinear internal hysteresis due to incomplete phase transformation in pseudoelastic shape memory alloys

Jun Wang,Xiaojun Gu,Yingjie Xu,Jihong Zhu,Weihong Zhang

DOI: https://doi.org/10.1007/s11071-020-06121-4

IF: 5.741

2021-01-01

Nonlinear Dynamics

Abstract:This paper presents a thermomechanical model for pseudoelastic shape memory alloys (SMAs) accounting for internal hysteresis effect due to incomplete phase transformation. The model is developed within the finite-strain framework, wherein the deformation gradient is multiplicatively decomposed into thermal dilation, rigid body rotation, elastic and transformation parts. Helmholtz free energy density comprises three components: the reversible thermodynamic process, the irreversible thermodynamic process and the physical constraints of both. In order to capture the multiple internal hysteresis loops in SMA, two internal variables representing the transition points of the forward and reverse phase transformation, $\phi _s^f$ and $\phi _s^r$, are introduced to describe the incomplete phase transformation process. Evolution equations of the internal variables are derived and linked to the phase transformation. Numerical implementation of the model features an Euler discretization and a cutting-plane algorithm. After validation of the model against the experimental data, numerical examples are presented, involving a SMA-based vibration system and a crack SMA specimen subjected to partial loading–unloading case. Simulation results well demonstrate the internal hysteresis and free vibration behavior of SMA.

engineering, mechanical,mechanics
Hysteresis in Magnetic Shape Memory Composites: Modeling and Simulation

Sergio Conti,Martin Lenz,Martin Rumpf

DOI: https://doi.org/10.1016/j.jmps.2015.12.010

2015-02-23

Abstract:Magnetic shape memory alloys are characterized by the coupling between a structural phase transition and magnetic one. This permits to control the shape change via an external magnetic field, at least in single crystals. Composite materials with single-crystalline particles embedded in a softer matrix have been proposed as a way to overcome the blocking of the transformation at grain boundaries. We investigate hysteresis phenomena for small NiMnGa single crystals embedded in a polymer matrix for slowly varying magnetic fields. The evolution of the microstructure is studied within the rate-independent variational framework proposed by Mielke and Theil (1999). The underlying variational model incorporates linearized elasticity, micromagnetism, stray field and a dissipation term proportional to the volume swept by the phase boundary. The time discretization is based on an incremental minimization of the sum of energy and dissipation. A backtracking approach is employed to approximately ensure the global minimality condition. We illustrate and discuss the influence of the particle geometry (volume fraction, shape, arrangement) and the polymer elastic parameters on the observed hysteresis and compare with recent experimental results.

Numerical Analysis,Computational Physics
Efficient phase-field simulation for linear superelastic NiTi alloys under temperature gradients

Tao Xu,Chunyu Wang,Yuquan Zhu,Yu Wang,Yabin Yan,Jie Wang,Takahiro Shimada,Takayuki Kitamura

DOI: https://doi.org/10.1016/j.ijmecsci.2023.108592

IF: 7.3

2023-12-01

International Journal of Mechanical Sciences

Abstract:Engineering the martensitic transformation (MT) with exceptional and controllable properties is essential for the innovative application of shape memory alloys (SMAs) in advanced technologies. Herein, we combine high-throughput (HTP) phase-field simulations and machine learning approaches to propose the concept of “temperature-controlled mechanics” and demonstrate that it is possible to design NiTi alloys with outstanding mechanical properties that integrate ultra-low modulus, linear superelasticity, and no hysteresis in environments with temperature gradients. These nontrivial mechanical properties originate from continuous variations in the critical stress for the MT, which contributes to a gradual and continuous MT rather than a sharp first-order transition as occurs in common SMAs. An active learning workflow based on uncertainty sampling is employed to guide phase-field simulations to efficiently clarify and optimize the temperature in the environment for different NiTi alloys with the desired properties. Furthermore, the SISSO (Sure Independence Screening and Sparsifying Operator) algorithm is applied to the datasets from the HTP simulations to establish an explicit expression for the Young's modulus, which is verified by additional phase-field simulations and is instructive for the inverse design of the temperature field. The present study not only provides fundamental insights into the effects of temperature gradients on MTs and overall mechanical properties, but also offers a promising computational approach for developing advanced materials with extraordinary properties.

engineering, mechanical,mechanics
The Role of Adaptive Martensite in Magnetic Shape Memory Alloys

