Abstract:Reasonable design and feasible preparation of low-cost and stable oxygen reduction reaction (ORR) catalysts with excellent performance play a key role in the development of fuel cells and metal-air batteries. A 3D porous superimposed nanosheet catalyst composed of metal manganese covered with MnO2 nanofilms (P-NS-MnO2@Mn) was designed and synthesized by rotating disk electrodes (RDEs) through one-step electrodeposition. The catalyst contains no carbon material. Therefore, the oxidation and corrosion of the carbon material during use can be avoided, resulting in excellent stability. The structural and composition characterizations indicate that the nanosheets with sharp edges exist on the surface of the wall surrounding the macropore (diameter ∼ 5.07 μm) and they connect tightly. Both the nanosheets and the wall of the macropore are composed of metal manganese covered completely with MnO2 film with a thickness of less than 5 nm. The half-wave potential of the synthesized P-NS-MnO2@Mn catalyst is 0.86 V. Besides, the catalyst exhibits good stability with almost no decay after a 30 h chronoamperometric test. Finite element analysis (FEA) simulation reveals the high local electric field intensity surrounding the sharp edges of the nanosheets. Density functional theory (DFT) calculations reveal that the novel nanosheet structure composed of MnO2 nanofilms covered on the surface of the Mn matrix accelerates the electronic transfer of the MnO2 nanofilms during the ORR process. The high local electric field intensity near the sharp edge of the nanosheets effectively promotes the orbital hybridization and strengthens the adsorbing Mn-O bond between the active site Mn in the nanosheets and the intermediate OOH* during the ORR process. This study provides a new strategy for preparing transition metal oxide catalysts and a novel idea about the key factors affecting the catalytic activity of transition metal oxides for the ORR.

Manganese oxide nano flakes onto simultaneously activated defective CNTs for the creation of CNTs-graphene supported oxygen reduction composite catalysts applied in air fuel cell

Transition Metal (Fe, Zn, Co, and Ni) Single-Atom Catalysts Anchored on N,S-Codoped Hybrid Nanocarbons for Oxygen Reduction Reaction

Synergistic effect of Mn3+ and oxygen vacancy on the bifunctional oxygen electrocatalytic performance of MnOX/CNTs composites

Three-dimensional Composite Catalysts for Al-O2 Batteries Composed of CoMn2O4 Nanoneedles Supported on Nitrogen-Doped Carbon Nanotubes/Graphene.

Manganese–polypyrrole–carbon Nanotube, a New Oxygen Reduction Catalyst for Air-Cathode Microbial Fuel Cells

Restructured Fe−Mn Alloys Encapsulated by N‐doped Carbon Nanotube Catalysts Derived from Bimetallic MOF for Enhanced Oxygen Reduction Reaction

Mn atomic clusters and Fe nanoparticles in-situ confined nitrogen carbon nanotubes for efficient and durable ORR electrocatalysts in both alkaline and acidic media

Transition Metal Oxides/Carbides @ Carbon Nanotube Composites as Multifunctional Electrocatalysts for Challenging Oxidations and Reductions.

Highly Active Carbon/alpha-MnO2 Hybrid Oxygen Reduction Reaction Electrocatalysts

Carbon nanotube supported MnO₂ catalysts for oxygen reduction reaction and their applications in microbial fuel cells

Synergistic effects of carbon nanotubes on α-MnO 2 electrocatalysts for improved oxygen reduction in alkaline fuel cells

Highly Active Carbon/α‐MnO2 Hybrid Oxygen Reduction Reaction Electrocatalysts

Microwave synthesis and properties of MnO2/CNTs non-precious metal catalyst for oxygen reduction reaction in alkaline solution

Carbon Nanotubes Loaded on Graphene Microfolds As Efficient Bifunctional Electrocatalysts for the Oxygen Reduction and Oxygen Evolution Reactions

Dual-MOFs-Derived Fe and Mn Species Anchored on Bamboo-like Carbon Nanotubes for Efficient Oxygen Reduction as Electrocatalysts

Xerogel-Derived Manganese Oxide/N-Doped Carbon as a Non-Precious Metal-Based Oxygen Reduction Reaction Catalyst in Microbial Fuel Cells for Energy Conversion Applications

Ionothermal synthesis of N-doped carbon supported CoMn2O4 nanoparticles as ORR catalyst in direct glucose alkaline fuel cell

Nanoconfined Nitrogen-Doped Carbon-Coated MnO Nanoparticles in Graphene Enabling High Performance for Lithium-Ion Batteries and Oxygen Reduction Reaction

Carbon-Free, Binder-Free MnO2@Mn Catalyst for Oxygen Reduction Reaction.

MnO synergizes with FeC–FeN in carbon nanofibers to boost oxygen reduction for zinc–air batteries

Nanoporous nitrogen doped carbon modified graphene as electrocatalyst for oxygen reduction reaction