Abstract:The Air-cooled and open cathode proton exchange fuel cell (PEMFC) offers particular advantages in terms of complexity and weight reduction. Therefore, it seems very attractive to support the aviation industry in their de‐carbonisation process. Major challenges in terms of operational stability and reliability hinders this technology to be used in commercial applications. Therefore, this study thoroughly examines the conditioning and optimization of open cathode PEMFC stacks, drawing insights from experimental findings. Key areas of focus include the enduring impact of pre-humidification, the quantification of efficiency enhancements through reconditioning via oxygen starvation, and the refinement of Electrochemical Impedance Spectroscopy (EIS) data analysis under non-stationary conditions. The pre-humidification enhances stack performance by improving cell voltages from 40.09 V to 41.37 V at 30 A, increasing membrane humidity and improving efficiency. Furthermore, the residual water in the stack also functions as evaporative cooling and can assist in limiting the operating temperature of the stack during system start up. However, it is demonstrated that excessive soaking with water leads to severe flooding phenomena at the beginning of operation. A reconditioning period of 100 s through oxygen starvation induces a notable increase in stack voltage, from 41.37 V to 47.79 V at 35 A, which decreases to 43.56 V after 10 min of operation. This corresponds to an average increase in electric energy provision of about 6.2% at constant hydrogen consumption, attributed to PtOx reduction and increased water production. Despite limitations outside the medium frequency range (approximately 10 Hz – 15 kHz) for non-stationary conditions, EIS aids in understanding of the stack behaviour and supports the interpretation of current and voltage results. A novel evaluation method enables the quantitative description of the condition using EIS data. This data reveals a considerable drop (on average about 21,5% for the 10 A point and about 27,4% for the 30 A point) in charge transfer resistances of the fuel cell from initial operation to measurements after overnight soaking and the first series of oxygen starvation recovery.

A Linear Instrument for In Situ Stack-Level Fuel Cell Characterization Using Periodical EIS Perturbations

Performance Analysis of Flat-chip Solid Oxide Fuel Cells with Discrete Interconnector Designs

Experimental Study on High-Efficiency Microtubular Solid Oxide Fuel Cell Stacks Using Various Fuels

An Electrical Circuit for Performance Analysis of Polymer Electrolyte Fuel Cell Stacks Using Electrochemical Impedance Spectroscopy

Modeling and Simulation of Parallel Dc/Dc Converters for Online Ac Impedance Estimation of Pem Fuel Cell Stack

Real-Time Impedance Detection for PEM Fuel Cell Based on TAB Converter Voltage Perturbation

Implementation and optimization of perturbation currents for vehicular proton exchange membrane fuel cells online electrochemical impedance spectroscopy measurements

Experimental Investigations of Cell Resistances to Characterize the Concentration Polarization Behavior of 10 ×10 Cm2 Solid Oxide Fuel Cells

Non-Invasive Measurement of Impedance Spectra Distribution in Polymer Electrolyte Fuel Cells

Direct Two-Dimensional Electrochemical Impedance Spectra Simulation for Solid Oxide Fuel Cell

Novel electrochemical and thermodynamic conditioning approaches and their evaluation for open cathode PEM-FC stacks

A new approach to online AC impedance measurement at high frequency of PEM fuel cell stack

Performance Degradation Analysis of Solid Oxide Fuel Cells Using Dynamic Electrochemical Impedance Spectroscopy

Micro-current Excitation for Efficient Diagnosis of Membrane Electrode Assemblies in Fuel Cell Stacks: Error Analysis and Method Optimization

Understanding performance difference in the scale-up of flat-chip solid oxide fuel cell: An experimental and numerical study

Application of Electrochemical Impedance Spectroscopy for Fuel Cell Characterization: PEFC and Oxygen Reduction Reaction in Alkaline Solution

Impedance Characteristics of Cell-to-Cell Inconsistency of Polymer Electrolyte Membrane Fuel Cells

In-situ Characterization of Gas Distribution in Proton Exchange Membrane Fuel Cell Stacks

Rapid Synchronous State-of-health Diagnosis of Membrane Electrode Assemblies in Fuel Cell Stacks

A General Approach for Electrochemical Impedance Spectroscopy Simulation using Transient Mechanistic SOFC Model

Low-frequency Experimental Method for Measuring the Electric Double-Layer Capacitances of Multi-Cell Electrolysis Stacks Based on Equivalent Circuit Model