Abstract:Many applications, such as photovoltaic systems, uninterruptible power supplies, and automobile headlamps, need a high step-up DC–DC converter without isolation. The conventional boost converter has the advantages of simple topology and easy control. However, it has some shortcomings, such as insufficient step-up voltage ratio and poor efficiency when operating at large duty-cycle conditions. One of the popular topologies used to overcome these problems is the coupled-inductor boost converter. It utilizes the turn ratio of the coupled inductor to realize a higher step-up voltage ratio. The drawback is that the leakage inductance of the coupled inductor causes a huge voltage spike when the power switches are turned off. Moreover, because coupled inductors are characterized by their large volume and high profile, a conventional coupled-inductor boost converter is unsuited for photovoltaic systems, such as the solar microinverter. This study proposes a novel high-step-up boost converter to solve these problems. This proposed converter uses dual coupled inductors instead of the conventional coupled-inductor boost converter. The secondary side of the coupled inductor is connected in series to increase the step-up voltage ratio. The proposed converter utilizes active clamping to achieve zero-voltage switching (ZVS) for suppressing voltage spike and improving conversion efficiency. In addition, low-profile designs can be fulfilled easily for solar microinverters. The proposed converter and its control method are introduced. The operation principle, circuit characteristics, and circuit analysis are presented. A prototype converter with 300 W output power 25–40 VDC input voltage and 200 VDC output voltage was tested. All functions, including high step-up voltage ratio, ZVS, and active clamping, were achieved, and the highest efficiency was around at 94.7%.

A universal ZVS design for a family of quadratic boost converters

Improved High Step-Up Dc-Dc Converter Based on Active Clamp Coupled Inductor with Voltage Double Cells

Family of Enhanced ZCS Single-Stage Single-Phase Isolated AC–DC Converter for High-Power High-Voltage DC Supply

Applying Diode-Capacitor Voltage Multiplier to Coupled-Inductor Boost Converter for Novel DC-DC Converter with High Voltage Gain and Low Voltage Stress

A New ZVCS Resonant Voltage-Fed Push-Pull Converter for Vehicle Inverter Application

Analysis and Design of a High Voltage‐gain Quasi‐z‐source DC–DC Converter

A Universal ZVS Circuit Design Method for a Family of Interleaved High Step-Up Converters With Least Device Requirement

High Frequency Multicell Cascaded Quasi-Square-Wave Boost Converter

A Universal ZVT Design for a Family of Multiphase Interleaved High Step-Up Converters With Minimized Voltage Stress and Wide Operating Range

A New Modified Quadratic Boost Converter with High Voltage Gain

An ultra-high gain boost converter with low switching stress for integrated multi-energy storage systems

Interleaved High Step-Up Converter with Coupled Inductor and Blocking Capacitor

A Family of Transformer-Less Single-Switch Dual-Inductor High Voltage Gain Boost Converters with Reduced Voltage and Current Stresses

Dual-Coupled-Inductor-Based High-Step-Up Boost Converter with Active-Clamping and Zero-Voltage Switching

ZVS Three‐phase Current‐fed Push–pull Converter Employing a Simple Active‐clamp Circuit for Voltage Step‐up Applications

A Single-Switch Trans-Inverse High Step-Up Semi-Quadratic DC-DC Converter Based on Three-Winding Coupled-Inductor

Synchronous Dual-Switch Ultrahigh Step-up DC-DC Converter Based on Coupled Inductor and Voltage Multiplier for Photovoltaic Systems

A Single Switch Quadratic Boost High Step Up DC–DC Converter

A Dual-Active-Clamp Quasi-Resonant Isolated Boost Converter for PV Integration to Medium-Voltage DC Grids

Analysis, Design, and Experimentation of an Isolated Zvt Boost Converter with Coupled Inductors

An Interleaved Zero-Voltage Zero-Current Switching High Step-Up DC-DC Converter