Abstract:In recent years, with the prohibition of CFC by international community, the cascade refrigeration cycle is showing the development of new features, in which Auto-cascade refrigeration cycle with its simple structure, reliable performance particularly has aroused widespread concern. This paper puts forward using the distillation column instead of the multi-stage segregation device, which make full use of the distillation column to provide good enough conditions for the vapour-liquid contact,creat a greater contact surface, ensure the space and time of heat and mass transfer between each component of refrigerant and lubricant, in order to achieve high efficient separation.This cycle uses environment-friendly non-azeotropic mixed (NARM) R600a\R23\R50 as refrigerant. The improved PT equation is used, according to the quality and energy conservation of the distillation column and heat exchanger to carry on thermodynamic analysis. On this basis, the selection and the calculation of the experimental apparatus and equipment carried out to self-made a auto-cascade refrigeration cycle prototype. Through the cooling test of the eight different mixture ratio, the best quality ratio is found and the minimum temperature the ratio can reach. Through repeated experiments, study that the cycle compression ratio of one component affect on the temperature inside the ultra-low temperature box, the cycle compression ratio of the different components under the same temperature inside the ultra-low temperature box affect on the system performance, and the three throttle, cold boxes cycle high and low pressure ratio and distillation column reflux liquid extraction rate affect on the system performance. The prototype broke the traditional method that access to the depth refrigeration needs multiple refrigeration compressors, only use a single-stage air-conditioning refrigeration compressor with lubrication, to achieve high and low boiling point component through the use of distillation devices, including high-performance lubricant separation, successfully reduced to below -80 degrees C, and system stability. According to the results of a series of experiments, analyzed the ratio of working fluid, cycle pressure ratio, distillation column extraction rate of liquid return, increase heat and the expenditure component's effect on the temperature in the ultra-low temperature box and the COP of system.

Experimental investigation and simulation on dynamic precipitation characteristics of R32-lubricating oil mixture in heat pump systems

Experimental study on the cycle performance of refrigerant R32

Theoretical Study on A Novel R32 Refrigeration Cycle with A Two-Stage Suction Ejector

Preliminary study on the performance of the diffusion absorption refrigerator operating with the mixed refrigerant

Investigating the Thermal-Hydraulic Performance of New Refrigerant Mixtures Through Numerical Simulation of Minichannel and Microchannel Evaporators

A thermodynamic analysis of a transcritical cycle with refrigerant mixture R32/R290 for a small heat pump water heater

Experimental and Theoretical Assessments on the Systematic Performance of a Single-Stage Air-Source Heat Pump Using Ternary Mixture in Cold Regions

Experimental Study on New Variable Composition Heat Pump System

SIMULATION AND COMPARISON OF AIR-SOURCE HEAT PUMPS USING VARIABLE COMPOSITION AND CONSTANT COMPOSITION MIXTURES OR PURE REFRIGERANT

A Study On A New Auto-Cascade Refrigerating Cycle

Investigation on the influence of lubricant oil to the spray cooling system based on refrigerant cycle

An experimental investigation of oil circulation ratio influence on heating performance in an air condition heat pump system for electrical vehicles

Application Research for Pump-driven Loop Heat Pipe System Using R32 to Replace R22

Experimental Research on the Performance of a Refrigerant Generating Bubble Pump Based on a Diffusion Generation Process with H2O HCOOK-R134a

Dynamic Characteristics of Refrigerant and Lubricant in R290 Rolling Piston Compressor of Low-Temperature Air to Water Heat Pump (LT-AWHP) During Defrosting Cycle

A mechanistic model for nucleate boiling heat transfer performance with lubricant-refrigerant mixture

Dynamic model and response characteristics of liquid desiccant air-conditioning system driven by heat pump

Experimental study of the lubricant-refrigerant flow in a rotary compressor

Numerical Research on R32/R1234ze(E) Air Source Heat Pump under Variable Mass Concentration

Molecular dynamics simulations of nanodroplet evaporation of refrigerants

Dynamic Modeling and Operation Characteristics Analysis of LiBr Absorption Heat Pump