Buckling Analysis of Tubular Strings with Connectors Constrained in Vertical and Inclined Wellbores
Wenjun Huang,Deli Gao,Yinghua Liu
DOI: https://doi.org/10.2118/180613-pa
2018-01-01
SPE Journal
Abstract:Summary A new concept is proposed in the local tubular mechanical model, which provides a more-sophisticated description of tubular mechanical behaviors from a local perspective. The principles and assumptions for the local mechanical model are presented. Under these assumptions, the mechanical behaviors of tubular strings with connectors under nonbuckling/lateral-buckling, interhelical-buckling, and intrahelical-buckling modes in vertical and inclined wellbores are studied. The critical interhelical-buckling and intrahelical-buckling loads are deduced with the assumed load-displacement curve and potential-energy factor. The contact states under every buckling mode are divided into no contact, point contact, and wrap contact, and the critical contact loads are deduced with critical contact conditions. The results of critical buckling loads, critical contact loads, contact forces, and maximum bending moments are compared, and these results are given in explicit forms for the convenience of application. The results show that buckling mode transforms from nonbuckling/lateral buckling to interhelical buckling to intrahelical buckling, and contact state transforms from no contact to point contact to wrap contact with the increase of axial force. The effects of connectors on buckling behaviors are determined by both the geometric and mechanical parameters of tubular strings with connectors. Connectors can inhibit the buckling problem and increase the axial force and torque transfer, but may increase the possibility of tubular failure. Therefore, these two effects of connectors should be considered comprehensively in the optimal design of connectors on tubular strings.