Robert Niemann,Ulrich K. Rößler,Markus E. Gruner,Oleg Heczko,Ludwig Schultz,Sebastian Fähler

DOI: https://doi.org/10.1002/adem.201200058

IF: 3.6

2012-06-18

Advanced Engineering Materials

Abstract:Magnetic shape memory materials require a high twin boundary mobility and low hysteresis for applications mainly as actuators, sensors, and magnetocaloric cooling elements. Usually, outstanding properties are found only in samples with a modulated martensitic structure. Here, we analyze the question why a modulated structure is beneficial and show evidence that the modulated martensite is not an equilibrium phase but a nanoscale microstructure of non‐modulated (NM) martensite. In this review, we combine results from continuum and atomistic theory, as well as local and integral measurements on the model system Ni–Mn–Ga. Following the concept of adaptive martensite the modulated phase forms to minimize elastic energy near the phase boundary by introducing low‐energy twin boundaries between lamellae of the NM martensite that have widths of a few unit cells. Magnetic shape memory materials require a high twin boundary mobility and low hysteresis for applications. Outstanding properties are found in samples with a modulated martensitic structure. Following the concept of adaptive martensite, this modulation forms to minimize elastic energy near the phase boundary by introducing low‐energy twin boundaries between lamellae of the non‐modulated martensite with widths of a few unit cells. We combine theory and experiment to understand modulated martensite.

materials science, multidisciplinary
Making metals linear super-elastic with ultralow modulus and nearly zero hysteresis

Jiaming Zhu,Yipeng Gao,Dong Wang,Ju Li,Tong-Yi Zhang,Yunzhi Wang,Tongyi Zhang

DOI: https://doi.org/10.1039/C8MH01141A

IF: 13.3

2019-10-07

Materials Horizons

Abstract:We demonstrate a novel materials design approach to achieve unprecedented properties by utilizing nanoscale chemo-mechanical coupling. In particular, by using computer simulations we demonstrate how to engineer ultralow modulus (12 GPa), nearly hysteresis-free, and linear super-elastic metals with a giant elastic strain limit (2.7%) by creating appropriate concentration modulations (CMs) at the nanoscale in the parent phase and by pre-straining to regulate the stress-induced martensitic transformation (MT). The nanoscale CMs created via spinodal decomposition produce corresponding phase stability modulations, suppress autocatalysis in nucleation, impose nano-confinements on growth, and hinder long-range ordering of transformation strain during the MT, which changes the otherwise sharp first-order transition into a smeared, macroscopically continuous transition over a large stress range. The pre-straining generates retained martensitic particles that are stable at the test temperature after unloading and act as operational nuclei in subsequent load cycles, eliminating the stress–strain hysteresis and offering an ultralow apparent Young's modulus. Materials with a high strength and an ultralow apparent Young's modulus have great potential for application in orthopaedic implants.

materials science, multidisciplinary,chemistry
Large recoverable strain with suitable transition temperature in TiNb-based multicomponent shape memory alloys: First-principles calculations

Xun Sun,Hualei Zhang,Dong Wang,Qiaoyan Sun,Shuangshuang Zhao,Song Lu,Wei Li,Levente Vitos,Xiangdong Ding

DOI: https://doi.org/10.1016/j.actamat.2021.117366

IF: 9.4

2021-12-01

Acta Materialia

Abstract:TiNb-based shape memory alloys (SMAs) have great potentials in biomaterials. However, high transition temperature or small recoverable strain limit their application. Using first-principles method, we systematically study the recoverable strain and transition temperature of TiNb-based binary, ternary, and high-entropy alloys (HEAs), and aim to lower the transition temperature and improve the recoverable strain at the same time. We find that the employed approach describes accurately the lattice strain by comparing with the available experimental results. It is well known that there is a positive correlation between lattice strain and recoverable strain in SMAs. Thus, we have evaluated the magnitude of recoverable strain of SMAs by calculating the lattice strain. Meanwhile, we correlate the available measured martensitic transformation start temperature (Ms) with the calculated energy difference between β and α'' phases in Ti-Nb binary alloys. According to this relation, we evaluate the Ms in other TiNb-based alloys. We find that Zr is a good alloying element that can decrease considerably the Ms and keep the lattice (recoverable) strain almost unchanged simultaneously. Finally, an Al-containing Ti24Nb25Zr24Sc24Al3 HEA has been designed to have simultaneously large recoverable strain and low transition temperature.

