Abstract:MoS2 is one of the important members of transition metal dichalogenides which is emerging as a potential 2D atomically thin layered material for low power electronic and opto-electronic applications. However, for MoS2 a critical fundamental question of significant importance is how the surface energy and hence the wettability is altered in nanoscale -- in particular, the role of crystal quality in low dimensions. Present work reports the synthesis of large area MoS2 films on insulating substrates with different surface morphology via vapor phase deposition by varying the growth temperatures. The crystallinity of the samples is examined by transmission electron microscopy and Raman spectroscopy. From contact angle measurements, it is possible to correlate the wettability with crystallinity at nanoscale. The specific surface energy for few layers thick MoS2 is estimated to be around 46.5 mJ/m2. Our results shed light on the MoS2-water interaction which is significant for developing important devices based on MoS2 coated surfaces for micro-fluidic applications.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is: **How to adjust the surface energy and wettability of synthetic MoS₂ thin films by control, especially the influence of crystal quality on the wettability of low - dimensional materials at the nanoscale**. Specifically, the paper explores the following points: 1. **The relationship between surface energy and wettability**: - By changing the growth temperature, MoS₂ thin films with different morphologies were synthesized, and the surface energy of these films and its influence on wettability were studied. - Special attention was paid to the influence of the crystal quality of MoS₂ at the nanoscale on its wettability. 2. **Experimental methods and characterization**: - Using techniques such as high - resolution transmission electron microscopy (HRTEM) and Raman spectroscopy, the microstructure and crystallinity of MoS₂ thin films at different growth temperatures were characterized in detail. - Through contact angle measurements, the wettability of MoS₂ thin films was quantitatively analyzed. 3. **Theoretical models and calculations**: - Using Neumann's method and combining the contact angle measurement data of different liquids, the surface free energy of MoS₂ thin films was estimated. - Research shows that as the growth temperature increases, the MoS₂ thin films gradually change from hydrophilic to hydrophobic, which is closely related to their crystal quality and surface morphology. 4. **Application prospects**: - The paper points out that understanding the wettability of MoS₂ is of great significance for the development of microfluidic devices based on MoS₂ - coated surfaces. - These research results are helpful to promote the application of MoS₂ in low - power - consumption electronics, optoelectronics, microfluidics and other fields. In summary, this paper aims to deeply study the variation rules of the surface energy and wettability of MoS₂ by controlling the synthesis conditions of MoS₂ thin films, and provide theoretical basis and technical support for the design and optimization of related devices in the future.

Surface Energy Engineering for Tunable Wettability through Controlled Synthesis of MoS2

Morphology Engineering in Monolayer MoS2‐WS2 Lateral Heterostructures

Synthesis of Large-Area Single- to Few-Layered MoS2 on an Ionic Liquid Surface

Controllable Regulation of MoS2 Surface Atomic Exposure for Boosting Interfacial Polarization and Microwave Absorption

Two-dimensional electronic transport and surface electron accumulation in MoS2

Electrochemical Surface Modification of a 2D MoS2 Semiconductor

On the nature of wettability of van der Waals heterostructures

Chemical Vapor Deposition Synthesized Atomically Thin Molybdenum Disulfide with Optoelectronic-Grade Crystalline Quality

Engineering the Edges of MoS2 (WS2) Crystals for Direct Exfoliation into Monolayers in Polar Micromolecular Solvents

Synthesis And Fast Transfer Of Monolayer Mos2 On Reusable Fused Silica

Towards Low-Temperature CVD Synthesis and Characterization of Mono- or Few-Layer Molybdenum Disulfide

Application-Oriented Growth of a Molybdenum Disulfide (MoS2) Single Layer by Means of Parametrically Optimized Chemical Vapor Deposition

Synthesis and Characterization of Large Area Few-layer MoS2 and WS2 Films

Wafer-scale MoS2 with water-vapor assisted showerhead MOCVD

Achieving Adsorbate-Free Monolayered MoS 2 Field Effect Transistors by Controlled Surface Gas Treatment

Minimizing the Water Effect in Synthesis of High-Quality Monolayer MoS 2 Nanosheets: Implications for Electronic and Optoelectronic Devices

Direct and Scalable Chemical Vapor Deposition of Ultrathin Low-Noise MoS2 Membranes on Apertures

Large Area Vapor Phase Growth and Characterization of MoS2 Atomic Layers on SiO2 Substrate

Selective Surface Modification and Layer Thinning of MoS 2 via Ultraviolet-Light Irradiation in an Ionic Solution: Implications for Multifunctional Nanoelectronic Devices

Template-free scalable growth of vertically aligned MoS2 nanowire arrays meta-structural films towards robust superlubricity

Controllable Growth Of Monolayer Mos2 By Chemical Vapor Deposition Via Close Moo2 Precursor For Electrical And Optical Applications