Abstract:Lithium-ion batteries are extensively used in electric vehicles because of their high energy density and long service life. Designing a battery thermal management system (BTMS) that prevents thermal runaway propagation in the event of abusive accidents is crucial. The goal of this study is to design a novel hybrid BTMS with both active liquid cooling and passive cooling for preventing thermal runaway propagation in the battery module. A numerical model for a battery module (16 cylindrical 18650 cells) was developed in COMSOL multi-physics software to examine the thermal runaway propagation caused by a single cell. Copper foam and expanded graphite-paraffin (EG-PCM) composite material were used for passive cooling. In addition to the thermal runaway scenario, the thermal behaviors of the battery module with the hybrid BTMS were also evaluated under the 3C discharging and driving cycle circumstances. A conventional BTMS with natural air cooling is chosen as the baseline. The findings reveal that the proposed hybrid BTMS, which uses EG-PCM with a melting temperature of 52 °C and thermal diffusivity of 9.68 mm2/s and copper foam with a porosity of 0.7-0.9, is capable of limiting the maximum cell temperature below the thermal safety threshold (80 °C) to prevent thermal runaway propagation. Under the NEDC load cycle, the battery module can be maintained within an optimal working temperature range by passive cooling only. By applying active liquid cooling with a flow rate of 0.3 m/s for BTMS, the average temperature reduction of the battery module at a 3C discharging rate can be up to 72.5% and 52.7% compared to passive cooling with copper foam and EG-PCM, respectively. The study highlights that the combination of active liquid cooling and appropriate passive cooling is an efficient thermal management solution for Li-ion battery applications in electric vehicles, notably in the consideration of thermal safety.

Rationally coupling thermal tolerance, thermal conductance, and overheating-response in a separator for safe batteries

Numerical Study on the Use of Emergency Cooling During the Process of Lithium-Ion Battery Thermal Runaway

Boosting Battery Safety by Mitigating Thermal‐Induced Crosstalk with a Bi‐Continuous Separator

Boosting Battery Safety by Mitigating Thermal‐Induced Crosstalk with a Bi‐Continuous Separator (Adv. Energy Mater. 44/2022)

Thermal‐Stable Separators: Design Principles and Strategies towards Safe Lithium‐Ion Battery Operations

Fundamental Insights into Battery Thermal Management and Safety

Synergistic Effect of Insulation and Liquid Cooling on Mitigating the Thermal Runaway Propagation in Lithium-Ion Battery Module

High-Safety Lithium-Ion Battery Separator with Adjustable Temperature Function Inspired by the Sugar Gourd Structure

Efficient thermal management of lithium-sulfur batteries by highly thermally conductive LBL-assembled composite separators

Thermal safety and thermal management of batteries

Electrochemical-thermal coupled modelling and multi-measure prevention strategy for Li-ion battery thermal runaway

Fast thermal responsive separators toward long-life and safe lithium metal batteries

Pry into the Thermal and Mechanical Properties of Electrolyte-Soaked Separators

Integrating an In-Plane Electron-Conductive Separator to Enable Short-Circuit Warning in Lithium-Sulfur Batteries

An Experimental Study on Preventing Thermal Runaway Propagation in Lithium-Ion Battery Module Using Aerogel and Liquid Cooling Plate Together

Thermal Runaway and Thermal Management of Lithium-Ion Power Batteries in New Energy Vehicles

A Critical Review on Materials and Fabrications of Thermally Stable Separators for Lithium‐Ion Batteries

A Novel Hybrid Battery Thermal Management System for Prevention of Thermal Runaway Propagation

Thermal-triggered fire-extinguishing separators by phase change materials for high-safety lithium-ion batteries

Safer Lithium‐Ion Batteries from the Separator Aspect: Development and Future Perspectives