Abstract:Objective.This work presents a method for enhanced detection, imaging, and measurement of the thermal neutron flux.Approach. Measurements were performed in a water tank, while the detector is positioned out-of-field of a 20 MeV ultra-high pulse dose rate electron beam. A semiconductor pixel detector Timepix3 with a silicon sensor partially covered by a6LiF neutron converter was used to measure the flux, spatial, and time characteristics of the neutron field. To provide absolute measurements of thermal neutron flux, the detection efficiency calibration of the detectors was performed in a reference thermal neutron field. Neutron signals are recognized and discriminated against other particles such as gamma rays and x-rays. This is achieved by the resolving power of the pixel detector using machine learning algorithms and high-resolution pattern recognition analysis of the high-energy tracks created by thermal neutron interactions in the converter.Main results. The resulting thermal neutrons equivalent dose was obtained using conversion factor (2.13(10) pSv·cm2) from thermal neutron fluence to thermal neutron equivalent dose obtained by Monte Carlo simulations. The calibrated detectors were used to characterize scattered radiation created by electron beams. The results at 12.0 cm depth in the beam axis inside of the water for a delivered dose per pulse of 1.85 Gy (pulse length of 2.4μs) at the reference depth, showed a contribution of flux of 4.07(8) × 103particles·cm-2·s-1and equivalent dose of 1.73(3) nSv per pulse, which is lower by ∼9 orders of magnitude than the delivered dose.Significance. The presented methodology for in-water measurements and identification of characteristic thermal neutrons tracks serves for the selective quantification of equivalent dose made by thermal neutrons in out-of-field particle therapy.

Proposal of thermal neutron flux monitors based on vibrating wire

Vibrating wires for beam diagnostics

Metal wire embrittlement monitoring by the measurement of wire oscillation frequency

Realization of a Thin Boron Layer Neutron Beam Monitor

Physical study of temperature measurement by neutron resonance absorption of tungsten

Monte Carlo simulation of a very high resolution thermal neutron detector composed of glass scintillator microfibers

Superconductor based, tomographic, neutron diagnostics for fusion power monitoring

Neutron imaging and spatial resolution evaluation of the boron-lined honeycomb neutron converter based detector

Parasitic neutron beam monitoring: proof of concept on gamma monitoring of neutron chopper phases

High Resolution Particle Beam Monitoring and Ionization Counters with the Help of Single Carbon Nanotubes

Simulation of the Neutron Transport Process and Establishment of the Neutron Monitoring Model Based on the Geant4

Neutronics simulations for the design of neutron flux monitors in SPARC

Target Multiwire for the Fermilab Booster Neutrino Beamline

Development of a silicon-based thermal neutron detection system

Establishment and Optimization of Angle Dispersive Neutron Diffraction Bulk Texture Measurement Environments

Registration of thermal neutrons using two-detector module based on silicon detectors and metallic gadolinium

Resistance of Hall Sensors Based on Graphene to Neutron Radiation

Development of fast 2.5 MeV neutron detectors for high-intensity stray magnetic field environments

High-resolution spatial mapping of a superconducting NbN wire using single-electron detection

Experimental research for the measurement of thermal neutron flux with gadolinium

Thermal neutron detection and track recognition method in reference and out-of-field radiotherapy FLASH electron fields using Timepix3 detectors