Abstract:All-solid-state batteries (ASSBs) are considered to be a next-generation energy storage concept that offers enhanced safety and potentially high energy density. The identification of solid electrolytes (SEs) with high ionic conductivity was the stepping-stone that enabled the recent surge in activity in this research area. Among the various types of SEs, including those based on oxides, sulfides, polymers, and hybrids thereof, sulfide-based SEs have gained discernible attention owing to their exceptional room temperature ionic conductivity comparable even to those of their liquid electrolyte counterparts. Moreover, the good deformability of sulfide SEs renders them suitable for reducing the interfacial resistance between particles, thereby obviating the need for high-temperature sintering. Nevertheless, sulfide-based ASSB technology still remains at the research stage without any manufacturing schemes having been established. This state of affairs originates from the complex challenges presented by various aspects of these SEs: their weak stability in air, questions surrounding the exact combination of slurry solvent and polymeric binder for solution-based electrode fabrication, their high interfacial resistance resulting from solid particle contacts, and limited scalability with respect to electrode fabrication and cell assembly. In this Account, we review recent developments in which these issues were addressed by starting with the materials and moving on to processing, focusing on new trials. As for enhancing the air stability of sulfide SEs, strengthening the metal–sulfur bond based on the hard–soft acid–base (HSAB) theory has yielded the most notable results, although the resulting sacrificed energy density and weakened anode interface stability would need to be resolved. Novel electrode fabrication techniques that endeavor to overcome the critical issues originating from the use of sulfide SEs are subsequently introduced. The wet chemical coating process can take advantage of the know-how and facilities inherited from the more established lithium-ion batteries (LIBs). However, the dilemmatic matter of contention relating to the polarity mismatch among the slurry solvent, SE, and binder requires attention. Recent solutions to these problems involved the exploration of various emerging concepts, such as polarity switching during electrode fabrication, fine polarity tuning by accurate grafting, and infiltration of the electrode voids by a solution of the SE. The process of using a dry film with a fibrous binder has also raised interest, motivated by lowering the manufacturing cost, maintaining the environment, and boosting the volumetric energy density. Finally, optimization of the cell assembly and operation is reviewed. In particular, the application of external pressure to each unit cell has been universally adopted both in the fabrication step and during cell operation to realize high cell performance. The effect of pressurization is discussed by correlating it with the interface stability and robust interparticle contacts. Based on the significant progress that has been made thus far, we aim to encourage the battery community to engage their wide-ranging expertise toward advancing sulfide-based ASSBs that are practically feasible.This article has not yet been cited by other publications.

Solvent-Free Fabrication of Freestanding Inorganic Solid Electrolyte Membranes: Challenges, Progress, and Perspectives

Solvent-Free Approach for Interweaving Freestanding and Ultrathin Inorganic Solid Electrolyte Membranes

Priority and Prospect of Sulfide‐Based Solid‐Electrolyte Membrane

Fabrication of Sub-Micrometer-Thick Solid Electrolyte Membranes of Beta-Li3ps4 Via Tiled Assembly of Nanoscale, Plate-Like Building Blocks

Fabrication of 60μm-Thick Free-Standing Bilayer Solid Electrolytes for Solid-State Batteries Using Solution Processing and Lamination

In Situ Fabrication of Solvent-Free Solid Polymer Electrolytes for Wide-Temperature All-Solid-State Lithium Metal Batteries

Scalable fabrication of Solvent‐Free composite solid electrolyte by a continuous Thermal-Extrusion process

Understanding the Mechanical Behavior of Sulfide Solid Electrolyte Membranes for Practical Applications in All-Solid-State Batteries

Fusion Bonding Technique for Solvent‐free Fabrication of All‐solid‐state Battery with Ultra‐thin Sulfide Electrolyte

Recent Progress in All-Solid-State Lithium−Sulfur Batteries Using High Li-Ion Conductive Solid Electrolytes

Recent Progress in Organic–Inorganic Composite Solid Electrolytes for All‐Solid‐State Lithium Batteries

Inorganic solid electrolytes for all-solid-state lithium/sodium-ion batteries: recent developments and applications

Design Strategies, Practical Considerations, and New Solution Processes of Sulfide Solid Electrolytes for All‐Solid‐State Batteries

Forming Artificial Solid-Electrolyte-Interfaces between Lithium Metal Anodes and Halide and Sulfide Solid Electrolytes in All-Solid-State-Batteries Via Spatial-Atomic-Layer-Deposition

Thin and Flexible Solid Electrolyte Membranes with Ultrahigh Thermal Stability Derived from Solution-Processable Li Argyrodites for All-Solid-State Li-Ion Batteries

Solvent-Free Process for Blended PVDF-HFP/PEO and LLZTO Composite Solid Electrolytes with Enhanced Mechanical and Electrochemical Properties for Lithium Metal Batteries

Recent Advancements in High-Performance Solid Electrolytes for Li-ion Batteries: Towards a Solid Future

Slurry‐Fabricable Li+‐Conductive Polymeric Binders for Practical All‐Solid‐State Lithium‐Ion Batteries Enabled by Solvate Ionic Liquids

Issues and Advances in Scaling up Sulfide-Based All-Solid-State Batteries

A panoramic view of Li7P3S11 solid electrolytes synthesis, structural aspects and practical challenges for all-solid-state lithium batteries