Abstract:Starting with the initial design stage, the ship resistance constitutes one of the most important hydrodynamic aspects. In order to generate and optimize the body lines plan, the ship resistance performance must be considered. In this case, both numerical and experimental methods must be applied to obtain the minimum ship resistance controlled by the speed domain. In the last years, numerical studies based on the Computational Fluid Dynamic (CFD) were implemented in the initial ship design stage in order to analyse the free-surface flow and to predict the ship resistance. The numerical optimization process of the hull forms must be validated by means of the experimental model tests in the specific towing tanks. The constant evolution of the numerical and experimental methodologies can be noted. As a consequence, the accuracy level of the ship resistance prediction is increased; though, difficult numerical problems can occur in case of the unconventional hull forms. Taking into account this aspect, a complex numerical and experimental investigation of the ship resistance problem and free-surface topology was performed in the case of the DTMB surface combatant. A parallel numerical simulation was carried out by using the viscous flow solver ISIS–CFD of the software FINE TM /Marine provided by NUMECA. The solver is based on the finite volume method to build the spatial discretization of the transport equation to resolve the Reynolds-Averaged Navier Stokes (RANS) equation. Closure to turbulence is achieved by making use of the k-ω SST model, while the free-surface is captured through an air-water interface based on the Volume of Fluid (VOF) method. For the validation purpose, the tank conditions are reintroduced in the numerical model to account for any banking effect, especially for the high speed cases. Experimental model tests were performed in accordance with the ITTC standard procedures, while the extrapolation process to the full-scale was obtained by using an in-house code, based on the ITTC 57 method. The experimental results are compared through with some internationally recognized towing tank experiments that have been performed for a similar ship model, showing a good agreement. Also, the numerical results are validated against the experimental data and showed to be within a satisfactory congruence.

A theoretical and numerical determination of optimal ship forms based on Michell's wave resistance

Numerical Implementation and Validation of the Neumann–Michell Theory of Ship Waves

Hydrodynamic optimization of ship hull forms

Hull Form Multi-Objective Optimization for a Container Ship with Neumann–Michell Theory and Approximation Model

Hydrodynamic Performance Optimization of Ship Hull's Forebody

Numerical and Experimental Investigation on the Free-surface Flow and Total Resistance of the DTMB Surface Combatant

Hull Form Optimization for Reduced Calm-Water Resistance and Improved Vertical Motion Performance in Irregular Head Waves

Numerical Study of Viscous Wave-Making Resistance of Ship Navigation in Still Water

A Practical Hydrodynamic Optimization Tool for the Design of A Monohull Ship

Multi-objective optimization for a surface combatant using neumann-michell theory and approximation model

Hull Form Optimization of Wave-Making Resistance in Different Speeds for a Luxury Cruise Ship

Neumann-Michell Theory-Based Multi-Objective Optimization of Hull Form for A Naval Surface Combatant

Hull form optimization for reduced resistance and improved seakeeping via practical designed-oriented CFD tools

Practical Steady-Ship-flow Evaluation for Hull-Form Optimization

Numerical Study of A Slender-Ship Theory of Wave Resistance

Thin or bulky: optimal aspect ratios for ship hulls

Neumann–Michell Theory of Short Ship Waves

Ship Optimization Design of the Resistance and Seakeeping Performance Based on CFD

Comparative study on steady wave-making problem using viscous and potential-flow methods

Numerical Study of Resistance Performance of Super-Slender Catamaran in High Speed

Practical Evaluation of the Drag of a Ship for Design and Optimization