A method for reduction of propagation loss of surface plasmons. Experimental demonstration of the loss reduction for Fe/MgO/AlGaAs plasmonic structure integrated with AlGaAs/GaAs optical waveguide

V. Zayets,H. Saito,K. Ando,S. Yuasa
DOI: https://doi.org/10.1364/OE.23.012834
2015-01-12
Abstract:A method for the substantial reduction of propagation loss of surface plasmons was proposed and experimentally demonstrated. The method is based on the fact that the propagation loss of the surface plasmons depends significantly on the optical confinement of the plasmon. A plasmonic structure, which contains a metal and two dielectric layers of different refractive indexes, is proposed in order to optimize optical confinement and to reduce propagation loss of the surface plasmons. A low propagation loss of 0.17 dB/um for a surface plasmon in a Fe/MgO/AlGaAs plasmonic structure was achieved. A good coupling efficiency of 2.2 dB/facet between a surface plasmon in Fe/MgO/AlGaAs and a waveguide mode in AlGaAs/GaAs optical waveguide was demonstrated.
Optics
What problem does this paper attempt to address?
The problem that this paper attempts to solve is the loss problem of surface plasmons during propagation. Specifically, the author proposes a method to significantly reduce the propagation loss of surface plasmons and verifies it through experiments. The solution to this problem is of great significance for realizing high - efficiency integrated optical isolators, especially in optical communication systems, where such isolators can protect optical components from unwanted back - reflections. ### Background and Problem of the Paper 1. **Importance of Optical Isolators** - Optical isolators are key components in optical communication systems, used to prevent the reverse propagation of optical signals, thereby protecting optical elements from back - reflections. - In Photonic Integrated Circuits (PICs), integrated optical isolators are particularly important because integrated optical elements are more vulnerable to back - reflections. 2. **Limitations of Existing Technologies** - Traditional optical isolators use magneto - optical materials (such as magnetic garnet), but these materials are difficult to grow on semiconductor substrates, limiting their application in PICs. - Existing solutions (such as wafer bonding, sputtering, etc.) have made some progress, but still have deficiencies in terms of insertion loss, length, and bandwidth. 3. **Advantages and Challenges of Surface Plasmons** - Surface - plasmon isolators have good technical compatibility and a short length (a few micrometers), suitable for integration into PICs. - However, the surface - plasmon propagation loss in ferromagnetic metals is large, which is the main obstacle to realizing high - performance surface - plasmon isolators. ### Solutions 1. **Dual - Dielectric - Layer Structure** - The author proposes a structure that includes a metal and two dielectric layers with different refractive indices. By optimizing this structure, the optical loss of surface plasmons can be significantly reduced. - Experimental results show that in the Fe/MgO/AlGaAs structure, the surface - plasmon propagation loss is reduced to 0.17 dB/μm, which is 10 - 15 times less than that of the traditional single - dielectric - layer structure. 2. **Optical - Field Distribution and Loss Control** - The optical confinement and propagation loss of surface plasmons can be controlled by changing the conditions near the metal - dielectric interface. - Inserting a thin dielectric layer (such as MgO) can weaken the confinement of surface plasmons, thereby reducing the propagation loss. 3. **Experimental Verification** - The author verifies the effectiveness of this method through experiments, demonstrating long - distance surface - plasmon propagation and achieving a good coupling efficiency (2.2 dB/facet) between the waveguide mode and surface plasmons. ### Conclusions - By optimizing the dual - dielectric - layer structure, the propagation loss of surface plasmons can be significantly reduced, which is of great significance for realizing high - performance integrated optical isolators. - This method is not only applicable to magneto - optical surface - plasmon structures but can also be applied to other surface - plasmon devices that require low propagation loss. Through the above methods, the author has successfully solved the problem of surface - plasmon propagation loss, providing new ideas and technical support for the design and application of integrated optical isolators.