Abstract:CO2 capture is essential for addressing dual-carbon strategies and achieving carbon neutrality. Membrane separation is favored for CO2 separation due to its high efficiency, low energy consumption, and operational convenience. Combining supported liquid membrane technology with ionic liquids (ILs) enables continuous CO2 separation from flue gas without requiring regeneration, simplifying processes, and reducing steps compared to pure IL absorption or adsorption methods. However, supported IL membranes suffer from liquid leakage. This study proposes a novel mechanism for CO2 capture using liquid-catched supported membranes (LCSMs). The LCSM was formed by adding a liquid-locking polymer layer to a porous support membrane. This study investigates the CO2 separation performance of LCSMs from the perspectives of material optimization and operational conditions. Sodium polyacrylate was selected as the liquid-locking polymer material based on molecular simulations. Experiments were conducted to investigate the effects of the support membrane type, liquid type, and liquid concentration on CO2 separation by LCSMs. Further experiments examined the influence of temperature, pressure, liquid concentration, and gas source composition on the separation performance of LCSMs. The optimal conditions for membrane fabrication and operation were determined. In addition, the transmembrane transport mechanism of CO2 separation using LCSMs was studied using molecular dynamics simulations, modeling analyses, and calculations. The simple solution-diffusion mechanism could not accurately describe the CO2 transmembrane transport behavior. A modified solution-ionization-diffusion mechanism was proposed to elucidate the CO2 transmembrane transport mechanism in LCSMs, showing good agreement with experimental results of CO2/N2 separation. Finally, a process for CO2 separation from the flue gas was developed. Preliminary calculations indicated that the capture energy consumption could be reduced to less than 2 GJ/tCO2, significantly lower than traditional absorption methods, with broader applicability and reduced footprint. This process is simpler, continuous, and less expensive. These results indicate that LCSMs are promising and novel methods for CO2 capture, offering an effective and economical solution for industrial applications.

A layered perovskite La1·5Sr0·5NiO4±δ-molten carbonate dual-phase membrane for CO2 capture from simulated flue gas

Design and development of 3D hierarchical ultra-microporous CO2-sieving carbon architectures for potential flow-through CO2 capture at typical practical flue gas temperatures

Bismuth doped Sr2Fe1.5Mo0.5O6-3 double perovskite as a robust fuel electrode in ceramic oxide cells for direct CO2 electrolysis

Superhydrophobic Ceramic Membrane Coupled with a Biphasic Solvent for Efficient CO2 Capture

A High-Permeance Supported Carbon Molecular Sieve Membrane Fabricated by Plasma-Enhanced Chemical Vapor Deposition Followed by Carbonization for Co2 Capture

Electrochemical Separation of CO2 from a Simulated Flue Gas with High-Temperature Ceramic–carbonate Membrane: New Observations

A Novel Cobalt-Free, CO2-stable, and Reduction-Tolerant Dual-Phase Oxygen-Permeable Membrane.

High Co2 Permeation Flux Enabled By Al(2)O(3) Modifier And In-Situ Infiltration Of Molten Carbonate Into Gd-Doped Ceo2 As A Co2 Separation Membrane

Oxygen Permeation Through a CO2‐tolerant Mixed Conducting Oxide (Pr0.9la0.1)2(ni0.74cu0.21ga0.05)o4+δ

Electrochemical Capture of CO2from Natural Gas Using a High-Temperature Ceramic-Carbonate Membrane

Preparation and Transmembrane Transport Mechanism of Liquid-Catched Supported Membranes with High CO2 Separation Performance

Rapid Glycine-Nitrate Combustion Synthesis of the CO2-stable Dual Phase Membrane 40mn1.5co1.5o4−δ–60ce0.9pr0.1o2−δ for CO2 Capture Via an Oxy-Fuel Process

A CO2-tolerance Oxygen Permeable 60ce0.9gd0.1o2−δ–40ba0.5sr0.5co0.8fe0.2o3−δ Dual Phase Membrane

Effect of molten carbonate composition on CO2 permeation mechanism

CO2-tolerant alkaline-earth metal-free single phase membrane for oxygen separation

Synthesis and Characterization of Gadolinium Doped Ceria-Carbonate Dual-Phase Membranes for Carbon Dioxide Separation

Influence of Ln elements (Ln = La, Pr, Nd, Sm) on the structure and oxygen permeability of Ca-containing dual-phase membranes

High CO2 permeability of ceramic-carbonate dual-phase hollow fiber membrane at medium-high temperature

Large-scale preparation of multilayer composite membranes for post-combustion CO2 capture

Remarkable O2 Permeation Through a Mixed Conducting Carbon Capture Membrane Functionalized by Atomic Layer Deposition

Progress and Perspectives in the Development of Inorganic-Carbonate Dual-Phase Membrane for CO2 Separation