Abstract:Abstract Using a BEM-based hydraulic fracture model and the Coulomb frictional law, the generation of slip and shear rupturing produced by fluid injection is investigated. A wide range of factors can contribute to injection-induced seismicity. In addition to injection rate, fluid viscosity and existing permeability, several other factors are considered in this paper to determine their effects on slip development during continuous fluid injection and during shut-in. These factors include dilatant strengthening, slip weakening of frictional coefficients, structural complexities along a rupturing path like jogs and branches and the application of far-field wave-form stresses. The numerical method is summarized and the theoretical formulation of the above physical processes associated with generation of seismic events is provided. The numerical results show a rich and complex local slip rate change during extension of the slip zone. Under fluid injection, the slip can first produce a seismic event either caused by rapidly increasing pressure or by abrupt slip initiation, and then slows. When the permeability is large enough, the slip pattern manifests itself as long-term slow slip period coupled with aseismic slip transients. The long-duration and low-magnitude seismic events are associated with the slipping state in the conditionally stable regime, in which fluid pressure is marginally equal to a value required to produce slip using the effective stress and the static frictional strength. A small perturbation in the fluid pressure caused by any of the above factors can stop and/or generate relatively faster slip rates. The slip continues varying with time after shut-in in the presence of the above influencing factors. The slow slip on a fault, which is difficult to detect by seismology, could be a significant process in dissipating elastic strain energy during hydraulic fracturing stimulations. In addition, the model can capture a tendency of the slip rate to become significantly large. The results demonstrate the importance of fracture and fault permeability enhancement on variations of fluid pressure and slip rates.

An extended fracture mechanics-based model to simulate underground injection into multilayered rock strata

Instability Mechanism of Shallow Tunnel in Soft Rock Subjected to Surcharge Loads

Modeling of Injection Induced Seismic Events

Modeling Injection-Induced Fracture Propagation in Crystalline Rocks by a Fluid–Solid Coupling Grain-Based Model

Numerical Investigation of Injection-Induced Fracture Propagation in Brittle Rocks with Two Injection Wells by a Modified Fluid-Mechanical Coupling Model

An embedded fracture modeling framework for simulation of hydraulic fracturing and shear stimulation

Numerical Modeling of Fracture Height Propagation in Multilayer Formations Considering the Plastic Zone and Induced Stress.

Numerical Simulation of 3D Hydraulic Fracturing Based on an Improved Flow-Stress-Damage Model and a Parallel FEM Technique

Hydraulic Fracturing Mechanism of Rock Mass under Stress-Damage-Seepage Coupling Effect

Uncertainty Quantification for Evaluating the Impacts of Fracture Zone on Pressure Build‐up and Ground Surface Uplift During Geological CO 2 Sequestration

Application of a synthetic rock mass approach to the simulation of blasting-induced crack propagation and coalescence in deep fractured rock

Simulating progressive failure in fractured saturated rock under seepage condition using a novel coupled model and the application

Investigation of the Hydraulic Properties of Deep Fractured Rocks Around Underground Excavations Using High-Pressure Injection Tests

Injection-driven fracture instability in granite: Mechanism and implications

Influences of Fracturing Fluid Injection on Mechanical Integrity of Cement Sheath under Four Failure Modes

Modelling Rock Fracture Induced By Hydraulic Pulses

Role of hydro-mechanical coupling in excavation-induced damage propagation, fracture deformation and microseismicity evolution in naturally fractured rocks

Numerical modeling of gas injection induced cracking with unsaturated hydromechanical process in the context of radioactive waste disposal

Simulation Study on Rock Crack Expansion in CO2 Directional Fracturing

A Model for Hydraulic Fracture Growth Across Multiple Elastic Layers

Understanding the failure mechanism of a large underground cavern in steeply dipping layered rock mass using an enhanced ubiquitous-joint model