Abstract:Lithium-ion batteries are extensively used in electric vehicles because of their high energy density and long service life. Designing a battery thermal management system (BTMS) that prevents thermal runaway propagation in the event of abusive accidents is crucial. The goal of this study is to design a novel hybrid BTMS with both active liquid cooling and passive cooling for preventing thermal runaway propagation in the battery module. A numerical model for a battery module (16 cylindrical 18650 cells) was developed in COMSOL multi-physics software to examine the thermal runaway propagation caused by a single cell. Copper foam and expanded graphite-paraffin (EG-PCM) composite material were used for passive cooling. In addition to the thermal runaway scenario, the thermal behaviors of the battery module with the hybrid BTMS were also evaluated under the 3C discharging and driving cycle circumstances. A conventional BTMS with natural air cooling is chosen as the baseline. The findings reveal that the proposed hybrid BTMS, which uses EG-PCM with a melting temperature of 52 °C and thermal diffusivity of 9.68 mm2/s and copper foam with a porosity of 0.7-0.9, is capable of limiting the maximum cell temperature below the thermal safety threshold (80 °C) to prevent thermal runaway propagation. Under the NEDC load cycle, the battery module can be maintained within an optimal working temperature range by passive cooling only. By applying active liquid cooling with a flow rate of 0.3 m/s for BTMS, the average temperature reduction of the battery module at a 3C discharging rate can be up to 72.5% and 52.7% compared to passive cooling with copper foam and EG-PCM, respectively. The study highlights that the combination of active liquid cooling and appropriate passive cooling is an efficient thermal management solution for Li-ion battery applications in electric vehicles, notably in the consideration of thermal safety.

An Experimental Study on Preventing Thermal Runaway Propagation in Lithium-Ion Battery Module Using Aerogel and Liquid Cooling Plate Together

Synergistic Effect of Insulation and Liquid Cooling on Mitigating the Thermal Runaway Propagation in Lithium-Ion Battery Module

Mitigating Thermal Runaway Propagation in High Specific Energy Lithium-ion Battery Modules through Nanofiber Aerogel Composite Material

Experimentally exploring prevention of thermal runaway propagation of large-format prismatic lithium-ion battery module

Experimental Study on the Alleviation of Thermal Runaway Propagation from an Overcharged Lithium-Ion Battery Module Using Different Thermal Insulation Layers

Numerical Study on Thermal Runaway of Lithium-Ion Batteries with Liquid Cooling

Inhibition Effect of Different Interstitial Materials on Thermal Runaway Propagation in the Cylindrical Lithium-Ion Battery Module

Experimentally exploring thermal runaway propagation and prevention in the prismatic lithium-ion battery with different connections

A Novel Hybrid Battery Thermal Management System for Prevention of Thermal Runaway Propagation

Experimental and simulation investigation of thermal runaway propagation in lithium-ion battery pack systems

Thermal Management for Battery Module with Liquid-Cooled Shell Structure under High Charge/Discharge Rates and Thermal Runaway Conditions

Electrochemical-thermal coupled modelling and multi-measure prevention strategy for Li-ion battery thermal runaway

Inhibition of Thermal Runaway Propagation in Lithium-Ion Battery Pack by Minichannel Cold Plates and Insulation Layers

Investigation for the Effect of Side Plates on Thermal Runaway Propagation Characteristics in Battery Modules

Alleviation of thermal runaway propagation in thermal management modules using aerogel felt coupled with flame-retarded phase change material

Preventing effect of different interstitial materials on thermal runaway propagation of large-format lithium iron phosphate battery module

Prevention and suppression effects of phase change material on thermal runaway in batteries

Multi-objective Optimization of Side Plates in a Large Format Battery Module to Mitigate Thermal Runaway Propagation

Experimental study of thermal runaway propagation suppression of lithium-ion battery module in electric vehicle power packs

Effect of composite cooling strategy including phase change material and liquid cooling on the thermal safety performance of a lithium-ion battery pack under thermal runaway propagation