materials science, multidisciplinary,metallurgy & metallurgical engineering
Data-driven shape memory alloy discovery using Artificial Intelligence Materials Selection (AIMS) framework

W. Trehern,R. Ortiz-Ayala,K.C. Atli,R. Arroyave,I. Karaman

DOI: https://doi.org/10.1016/j.actamat.2022.117751

IF: 9.4

2022-04-01

Acta Materialia

Abstract:One of the obstacles to the deployment of shape memory alloys (SMAs) in solid-state actuation is the low efficiency and functional instability due to the transformation thermal hysteresis and large temperature ranges during martensitic phase transformation. Numerous studies have been conducted in an effort to minimize the thermal hysteresis and transformation temperature range of SMAs through ternary and quaternary alloying of known binary alloy systems, such as NiTi, and considerable success has been achieved. However, and crucially, the alloys discovered so far have failed to maintain a narrow hysteresis under applied stress. In the present study, an AI-enabled materials discovery framework was successfully used to identify both SMA chemistries and the associated thermo-mechanical processing steps that result in narrow transformation hysteresis and transformation range under an applied stress. The major elements of the proposed workflow are described in detail and its materials-agnostic character makes it widely applicable to other alloy discovery challenges. Using this framework, and without relying on subsequent experimental exploratory analysis, an SMA composition, i.e. Ni32Ti47Cu21 (at. %), was predicted and confirmed to have the narrowest thermal hysteresis and transformation range under stress achieved thus far for a NiTi-based SMA. Furthermore, the alloy was shown to exhibit excellent cyclic stability and actuation strain. The methodology and the dataset introduced here can be extended to design novel SMAs with other target functions.

materials science, multidisciplinary,metallurgy & metallurgical engineering
Tuning Thermal Expansion by a Continuing Atomic Rearrangement Mechanism in a Multifunctional Titanium Alloy

D.L. Gong,H.L. Wang,E.G. Obbard,S.J. Li,R. Yang,Y.L. Hao

DOI: https://doi.org/10.2139/ssrn.3681173

2020-01-01

SSRN Electronic Journal

Abstract:As to multifunctional titanium alloys with high strength and low elastic modulus, thermal training is crucial to tune their thermal expansion from positive to negative, resulting in a novel linear expansion which is stable in a wide temperature range. Aided by the high-order Hooke’s law of elastic solids, a reversible atomic rearrangement mechanism was proposed to explain the above findings which are unexpected from shape memory alloys. To confirm this continuous mechanism, a Ti-Nb based alloy, which possesses a nanoscale spongy microstructure consisting of the interpenetrated Nb-rich and Nb-lean domains produced by spinodal decomposition, was used to trace the crystal structure change by in-situ high energy synchrotron x-ray diffraction analyses. By increasing exposure time, these well-known overlapped diffraction peaks of multifunctional alloys can be separated accurately. The calculated results demonstrate that, in the nanoscale Nb-lean domains, the crystal parameters vary linearly with temperature along the atomic pathway of the bcc-hcp transition. This linear relationship in a wide temperature range is unusual for the first-order martensitic transformation shape memory alloys but is common for the high-order spin transition Invar alloys. Furthermore, the alloy exhibits smooth DSC curves being free of the transformation-induced heat peaks observed in shape memory alloys. This is also consistent with the proposed mechanism that the reversible transition is of high order.
Temperature Induced Cubic-to-Tetragonal Transformations in Shape Memory Alloys Using a Phase-Field Model

R. Dhote,H. Gomez,R. Melnik,J. Zu

DOI: https://doi.org/10.1007/978-3-319-12307-3_26

2015-01-01

Abstract:Shape memory alloys (SMAs) exhibit hysteresis behaviors upon stress- and temperature-induced loadings. In this chapter, we focus on numerical simulations of microstructure evolution of cubic-to-tetragonal martensitic phase transformations in SMAs in 3D settings under the dynamic loading conditions. A phase-field (PF) model has been developed to capture coupled dynamic thermo-mechanical behavior of such SMA structures and the system of governing equations have been solved numerically using the isogeometric analysis. Temperature induced reverse and forward transformations have been applied to a cubic SMA specimen, starting with evolved accommodated martensitic microstructure. We have observed that during the forward transformation, the martensitic variants nucleate abruptly. The transient microstructures are aligned along $$\left[ 110 \right]$$ planes, which is in accordance with the crystallographic theory and experimental results.
Nonlinear Differential Equation Approach for the Two-Way Shape Memory Effects of One-Dimensional Shape Memory Alloy Structures

