Abstract:To promote the innovation of raw magnesium production technology, an integrated calcination and silicothermic reduction short process for magnesium production was experimentally studied on the laboratory scale in this article. The influences of the thermal decomposition temperature, silicothermic reduction temperature, pelletizing pressures and silicon ratio on the characteristics of producing the magnesium by the short process was studied. The crosslinking effect, including reactions between CO2 decomposed from dolomite and metal elements in ferrosilicon, microstructure change at thermal decomposition and silicothermic reduction stages, was analyzed and discussed. In addition, comparison of the magnesium reduction rate and production efficiency between the new short process and the traditional Pidgeon process was made. The results indicated that the decomposition and reduction temperatures have a more significant influence on the magnesium reduction process than the pelletizing pressure and silicon ratio. A decomposition temperature < 1000 °C and reduction temperature > 1100 °C was proven to be favorable for improving the magnesium reduction rate and production efficiency of the new short process. It was also found that the integrated short process for magnesium production can reach the same total reduction rate and has lower efficiency compared to the traditional process. The decrease of magnesium production efficiency in the new short process was expected to result from reduction of the contact area and hindering of diffusion between CaO·MgO molecules and Si(Fe) atoms because of the microstructure change and ferrosilicon consumption by the reactions between CO2 and metal elements in ferrosilicon. Preparing briquettes with additives of binder or ultrafine particles of raw materials was proposed and considered for further study to improve the production efficiency.

The Preparation of Magnesium from Magnesia by Using Atmospheric Microwave Al-C Reduction Method

Experimental Study of Magnesium (Mg) Production by an Integrated Calcination and Silicothermic Reduction Short Process

Preparation and Characterization of MnFe2O4 by a Microwave-Assisted Oxidative Roasting Process

Microwave idrothermal synthesis of magnesium-aluminium spinel

Smelting Magnesium Metal using a Microwave Pidgeon Method

The effects of solvent and microwave on the preparation of Magnesium Oxide Precursor: The effects of solvent and microwave on the preparation of Magnesium Oxide Precursor

Preparation of Nano Magnesium Oxide by Mechanochemical Method Using Magnesium Chloride

Phase stability and microstructure morphology of microwave-sintered magnesia-partially stabilised zirconia

Preparation of activated magnesium oxide defluorination adsorbents by microwave radiation method

Fabrication of Y2O3-doped MgO Refractory Raw Materials Based on Magnesium Hydroxide from Salt-Lake Brine

Thermodynamic Analysis and Processing Evaluation of Magnesium Preparation by Thermal Reduction Method

Attempts on preparing mesoporous basic material MgO/SBA-15

Facile and rapid synthesis of nanoplates Mg(OH)2 and MgO via Microwave technique from metal source: structural, optical and dielectric properties

Preparation of hydromagnesite via reactive crystallization under microwave irritation

Promoting Effect of Microwave Field on Gas Phase Diffusion Limited Magnetite Reduction in Carbon Monoxide

Effect of Microwave on the Crystallization Process of Hydromagnesite

Novel Efficient Reduction Route for Magnesium Production Using Silicothermic Process

Preparation of high purity magnesium by vacuum gasification-directional condensation technology

Preparation of Ccalcining MgO and its precursor

Preparation of High-Purity Ultrafine Magnesium Hydroxide Using Solid-State Reaction Method

Production of Primary Magnesium by the Aluminothermic Reduction of Magnesia Extracted from Dolomite Ore