Perovskite-perovskite tandem photovoltaics with optimized bandgaps

Giles E. Eperon,Tomas Leijtens,Kevin A. Bush,Rohit Prasanna,Thomas Green,Jacob Tse-Wei Wang,David P. McMeekin,George Volonakis,Rebecca L. Milot,Richard May,Axel Palmstrom,Daniel J. Slotcavage,Rebecca A. Belisle,Jay B. Patel,Elizabeth S. Parrott,Rebecca J. Sutton,Wen Ma,Farhad Moghadam,Bert Conings,Aslihan Babayigit,Hans-Gerd Boyen,Stacey Bent,Feliciano Giustino,Laura M. Herz,Michael B. Johnston,Michael D. McGehee,Henry J. Snaith
DOI: https://doi.org/10.1126/science.aaf9717
2017-01-21
Abstract:We demonstrate four and two-terminal perovskite-perovskite tandem solar cells with ideally matched bandgaps. We develop an infrared absorbing 1.2eV bandgap perovskite, $FA_{0.75}Cs_{0.25}Sn_{0.5}Pb_{0.5}I_3$, that can deliver 14.8 % efficiency. By combining this material with a wider bandgap $FA_{0.83}Cs_{0.17}Pb(I_{0.5}Br_{0.5})_3$ material, we reach monolithic two terminal tandem efficiencies of 17.0 % with over 1.65 volts open-circuit voltage. We also make mechanically stacked four terminal tandem cells and obtain 20.3 % efficiency. Crucially, we find that our infrared absorbing perovskite cells exhibit excellent thermal and atmospheric stability, unprecedented for Sn based perovskites. This device architecture and materials set will enable 'all perovskite' thin film solar cells to reach the highest efficiencies in the long term at the lowest costs.
Materials Science
What problem does this paper attempt to address?
The key problem that this paper attempts to solve is to develop efficient all - perovskite tandem solar cells, especially to optimize their band gaps in order to achieve higher photoelectric conversion efficiency and better stability. Specifically, the author is committed to solving the following problems: 1. **Band - gap Optimization**: - Develop perovskite materials with ideal band gaps, especially infrared - absorbing materials, to match the requirements of different layers in tandem cells. - Specifically, the author has developed a perovskite material \( \text{FA}_{0.75}\text{Cs}_{0.25}\text{Sn}_{0.5}\text{Pb}_{0.5}\text{I}_3 \) with a band gap of 1.2 eV, and a \( \text{FA}_{0.83}\text{Cs}_{0.17}\text{Pb}(\text{I}_{0.5}\text{Br}_{0.5})_3 \) material with a band gap of 1.8 eV. 2. **Improving Efficiency**: - By combining the above two materials, an efficient tandem structure has been achieved. For two - terminal (2T) tandem cells, an efficiency of 17.0% has been reached; for four - terminal (4T) tandem cells, an efficiency of 20.3% has been reached. - These efficiencies are significantly higher than those of single - junction perovskite solar cells, and are close to or even exceed the highest records of other low - cost semiconductor materials (such as small organic molecules, amorphous silicon, and microcrystalline silicon). 3. **Enhancing Stability**: - In particular, the thermal stability and atmospheric stability of tin - based perovskite materials have been studied. Previous tin - based perovskite materials were extremely unstable in air, but the author found that the \( \text{FA}_{0.75}\text{Cs}_{0.25}\text{Sn}_{0.5}\text{Pb}_{0.5}\text{I}_3 \) material they developed exhibits excellent stability, which is an unprecedented breakthrough. 4. **Reducing Manufacturing Costs**: - All - perovskite tandem cells are expected to achieve lower manufacturing costs in the future because they can adopt low - temperature solution processing techniques, thus avoiding the expensive equipment and complex processes required by traditional high - temperature processing methods. In summary, this paper has successfully improved the efficiency and stability of all - perovskite tandem solar cells by developing new perovskite materials and optimizing their band gaps, laying the foundation for the future development of low - cost and high - efficiency solar cells.