Linxiang Wang,Changquan Zhou,Changshui Feng

DOI: https://doi.org/10.1117/12.839833

2009-01-01

Abstract:In the current paper, a macroscopic differential model is constructed for the modeling of two-way shape memory effects in one-dimensional shape memory alloy (SMA) structures. The model is based on the phenomenological theory of thermoelastic phase transformations in SMAs. Hysteresis loops in both mechanical and thermal fields are treated as macroscopic illustrations of martensite transformations and martensite variant re-orientations. A non-convex free energy function is constructed such that each of its local equilibriums can be used to characterize one of the phases involved in the transformations. System states (strain) can be transformed upon external loadings (mechanical or thermal) from one stable equilibrium to another, thus the dynamics of phase transformations can be modeled by investigating the system state transformations. Governing equations for the transformation dynamics are formulated by employing the Lagrange's equation, and are expressed as nonlinear differential equations. Numerical examples of thermal and mechanical hysteresis loops associated with the transformations caused by thermal and mechanical loadings are presented. Two way shape memory effects and pseudo-elastic effects are successfully modeled.
Homogeneous Shear-Driven Reversible Α-to-α″ Phase Transformation and Superelasticity of Titanium Investigated by Molecular Dynamics Simulations

Yang Li,JiaHao Li,BaiXin Liu

DOI: https://doi.org/10.1016/j.actamat.2015.04.009

IF: 9.4

2015-01-01

Acta Materialia

Abstract:Shear is one of the most fundamental deformation modes in solid-state phase transitions and greatly influences the transformation process and mechanism. We employed molecular dynamics simulations to investigate the reversible α-to-α″ phase transitions driven by homogeneous shear at different temperatures from 200 to 500K. The simulation results clarified the phase transformation mechanism and its reverse transformation mechanism as well as the associated crystallographic orientation relationships. The transformation mechanism is analogous to the reorientation of α-Ti upon shock loading either experimentally or in a simulation, manifesting the validity of our simulation results. The reverse transformation mechanism indicates two transformation paths that vary with temperature, leading to two types of stress–strain curves upon unloading. The stress–strain relationships at different temperatures reveal superior superelasticity at low temperatures (200–300K) and inferior superelasticity at high temperatures (350–500K). The temperature effect on the shear-induced phase transition and superelasticity was also elucidated. The simulation results provide new insights into the stress-induced phase transition and superelasticity of Ti.
A high-entropy high-temperature shape memory alloy with large and complete superelastic recovery

Shaohui Li,Daoyong Cong,Zhen Chen,Shengwei Li,Chao Song,Yuxian Cao,Zhihua Nie,Yandong Wang

DOI: https://doi.org/10.1080/21663831.2021.1893233

2021-02-28

Materials Research Letters

Abstract:High-temperature shape memory alloys (HTSMAs) show enormous potential for applications as energy conversion devices, actuators and sensors in automotive, aerospace, and energy exploration industries, but they suffer from strength decrease and microstructural instability at elevated temperatures, rendering it difficult to achieve satisfactory high-temperature superelasticity. Here, a novel Ti20Hf15Zr15Cu25Ni25 high-entropy HTSMA exhibiting large superelasticity with a fully recoverable strain of 4.0% at temperatures up to 285°C is designed with the high-entropy alloy concept by employing the sluggish diffusion and severe lattice distortion effects to suppress thermal softening. This work illuminates the design of novel high-performance functional materials for high-temperature applications.GRAPHICAL IMPACT STATEMENTA novel high-entropy high-temperature shape memory alloy exhibiting large complete superelastic recovery is designed by employing the sluggish diffusion and severe lattice distortion in high-entropy alloys to suppress thermal softening.

materials science, multidisciplinary
Learning from superelasticity data to search for Ti-Ni alloys with large elastocaloric effect

Lei Ding,Yumei Zhou,Yangyang Xu,Pengfei Dang,Xiangdong Ding,Jun Sun,Turab Lookman,Dezhen Xue

