Abstract:Shape-stabilized phase change materials (SSPCM) offer significant potential in industrial applications, effectively addressing corrosion and thermal stress issues associated with phase change material (PCM) at high temperatures. To advance the large-scale development of SSPCMs, this study innovatively proposes the wet-state extrusion and sintering method to prepare SSPCM particles (SSPCM-P) and characterize them. Solar salt is the PCM, while calcined dolomite is the skeletal support material (SSM). Results indicate successful fabrication of SSPCM-P with salt content below 60 wt% post-sintering, a lower threshold than those achieved via cold-pressing and hot-sintering methods. This is because, during wet mixing and evaporation, salts migrate to the surface of the sample and mixtures with high salt content on the surface tend to bond together during sintering. SEM observations reveal a transparent interface between SSM and PCM pre-sintering, whereas post-sintering, PCM uniformly adheres to the SSM surface, with smaller particle sizes demonstrating enhanced densification. SSPCM-P shows commendable chemical stability, with the enthalpy of melting/solidification for SSPCM-P with 60 % salt content slightly below the theoretical value at 63.6/63.3 J/g. Charging and discharging experiments highlight significantly improved thermal properties of SSPCM-P compared to sensible heat materials, enabling oil heating to higher temperatures. SSPCM-P can maintain stability during recirculation. Furthermore, it is noted that SSPCM-P is unsuitable for vapour applications due to salt precipitation, making direct contact heat transfer with vapour unfeasible. As a solution, the study proposes the application of SSPCM-P in finned tube heat exchangers to circumvent chemical incompatibility issues with heat transfer fluid, leveraging its compact size, ease of preparation, and stacking capabilities. These pivotal findings present new industrial solutions for SSPCM preparation, promising significant technological advancements in energy storage and heat transfer.

Spent Yeast-Derived 3D Porous Carbon Skeleton as Low-Cost D-Mannitol Supporting Material for Medium Temperature Thermal Energy Storage

Expanded Vermiculite/D-Mannitol as Shape-Stable Phase Change Material for Medium Temperature Heat Storage

Synthesis and properties of nanoencapsulated D-mannitol for medium temperature thermal energy storage

Form-stable phase change material embedded with chitosan-derived carbon aerogel

Design of Diatomite-Based Hydrated Salt Composites with Low Supercooling Degree and Enhanced Heat Transfer for Thermal Energy Storage

Diatomite: A Promising Natural Candidate As Carrier Material for Low, Middle and High Temperature Phase Change Material

Preparation and characterization of shape-stable phase change particles: A new option for high-temperature thermal energy storage

Polyethylene Glycol/Expanded Vermiculite Shape-Stabilized Composite Phase Change Materials for Thermal Energy Storage

A novel composite phase change material of high-density polyethylene/d-mannitol/expanded graphite for medium-temperature thermal energy storage: Characterization and thermal properties

Carbon nanotube/nickel foam-mannitol phase change composite material for medium-temperature solar energy storage and conversion

Biomass-based Shape-Stabilized Phase Change Materials from Artificially Cultured Ship-Shaped Diatom Frustules with High Enthalpy for Thermal Energy Storage

Economical and shape-stabilized hydrated salt/bagasse biomass-derived carbon phase change composite for thermal energy storage

Development of Renewable Biomass-Derived Carbonaceous Aerogel/Mannitol Phase-Change Composites for High Thermal-Energy-Release Efficiency and Shape Stabilization

Enhanced thermal properties of novel shape-stabilized PEG composite phase change materials with radial mesoporous silica sphere for thermal energy storage

Thermally Conductive and Shape‐Stabilized Polyethylene Glycol/Carbon Foam Phase‐Change Composites for Thermal Energy Storage

Shape-stabilized Phase Change Materials Based on Fatty Acid Eutectics/expanded Graphite Composites for Thermal Storage

Hierarchical 3D Reduced Graphene Porous-Carbon-Based PCMs for Superior Thermal Energy Storage Performance

Enhanced solar/electric-to-thermal energy conversion capability of double skeleton based shape-stabilized phase change materials

Sol-Gel Condensation of Temperature Sensitive and Shape Stabilized Phase Change Materials for Thermal Energy Storage

Research on Dolomite-Based Shape-Stabilized Phase Change Materials for Thermal Energy Storage: Feasibility Study of Raw and Calcined Dolomite As Skeleton Support Materials

CH3COONa·3H2O/flaky modified vermiculite composite phase change materials enhanced phase change behavior and thermal storage through curing lotus root starch modification