Abstract:Track structures are apt to generate degradation under repeated loading of train traffic. Avariation of support stiffness is one of the main degradations, such as unsupported sleepers and the transition position from embankment to a bridge, which occurred frequently. The service performance of track will decline including the comfort index of passengers and the safety of train in these areas. In order to understand the control standard of track stiffness variation, various models have been used to analyze the amplification of dynamic responses of track by researchers. The coupling effect of train and track structure was considered unnegligible in some researches. In this paper, an updated numerical model is developed based on track dynamic theory, in which the CA mortar and concrete base are both taken into consideration. The results were compared with the finite element model ( FEM) results based on ABAQUS software, in which the train loads are assumed as a series of constant loads. From the comparison, the influence of train-track interaction was presented. When the track has no irregularity or degradation, the wheel-rail contact loads are nearly constant, and the dynamic responses of track structure are the same in these two models. But if there are track stiffness variations,the results in train-track interaction model are larger than that in FEM,which means that the train-track interaction has an intensive effect. Besides the differences of track responses, the FEM cannot reveal the variation of contact forces and train responses, which are also essential to summarize the control standard of track degradation. At last, based on the train-track interaction model, various conditions of track stiffness variation are analyzed and discussed.

Dynamic Response of Axle-boxes to Rail Unevenness Excitation due to Multiple Wheel-rail Interactions and Its Measurability Analysis

Three-dimensional Finite Element Simulation on Moving Load Induced Track Response over Stiffness-varied Base

Dynamic Responses of Ballastless High-Speed Railway Due to Train Passage with Excitation of Uneven Trackbed Settlement

Theoretical investigation into the measurability of rail unevenness and corrugation using the dynamic response of axle box and bogie

Ground Vibration Caused by Axle Load and Dynamic Wheel-Rail Force of a Moving Train

Study of Ground Vibration from Trains Caused by Track Irregularities

Research on Load Characteristics of Axle-Box Bearing Raceway under Wheel-Rail Excitation

Track Irregularities Estimation Based on Acceleration Measurements

Dynamic Responses of a Poroelastic Half‐space from Moving Trains Caused by Vertical Track Irregularities

Vibration Characteristics of Defective Axle Box Bearings in High-Speed Trains under Track Irregularity Excitation

Technical Note: Three-dimensional analyses of dynamic responses of track-ground system subjected to a moving train load

Effects of the Dynamic Wheel–rail Interaction on the Ground Vibration Generated by a Moving Train

Railway track quality assessment method based on mechanism modeling

Measured dynamic load distribution within the in situ axlebox bearing of high-speed trains under polygonal wheel–rail excitation

Random Response Analysis of Axle-Box Bearing of a High-Speed Train Excited by Crosswinds and Track Irregularities

Railway Polygonized Wheel Detection Based on Numerical Time-Frequency Analysis of Axle-Box Acceleration

Quantitative Detection of Vertical Track Irregularities under Non-Stationary Conditions with Variable Vehicle Speed

Measurement, analysis, and model updating based on the modal parameters of high-speed railway ballastless track

Vibration Analysis of Axle Box Bearing Considering the Coupling Effects of Local Defects and Track Irregularities

Identification of track irregularities with the multi-sensor acceleration measurements of vehicle dynamic responses

Detection of Rail Fastener Assembly Defects Using Axle-Box Acceleration