DOI: https://doi.org/10.1016/j.actamat.2021.117200

IF: 9.4

2021-10-01

Acta Materialia

Abstract:In the present study, the reversible adiabatic temperature change (ΔTad) of shape memory alloys was shown to be proportional to the mechanical work released by the reverse martensitic transformation during unloading (ΔWu). As there exists a considerable amount of data (ΔWu) on superelastic stress-strain measurements in shape memory alloys, the proposed relationship allows us to predict ΔTad without caloric measurements. The estimated ΔTad from the ΔWu of different Ti-Ni alloys shows good linear relationship with the directly measured values. Moreover, following such a design criterion and by tuning of composition and thermo-mechanical treatment, a group of Ti-Ni binary shape memory alloys with a directly measured ΔTad larger than 35 K under tension were achieved. The large ΔTad and ΔWu can be ascribed to the grain refinement and the heterogeneous internal stress fields after the thermo-mechanical treatment, which have enhanced the critical stress of superelasticity and recoverability of martensitic transformation during unloading.

materials science, multidisciplinary,metallurgy & metallurgical engineering
Tailoring thermal expansion of shape memory alloys through designed reorientation deformation

Qiao Li,Yusuke Onuki,Qingping Sun

DOI: https://doi.org/10.1016/j.actamat.2021.117201

IF: 9.4

2021-10-01

Acta Materialia

Abstract:Manipulating macroscopic thermal expansion (TE) through microstructure engineering is emerging as a new research topic of shape memory alloys (SMAs). Here, we perform a modelling-and-experiment combined study to design and tune the coefficient of TE (CTE) of polycrystalline martensitic SMAs based on reorientation deformation. Using Landau thermodynamic theory of first-order phase transition, we prove that the martensite lattices of most SMAs possess intrinsic negative (positive) TE along the directions of transformation elongation (contraction). As a combined result of such intrinsic lattice-level TE and extrinsic reorientation-deformation texture, the overall CTEs of martensite polycrystals decrease (increase) with the amount of reorientation stretching (contraction). The deformation paths and strain magnitudes are designed to obtain zero TE in 17 types of bulk SMAs and are verified by the available experimental data. Furthermore, through designed cross-rolling on martensitic NiTi sheets, we obtain ultralow in-plane CTEs (+0.13 × 10−6 K−1 ∼ +1.4 × 10−6 K−1), which are smaller than the reported values of SMAs and are even smaller than the commercial FeNi Invar alloy (+2.0 × 10−6 K−1). Our work provides a theoretical base to design SMAs with desired CTEs for many applications.

materials science, multidisciplinary,metallurgy & metallurgical engineering

Association between glycemic control and birthweight with glycated albumin in Chinese women with gestational diabetes mellitus

A Phenomenological Model for Thermally-Induced Hysteresis in Polycrystalline Shape Memory Alloys with Internal Loops

Computational Martensite Re-Orientation in Shape Memory Alloys and the Related Hysteretic Dynamics

Experimentally correlating thermal hysteresis and phase compatibility in multifunctional Heusler alloys

Molecular dynamics simulations of ultralow hysteretic behavior in super-elastic shape memory alloys

Data-driven study of composition-dependent phase compatibility in NiTi shape memory alloys

Superelasticity over a wide temperature range in metastable β-Ti shape memory alloys

Thermomechanical modeling of nonlinear internal hysteresis due to incomplete phase transformation in pseudoelastic shape memory alloys

Hysteresis in Magnetic Shape Memory Composites: Modeling and Simulation

Efficient phase-field simulation for linear superelastic NiTi alloys under temperature gradients

The Role of Adaptive Martensite in Magnetic Shape Memory Alloys

Making metals linear super-elastic with ultralow modulus and nearly zero hysteresis

Large recoverable strain with suitable transition temperature in TiNb-based multicomponent shape memory alloys: First-principles calculations

Data-driven shape memory alloy discovery using Artificial Intelligence Materials Selection (AIMS) framework

Tuning Thermal Expansion by a Continuing Atomic Rearrangement Mechanism in a Multifunctional Titanium Alloy

Temperature Induced Cubic-to-Tetragonal Transformations in Shape Memory Alloys Using a Phase-Field Model

Nonlinear Differential Equation Approach for the Two-Way Shape Memory Effects of One-Dimensional Shape Memory Alloy Structures

Homogeneous Shear-Driven Reversible Α-to-α″ Phase Transformation and Superelasticity of Titanium Investigated by Molecular Dynamics Simulations

A high-entropy high-temperature shape memory alloy with large and complete superelastic recovery

Learning from superelasticity data to search for Ti-Ni alloys with large elastocaloric effect

Tailoring thermal expansion of shape memory alloys through designed reorientation deformation