Abstract:The ballasted track superstructure is characterized by a relative quick deterioration of track geometry due to ballast settlements and the accumulation of sleeper voids. The track zones with the sleeper voids differ from the geometrical irregularities with increased dynamic loading, high vibration, and unfavorable ballast-bed and sleeper contact conditions. This causes the accelerated growth of the inhomogeneous settlements, resulting in maintenance-expensive local instabilities that influence transportation reliability and availability. The recent identification and evaluation of the sleeper support conditions using track-side and on-board monitoring methods can help planning prevention activities to avoid or delay the development of local instabilities such as ballast breakdown, white spots, subgrade defects, etc. The paper presents theoretical and experimental studies that are directed at the development of the methods for sleeper support identification. The distinctive features of the dynamic behavior in the void zone compared to the equivalent geometrical irregularity are identified by numeric simulation using a three-beam dynamic model, taking into account superstructure and rolling stock dynamic interaction. The spectral features in time domain in scalograms and scattergrams are analyzed. Additionally, the theoretical research enabled to determine the similarities and differences of the dynamic interaction from the viewpoint of track-side and on-board measurements. The method of experimental investigation is presented by multipoint track-side measurements of rail-dynamic displacements using high-speed video records and digital imaging correlation (DIC) methods. The method is used to collect the statistical information from different-extent voided zones and the corresponding reference zones without voids. The applied machine learning methods enable the exact recent void identification using the wavelet scattering feature extraction from track-side measurements. A case study of the method application for an on-board measurement shows the moderate results of the recent void identification as well as the potential ways of its improvement.

A model-based approach for joint estimation of track irregularities and track support modulus from trackside measurements in railway turnouts

Three-dimensional Finite Element Simulation on Moving Load Induced Track Response over Stiffness-varied Base

An Automated System for Position Monitoring and Correction of Chord-Based Rail Corrugation Measuring Points

Study of Ground Vibration from Trains Caused by Track Irregularities

Identification of track irregularities with the multi-sensor acceleration measurements of vehicle dynamic responses

Identification of Sleeper Support Conditions Using Mechanical Model Supported Data-Driven Approach

Measurement, analysis, and model updating based on the modal parameters of high-speed railway ballastless track

Identification of Behavioural Models for Railway Turnouts Monitoring

Determination of the Vertical Vibration of a Ballasted Railway Track to Be Used in the Experimental Detection of Wheel Flats in Metropolitan Railways

Track Irregularities Estimation Based on Acceleration Measurements

Dynamic vehicle–track interaction and loading in a railway crossing panel – calibration of a structural track model to comprehensive field measurements

Dynamic Response of Axle-boxes to Rail Unevenness Excitation due to Multiple Wheel-rail Interactions and Its Measurability Analysis

Monitoring of Railpad Long-term Condition in Turnouts Using Extreme Value Distributions

Quantitative Detection of Vertical Track Irregularities under Non-Stationary Conditions with Variable Vehicle Speed

Vold-Kalman Filter Order tracking of Axle Box Accelerations for Railway Stiffness Assessment

Experimental measurement of track irregularities in EMS maglev systems using the mid-chord offset method and inverse filtering technology

Vibration-Based Approach to Measure Rail Stress: Modeling and First Field Test

Railway track quality assessment method based on mechanism modeling

Dynamic Behaviour of a Railway Track with Initial Geometrical Irregularity Under the Action of a Moving Load

Analysis of Lateral Vibration Behavior of Railway Track at High Frequencies Using A Continuously Supported Multiple Beam Model

Track Irregularity Assessment in High-Speed Rail by Incorporating Carriage-Body Acceleration with Transfer Function