Characterization of Physical and Chemical Properties of Multi-Source Metallurgical Dust and Analysis of Resource Utilization Pathways
Jiansong Zhang,Yuzhu Zhang,Yue Long,Chen Tian,Peipei Du,Qianqian Ren
DOI: https://doi.org/10.3390/met14121378
IF: 2.695
2024-12-03
Metals
Abstract:Steel metallurgical dust, characterized by a substantial output, minute particle size, and intricate composition, poses a considerable risk of environmental contamination while simultaneously embodying an exceptionally high potential for recycling. To achieve its resource utilization, chemical analysis, particle size analysis, X-ray diffraction (XRD), scanning electron microscopy (SEM), Mössbauer spectroscopy, and water leaching methods were employed to investigate the chemical compositions, particle size distributions, phase compositions, and microscopic morphologies of blast furnace bag dust, sintering dust, converter fine dust, and electric arc furnace dust from steel plants. The results indicate that the four types of dust have extremely fine particle sizes, with the main distribution range of particle size being less than 100 μm. The main constituent element is Fe (19–56%), and it also contains Zn (1.4–33.5%), Pb, K, C, and other valuable elements. Alkali metals in blast furnace bag dust and sintering machine head dust existed mainly in the form of chloride. The zinc phases in sintering machine head dust and converter fine dust were ZnFe2O4, and the zinc phases in blast furnace bag dust were ZnCl2 and ZnFe2O4. Zinc in electric furnace dust was composed of ZnO and ZnFe2O4, accounting for 70.31% and 23.12%, respectively. There are significant differences in the types and contents of valuable elements among various dusts, making it difficult to achieve full-scale recovery through a single process. In view of this, a process of "in-plant recycling of harmless dusts—collaborative treatment of harmful dusts" has been proposed. Based on the characteristics of metallurgical dusts, multiple processes are used for collaborative treatment (using hydrometallurgical and pyrometallurgical methods), which can not only directly recover iron resources from dusts within the plant, but also avoid the waste of valuable elements such as Zn, Pb, K, Na, etc. It is hoped that the above work can provide a reference for steel enterprises to achieve full-scale and high value-added treatment of metallurgical dusts.
materials science, multidisciplinary,metallurgy & metallurgical engineering