Modeling of a heat capacity peak and an enthalpy jump for a paraffin-based phase-change material

Igor Medved',Anton Trnik,Libor Vozar

DOI: https://doi.org/10.48550/arXiv.1609.01853

2016-09-07

Abstract:Rubitherm RT 27 is a paraffin-based phase-change material (PCM) in which a change between a solid and liquid phase is used to store/release thermal energy. Its enthalpy and heat capacity, as measured in a quasistatic regime by adiabatic scanning calorimetry, has a single distinct jump and peak, respectively, at about 27.3 C. We present a microscopic development from which the jump and peak can be accurately fitted and that could be analogously applied even to other PCMs. It enables us to determine the baseline and excess part of the heat capacity and thus the latent heat associated with the phase change. It is shown to be about 84 % of the total enthalpy change that occurs within 5 C from the peak maximum position. The development is based on the observation that PCMs often have polycrystalline structure, being composed of many single-crystalline grains. The enthalpy and heat capacity measured in experiments are therefore interpreted as superpositions of many contributions that come from the individual grains.

Materials Science

What problem does this paper attempt to address?

The problem that this paper attempts to solve is: How to accurately describe the enthalpy jump and heat capacity peak phenomena that occur during the phase - change process of paraffin - based phase - change materials (PCMs) through a microscopic theoretical model. Specifically, the research aims to explain the significant jumps and peaks in enthalpy and heat capacity when the solid - liquid phase change occurs near 27.3°C for Rubitherm RT 27, a paraffin - based phase - change material.

### Research Background and Problem Description

Phase - change materials (PCMs) can store or release a large amount of thermal energy during the phase - change process with a very small temperature change. Therefore, these materials have important application values in fields such as solar energy storage, building heating and cooling, cold storage applications, data storage, and textile and clothing systems. However, the enthalpy jumps and heat capacity peaks observed in experiments usually have a finite width, which may be the result not only of non - equilibrium effects but also may occur under equilibrium conditions.

### Main Objectives of the Paper

1. **Establishment of a Microscopic Theoretical Model**: Develop a microscopic theoretical model that can explain and predict the phenomena of enthalpy jumps and heat capacity peaks during the phase - change process of phase - change materials.
2. **Influence of Polycrystalline Structure**: Consider that phase - change materials usually have a polycrystalline structure, which is composed of many single - crystal particles, and the size and surface effects of these particles will affect the width and position of the enthalpy jumps and heat capacity peaks.
3. **Fitting of Experimental Data**: Fit the experimental data through the theoretical model, verify the validity of the model, and determine key parameters such as the phase - change temperature and specific latent heat.

### Key Formulas

1. **Enthalpy Interpolation Formula**:
\[
h = h_1+(h_2 - h_1)\eta
\]
where \( h_1 \) and \( h_2 \) are the specific enthalpies of the two phases, and \( \eta \) is the normalized enthalpy interpolation function.

2. **Heat Capacity Formula**:
\[
c_p = c_{\text{exc}}+c_{\text{base}}
\]
where \( c_{\text{exc}} \) is the excess heat capacity and \( c_{\text{base}} \) is the baseline heat capacity.

3. **Specific Form of Excess Heat Capacity**:
\[
c_{\text{exc}} = c_0\gamma
\]
where \( c_0 \) is the maximum value of the excess heat capacity and \( \gamma \) is a dimensionless function that describes the shape of the peak.

4. **Average Interpolation Function and Peak Function**:
\[
J_{\text{av}}=\sum_G w_G J(x_G)
\]
\[
P_{\text{av}}=\sum_G w_G^2 P(x_G)
\]
where \( w_G \) is the mass fraction of the particles, and \( J(x_G) \) and \( P(x_G) \) are the enthalpy jump and heat capacity peak functions of the particles, respectively.

### Conclusion

By considering the polycrystalline structure and surface effects, the paper proposes a microscopic theoretical model that can well explain and predict the enthalpy jump and heat capacity peak phenomena during the phase - change process of phase - change materials. This model is not only applicable to Rubitherm RT 27 but can also be extended to the research of other phase - change materials.