Abstract:This paper introduces a novel three‐phase grid‐tied Multilevel Inverter (MLI) topology that employs a basic unit per phase, yielding a symmetrical configuration capable of generating 5‐level output voltage, and an asymmetrical configuration producing 7‐level and 9‐level output voltages. The generalization of the proposed MLI is presented in terms of the number of modules (M) and output levels (L). A comprehensive comparative analysis of the proposed MLI topology against existing configurations is presented for both symmetric and asymmetric cases. To achieve synchronization a PLL less Grid Voltage Modulated Direct Power Control (GVM‐DPC) technique is implemented. This paper also includes mathematical modelling of GVM‐DPC without PLL and the design of an LCL filter. This paper introduces a novel three‐phase grid‐tied multilevel inverter (MLI) topology that employs a basic unit per phase, yielding a symmetrical configuration capable of generating five‐level output voltage and an asymmetrical configuration producing seven‐level and nine‐level output voltages. The generalization of the proposed MLI is presented in terms of the number of modules (M) and output levels (L). A comprehensive comparative analysis of the proposed MLI topology against existing configurations is presented for both symmetric and asymmetric cases. The switching devices in the MLI are controlled using the in‐phase disposition level shift PWM (IPD‐LSPWM) technique. The synchronization of the grid‐tied MLI is addressed by considering the uncertainties in grid and load parameters at the point of common coupling (PCC). To achieve synchronization, a PLL‐less grid voltage‐ modulated direct power control (GVM‐DPC) technique is implemented. To mitigate the delay associated with PLL, a GVM‐DPC based on the stationary reference frame (SRF) is applied. This paper also includes mathematical modelling of GVM‐DPC without PLL and the design of an LCL filter. A simulation model of a 15‐kVA, three‐phase, nine‐level grid‐tied MLI is developed in MATLAB/Simulink and tested under both steady‐state and dynamic conditions. The proposed controller's performance is evaluated under the load variations and sudden changes in available power from the distributed generator (DG). Robustness is tested under adverse conditions such as voltage sag/swell at the PCC. Furthermore, the system is implemented in the OPAL‐RT OP4510 real‐time simulator, and the results are validated to confirm the effectiveness and robustness of the proposed grid‐tied MLI.

Design and implementation of a reduced switch seventeen-level multilevel inverter for grid integration of battery storage system

A High Step-up Multilevel Inverter with Minimized Components Featuring Self-balancing and Continuous Input Current Capabilities

Reduced Switch‐count Structure for Symmetric Multilevel Inverters with a Novel Switched‐dc‐source Submodule

Switched-capacitor Multilevel Inverter with Self-Voltage-balancing for High-Frequency Power Distribution System

Design and Implementation of Multilevel Inverter Topology with Reduced Switching Components

Design, implementation and validation of a new multi-level topology with fewer components

A Novel 19L Hybrid Multilevel Inverter System Synthesizes Reduced Number of Switches for Hybrid Renewable Energy Applications

New multilevel inverter based on reduced switch basic cell for high voltage levels

A PLL‐less grid‐tied three‐phase multilevel inverter with reduced device count and LCL filter

Single DC-link-based 5-level MLI topology for renewable and grid applications with fewer switches

A State of the Art of the Multilevel Inverters with Reduced Count Components

Implementation of the Fuzzy Logic Controlled 31‐Level Diode Switched Multilevel Inverter with Optimal Components for Solar PV‐Fed System

A Study of Level-Shifted PWM Single-phase 11-Level Multilevel Inverter

A 31 L multilevel inverter topology with less switching devices for hybrid electric vehicle applications

Symmetrical Cross-Connected T-Type Multilevel Inverter With Reduce Device Count

Performance Enhancement of Reduced Component Multilevel Inverter with Optimal Placement of Level Shifter

A Step‐up D‐type Multilevel Inverter Topology with Reduced Components Counts for Renewable Energy Applications

Reduced switch single source multilevel inverter topology for renewable photovoltaic system applications

An Interleaved Single-Stage Switched-Boost Common-Ground Multilevel Inverter: Design, Control, and Experimental Validation

Design and Implementation of a High-gain Switched-capacitor Step-up Multi-level Inverter with Reduced Components Count

Advancements in Multilevel Inverters for Efficient Harnessing of Renewable Energy: A Comprehensive Review and Application Analysis