Abstract:This paper explores the optimization of Tungsten-Inert-Gas (TIG) welding process parameters for creating a hybrid structure of Aluminium 6061 and Stainless Steel 304 using a copper filler rod (ER-Cu). The Welding of these two materials has industrial relevance owing to its weight reduction capabilities and environmental benefits. However, Aluminium and Stainless-Steel have different melting points and thermal properties. Aluminium has twice coefficient of thermal expansion and six times coefficient of thermal conductance as compared to Stainless-Steel. This difference often results in residual stresses and brittle intermetallic compounds in the weld region. We have chosen the Welding Current, Welding Speed, and Gas Flow Rate as input parameters, and Ultimate Tensile Strength (UTS) and Micro-hardness as response parameters. We have employed the Response Surface Methodology (RSM) using a Box-Behnken design to evaluate the influence of input parameters on UTS and Micro-hardness. Furthermore, an Analysis of Variance (ANOVA) is conducted to determine the input parameters' significance on the response parameters. Our surface plots demonstrate that UTS improves with increased Welding Current and reduced Welding Speed. Simultaneously, Micro-hardness increases with elevated Welding Speed and decreased current, up to a specific limit. The peak value of UTS (79 MPa) was observed with a Current range of 85-90 A, Speed range of 95-100 mm/min, and Gas Flow Rate of 14.5-15 l/min. On the other hand, maximum Micro-hardness (260HV) was obtained with a Current range of 80-85 A, Speed range of 105-110 mm/min, and Gas Flow Rate of 14.5-15 l/min. This research contributes to improving the manufacturing process of hybrid structures, specifically by optimizing the advantages of both Aluminium and Stainless Steel while addressing the challenges that arise during their combination. The study's conclusions have major consequences for sectors looking to take advantage on the mutually beneficial characteristics of different metals in welding applications.

Empirical Relationships and Optimization for the GMA Welded Bead Profile Properties of AA6061 Alloy Utilizing Alternate Shielding Gas

Performance optimization and investigation of metal-cored filler wires for high-strength steel during gas metal arc welding

Study and effect of GTAW parameters on mechanical properties of aluminium dissimilar welded joints: optimization technique

Weldability Investigation and Optimization of Process Variables for TIG-Welded Aluminium Alloy (AA 8006)

Optimising the quality of several welds in a metal-inert gas arc joining of AA6082 and AA7075 using the grey-based Taguchi technique

Investigating parametric effects during TIG welding of dissimilar metals

Experimental Investigation of the Impact of GMAW Welding Parameters on the Mechanical Properties of AISI 316L/ER 316L using Quaternary Shielding Gas

Investigations and Optimization of Cold Metal Transfer-based WAAM Process Parameters for Fabrication of Inconel 718 Samples using Response Surface Methodology

Experimental Study And Optimization Of Submerged Arc Welding Parameters For Aisi 1055 Steel Using Response Surface Methodology

Some studies on optimization of process parameters for wire ARC additive manufacturing of Hastelloy C276 using GRA-GWO hybrid techniques

Tungsten inert gas welding of two aluminum alloys using filler rods containing scandium: the role of process parameters

Optimization of process parameters of friction stir welded joints of dissimilar aluminum alloy by response surface methodology

Multi-response Mathematical Modeling for Prediction of Weld Bead Geometry of AA6061-T6 Using Response Surface Methodology

Optimization of Tungsten Inert Gas Welding Parameters using Grey Relational Analysis for joining AA 6082 Pipes

Optimization of process parameters of aluminum alloy AA 2014-T6 friction stir welds by response surface methodology

Optimal weld bead profiles in the conduction mode LBW of thin Ti–6Al–4V alloy sheets

Mathematical modeling and optimization of friction stir welding process parameters for armor-grade aluminium alloy

Effect of Position of Robotic Gas Metal Arc Welding on Bead Quality and Multi-objective Optimization Through Gray Relational Analysis

Optimizing GMAW parameters to achieve high impact strength of the dissimilar weld joints using Taguchi approach

Parametric Optimization of Tig Welding of Aisi 316L Stainless Steel Using Response Surface Methodology

Achieving Optimal Weld Bead Geometry and Dilution Ratio in Tungsten Inert Gas–Metal Inert Gas Hybrid Welding through ANN-TLBO Algorithmic Optimization