Abstract:Due to the excellent thermoelectric performance, bismuth telluride (Bi2Te3) compounds are highly promising for the thermoelectric conversion in the room temperature range. However, the inferior thermoelectric performance of the n-type leg severely restricts the applications of Bi2Te3-based thermoelectric couples. Herein, n-type Bi2Te2.7Se0.3 (BTS)-based thermoelectric materials incorporated with nanosized Y2O3 (0.5–3 wt %) are prepared and their thermoelectric properties are systematically studied. The dramatically improved thermoelectric performance is ascribed to the realization of a multiscale feature of Y2O3 nanoparticle (NP)-induced interfacial decorations distributed along grain boundaries, which creates massive BTS/Y2O3 interfaces for the manipulation of carrier and phonon transport properties. The geometric phase analysis is employed to further confirm the condition of local strain in the BTS composite incorporated with Y2O3 NPs. Due to the presence of heterointerfaces and high density of dislocations in BTS matrices, the minimum lattice thermal conductivity (κl) of the nanocomposites (NCs) is dramatically suppressed from 0.76 to 0.37 W m–1 K–1. With the incorporation of 3 wt % Y2O3 NPs, the Vickers hardness of the BTS/Y2O3 NC is increased by about 32%. Overall, the BTS + 1.5 wt % Y2O3 NC maintains excellent thermoelectric properties (ZTave = 1.1) in the whole operative temperature range (300–500 K). The present strategy of implementing high-density heterogeneous interfaces by Y2O3 NP addition offers an applicable pathway for fabricating high-performance thermoelectric materials with both optimized thermoelectric properties and mechanical properties.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c12722.Orientation factor F calculation; density (ρ), Seebeck coefficient (S), carrier concentration (n), carrier mobility (μ), and scattering parameter (γ) of BTS + x wt % Y2O3 and nanocomposite bulk samples at 300 K (Table S1); statistical distribution of grain size; temperature dependence of the weighted mobility (μw); electron thermal conductivity (κe); and calculation of lattice thermal conductivity based on the Callaway model (PDF)This article has not yet been cited by other publications.

Ultralow Thermal Conductivity and High Thermoelectric Performance of N-type Bi 2 Te 2.7 Se 0.3 -Based Composites Incorporated with GaAs Nanoinclusions

Realize High Thermoelectric Properties in n-Type Bi 2 Te 2.7 Se 0.3 /Y 2 O 3 Nanocomposites by Constructing Heterointerfaces

Enhanced thermoelectric performance and mechanical strength of n-type BiTeSe materials produced via a composite strategy

Enhancing Thermoelectric Performance of n-Type Bi2Te2.7Se0.3 through Incorporation of Amorphous Si3N4 Nanoparticles

Enhancing thermoelectric performance of n-type Bi2Te2.7Se0.3 through the incorporation of MnSb2Se4 nanoinclusions

Enhanced power factor and thermoelectric performance for n-type Bi2Te2.7Se0.3 based composites incorporated with 3D topological insulator nanoinclusions

Role of grain alignment and oxide impurity in thermoelectric properties of textured n-type Bi–Te–Se alloy

Employing multi-functional SnSe inclusions to boost the thermoelectric performance of the shear-exfoliated Bi<sub>2</sub>Te<sub>2.7</sub>Se<sub>0.3</sub>

Employing multi-functional SnSe inclusions to boost the thermoelectric performance of the shear-exfoliated Bi2Te2.7Se0.3

Enhanced thermoelectric performance of N-type Bi2Te2.7Se0.3-based materials by superparamagnetic Fe3O4 nanoparticles

Achieving High Thermoelectric Performance in p-Type BST/PbSe Nanocomposites through the Scattering Engineering Strategy

Achieving High Thermoelectric Performance by Introducing 3D Atomically Thin Conductive Framework in Porous Bi 2 Te 2.7 Se 0.3 ‐Carbon Nanotube Hybrids

Achieving High Thermoelectric Performance by Introducing 3D Atomically Thin Conductive Framework in Porous Bi2Te2.7Se0.3‐Carbon Nanotube Hybrids

Thermoelectric Performance Enhancement in N -Type Bi 2 (tese) 3 Alloys Owing to Nanoscale Inhomogeneity Combined with a Spark Plasma-Textured Microstructure

Enhanced Thermoelectric Properties of p-Type Bi 0.48 Sb 1.52 Te 3 /Sb 2 Te 3 Composite

Optimized thermoelectric performance of N‐type Bi2Te2.7Se0.3 commercial materials by dispersing CuS nanoparticles

Isotropic Thermoelectric Performance of Layer-Structured n-Type Bi 2 Te 2.7 Se 0.3 by Cu Doping

Enhanced thermoelectric performance of Bi0.3Sb1.7Te3 based alloys by dispersing TiC ceramic nanoparticles

High Performance Thermoelectric Power of Bi 0.5 Sb 1.5 Te 3 Through Synergistic Cu 2 GeSe 3 and Se Incorporations

Tunable Electrical Conductivity and Simultaneously Enhanced Thermoelectric and Mechanical Properties in n-type Bi<sub>2</sub>Te<sub>3</sub>

Simultaneous Enhancement of the Thermoelectric and Mechanical Performance in One-Step Sintered n-Type Bi2Te3-Based Alloys via a Facile MgB2 Doping Strategy