Abstract:An increasing number of experiments require the use of ultrasensitive nanomechanical resonators. Relevant examples are the investigation of quantum effects in mechanical systems [1] or the detection of exceedingly small forces as in Magnetic Resonance Force Microscopy (MRFM) [2]. The force sensitivity of a mechanical resonator is typically limited by thermal fluctuations, which calls for detection methods capable of operating at ultralow temperature. Commonly used interferometric techniques, despite their excellent sensitivity, may not be an optimal choice at millikelvin temperatures, because of unwanted resonator heating caused by photon absorption. Although alternative detection techniques based on microwave cavities [3] [4] [5] have shown to perform better at ultralow temperature, these techniques still suffer from the fact that the detection sensitivity decreases as the power input is decreased. Here, we present a measurement approach based on the detection, through a Superconducting Quantum Interference Device (SQUID), of the change of magnetic flux induced in a coil by the motion of a magnetic particle attached to a resonator. This detection scheme avoids direct heating of the resonator, as it does not involve reflecting optical or microwave photons to the resonator. By cooling an ultrasoft silicon resonator to 25 mK, we achieve a force noise of 0.5 aN in a 1 Hz bandwidth. We believe this detection technique can in principle be used even at sub-millikelvin temperatures. Furthermore, it could be used to improve the sensitivity of MRFM experiments, which aim at three dimensional imaging at atomic resolution.

MicroSQUID Force microscopy in a dilution refrigerator

Scanning SQUID microscopy in a cryogen-free dilution refrigerator

Scanning SQUID-on-tip microscope in a top-loading cryogen-free dilution refrigerator

Implementing Microwave Impedance Microscopy in a Dilution Refrigerator

Design and performance of an ultra-high vacuum scanning tunneling microscope operating at dilution refrigerator temperatures and high magnetic fields

Scanning SQUID microscopy in a cryogen-free cooler

Scanning SQUID susceptometers with sub-micron spatial resolution

A Scanning Superconducting Quantum Interference Device Microscope for Room Temperature Samples

Characterization of Two Fast-Turnaround Dry Dilution Refrigerators for Scanning Probe Microscopy

Cryogen-free variable temperature scanning SQUID microscope

MicroSQUIDs based on V/Cu/V Josephson nanojunctions

Room Temperature Sample Scanning Squid Microscope for Imaging the Magnetic Fields of Geological Specimens

Magnetic, thermal, and topographic imaging with a nanometer-scale SQUID-on-cantilever scanning probe

A compact ultrahigh vacuum scanning tunneling microscope with dilution refrigeration

High resolution low-temperature superconductivity superconducting quantum interference device microscope for imaging magnetic fields of samples at room temperatures

An automated and versatile ultra-low temperature SQUID magnetometer

A subKelvin scanning probe microscope for the electronic spectroscopy of an individual nano-device

MilliKelvin microwave impedance microscopy in a dry dilution refrigerator

A SQUID based read-out of sub-attoNewton force sensor operating at millikelvin temperatures

Scanning Squid Sampler with 40-Ps Time Resolution