Abstract:Dielectric elastomers are soft and perfect insulator polymers able to produce large strains with high energy density under the effect of applied high voltage. However, their use in practical applications is hindered by the need for high voltage to actuate. Also, they need prestretching between rigid frames to produce out-of-plane shape changes, which may reduce their lifetime. Here, we synthesized a set of elastomers with high permittivity (from 20 to reach 60 at 103 Hz), controllable thermal properties (Tg vary from −15 to −50 °C), and good mechanical properties (Young's modulus values between 0.48 and 0.2 MPa at 20% strain). Due to the high permittivity, an actuator made of the material was able to respond to a low voltage of 700 V and produce a 6.5% area strain for more than 10 000 cycles. Moreover, the elastomers were found to produce giant free-end bending displacements with prespecified bending direction (bend to the side of the positive electrode) under a low electric field, which we called programmable dielectric elastomers (PDE). Besides the aforementioned characteristics and performance, the formulated elastomers are suitable for UV-based three-dimensional (3D) printing. The printability of the elastomers allows fabricating programmable complex geometries to produce high deformations under relatively low electric fields.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaelm.0c00837?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaelm.0c00837</a>.Printing parameters for successfully printed parts from different elastomer formulations of 100 μm layer thickness using an Asiga printer (Table S1); chemical formulation and summary of mechanical properties (Table S2); FTIR results (Figure S1); Curing depth versus exposure time for different light stabilizers amounts and curing depth versus exposure time for different amounts of photoinitiator (Figure S2); FTIR results (Figure S3); TGA results, DSC results, and gel extraction efficiency results (Figure S4); electrochemical results (Figure S5); response of the investigated elastomers during and after charging cycle (Figure S6); Set of 30 samples printed one patch for testing the bending direction and simple test rig to randomly test the printed samples (Figure S7); Yeoh's model fitting of experimental data (Figure S8); model and assumptions proposed for modeling electromechanical behavior of the elastomers and distribution of Maxwell's stresses in the actuated area (Figure S9); and simulations results showing the dependence of Z bending displacement on applied voltage (Figure S10) (<a class="ext-link" href="/doi/suppl/10.1021/acsaelm.0c00837/suppl_file/el0c00837_si_001.pdf">PDF</a>)Elastic stretchability of printed piece of elastomer and elastic cyclic compression of a complex lattice (<a class="ext-link" href="/doi/suppl/10.1021/acsaelm.0c00837/suppl_file/el0c00837_si_002.mp4">MP4</a>)Breakdown strength phenomenon of elastomer (<a class="ext-link" href="/doi/suppl/10.1021/acsaelm.0c00837/suppl_file/el0c00837_si_003.mp4">MP4</a>)Demonstration of the actuation performance of elastomer (<a class="ext-link" href="/doi/suppl/10.1021/acsaelm.0c00837/suppl_file/el0c00837_si_004.mp4">MP4</a>)Proof-of-concept applications for soft gripper application (<a class="ext-link" href="/doi/suppl/10.1021/acsaelm.0c00837/suppl_file/el0c00837_si_005.mp4">MP4</a>)Stability of membrane for 10 000 s under 700 V at 0.5 Hz (<a class="ext-link" href="/doi/suppl/10.1021/acsaelm.0c00837/suppl_file/el0c00837_si_006.mp4">MP4</a>)This article has not yet been cited by other publications.

A Solid-State Dielectric Elastomer Switch for Soft Logic

Significantly improved electromechanical performance of dielectric elastomers via alkyl side-chain engineering

Dielectric elastomer switches for smart artificial muscles

Stretchable silicon electronics and their integration with rubber, plastic, paper, vinyl, leather and fabric substrates

Soft Elastomers with Ionic Liquid‐Filled Cavities As Strain Isolating Substrates for Wearable Electronics

Soft elastomeric composite materials with skin-inspired mechanical properties for stretchable electronic circuits.

A Miniature DC Switch Based on Liquid Metal Droplets

A Self‐Healing Solid‐State Ion‐Conductive Elastomer with High Mechanical Robustness and High Conductivity for Soft Ionotronics

A highly conductive, robust, self-healable, and thermally responsive liquid metal-based hydrogel for reversible electrical switches

A low-voltage high-speed electronic switch based on piezoelectric transduction

A Planar Single-Actuator Bi-Stable Mechanical/Electrical Switch

Programmable, UV-Printable Dielectric Elastomers Actuate at Low Voltage without Prestretch and Supporting Frames

Novel Materials Solutions And Simulations For Nanoelectromechanical Switches

A Liquid‐Metal–Elastomer Nanocomposite for Stretchable Dielectric Materials

Dual-gate Silicon Carbide (sic) Lateral Nanoelectromechanical Switches

Stretchable and Twistable Resistive Switching Memory with Information Storage and Computing Functionalities

Sub-0.3 volt amorphous metal WNx based NEMS switch with 8 trillion cycles

Power-Level Electrical Switch Enabled by a Liquid-Metal Bridge

Robust Silicon Carbide (sic) Nanoelectromechanical Switches with Long Cycles in Ambient and High Temperature Conditions

Dynamic Disulfide Bonds Fabricated Multifunctional Liquid-free Elastomer for Recyclable Soft Electronics

An autonomously electrically self-healing liquid metal–elastomer composite for robust soft-matter robotics and electronics